Power Tools
Flex Expands Its 24V Platform with Four New Tools for the Trades
A four-port rapid charger, a compact impact driver, a compact drill driver, and a deep cut bandsaw fill out Flex's stack lithium 24V cordless platform.
Independent reviews
Product Reviews and Buying Guides – 78 / 805
From everyday tech and home products to lifestyle and specialist gear, each review focuses on practical use, strengths, limitations, and who the product suits.
Power Tools
Flex 24V Power Tools: The New Pro-Focused Lineup Worth Knowing About
Stacked Lithium batteries, a rear handle circular saw, a one-handed recip saw and more: a closer look at what Flex's professional 24V platform brings to the job site.
Power Tools
Flex 24V Power Tools: The Good, The Bad, and The Ugly
An honest look at the Flex 24V cordless line: who backs it, what it does well, and the trade-offs to weigh before you invest.
Power Tool Accessories
Flex 24V Quick-Attach Table Saw Stand: A Stable Home for Your Portable Saw
Flex's compact Quick-Attach stand gives the 24V table saw a proper, height-adjustable cutting platform you can set up in minutes.
Power Tools
Flex 24V Rear Handle Circular Saw Review: A Top-Tier Worm Drive Contender
After hands-on testing against the best rear handle circular saws on the market, the Flex 24V stands out as the strongest performer we have used, with a few trade-offs worth knowing about.
Power Tools
Flex 24V Reciprocating Saw Review: Smooth Cutting With a Battery Caveat
A compact, impressively low-vibration reciprocating saw undermined by battery reliability questions, offset by surprisingly easy warranty support.
Power Tools
Flex 24V Stack Lithium 4-Battery Charger: Four Batteries at Once, Finally
A four-port charger with 1,120W of output, 50% faster charging than a standard charger, and Stack Pack integration.
Power Tools
Flex 24V Stacked Lithium Battery: A Closer Look at the Pouch Cell Upgrade
Flex's new 24V Stacked Lithium batteries promise higher power output, longer run time, and faster charging in a smaller package. We look at how they performed against Flex's own round cell packs.
Power Tools
Flex 24V Clearance Deals: 16 Pro-Grade Cordless Tools at Unbelievable Prices
Flex 24V tools are being cleared out at dramatically reduced prices, with discounts of up to 70 percent across saws, drills, impact wrenches, routers, and nailers.
Power Tools
Flex 24V Tool Deals: Five Cordless Kits at Half Off
Five Flex 24V cordless kits, from a sidewinder circular saw to a four-tool combo kit, all at steep discounts with a lifetime warranty option.
Power Tools
Flex 24V vs Makita 40V XGT Hammer Drill: Head-to-Head Comparison
Two flagship cordless hammer drills go head-to-head in torque, wood drilling, and concrete tests, with a look at specs, size, weight, and price.
Power Tools
Flex 24V vs Rigid Rear Handle Circular Saw: A Deep Cut Comparison
The Flex 24V rear handle circular saw with stacked lithium battery technology goes head to head against the newest Rigid rear handle saw in heavy, treated-lumber testing.
Power Tool Accessories
Flex Angle Grinder Cutting and Flap Discs: Two New Abrasives Worth a Look
A hands-on look at Flex's new 4-1/2 inch cutting disc and its see-through flap disc line, including the controversy over the notched design.
Power Tools
Flex Batteries and the Warranty Experience: What Happens When Packs Go Wrong
Two Flex batteries developed a strange charging fault, and the replacement process turned out to be one of the best warranty experiences in the power tool industry.
Power Tool Accessories
Flex Bonded Abrasives Roundup: Seven Angle Grinder Discs Worth a Look
Flex expands its abrasive line with 14 new bonded products, including the ultra-thin Razor Slice and a transparent flap disc that lets you see your work while you grind.
Power Tools
Flex Compact Drill Lineup: Drill, Hammer Drill, and Impact Driver Tested
Flex's new compact drill, hammer drill, and impact driver promise lighter bodies with real power. We put all three through auger bits, cinder block, concrete, and big lag screws.
Power Tools
Flex Pro-Grade Compact Drill vs Hammer Drill: Which One Should You Buy?
Two drills that look nearly identical from the front, but one hides a hammer mode that changes everything. Here is how to choose between the Flex Pro-Grade Compact Drill and the Flex Pro-Grade Hammer Drill.
Power Tools
Flex Compact Impact Wrench Prototypes: How They Stack Up Against DeWalt, Milwaukee, and Hyper Tough
Two pre-release Flex compact impact wrenches went head to head with the DeWalt DCF921, Milwaukee M18 and M12, and a budget Hyper Tough. Here is what the numbers and teardown revealed.
Power Tools
Flex Cordless Table Saws: 8-1/4 Inch vs 10 Inch Compared
Flex has launched two cordless table saws with rack and pinion fences, LED fence lighting, and hybrid battery or AC power. Here is how the 8-1/4 inch and 10 inch models differ and which one fits your shop.
Power Tools
Flex Launches Two Cordless Table Saws: FX 7211 Compact and FX 7221 10-Inch
Flex enters the cordless table saw market with an 8-1/4 inch compact model and a 10-inch saw that can cut 4x4 lumber in a single pass.
Power Tools
Flex and DeWalt Battery Starter Kits: Bundles With Free Tools Worth a Look
Two tool platforms, three starter kits, and some genuinely strong bundle offers. Here is what each kit includes and who it makes sense for.
Power Tools
Flex FX1 1472 Review: A Gen 2 Half-Inch High Torque Impact Wrench That Punches Way Above Its Price
The Flex FX1 1472 half-inch high torque impact wrench brings big torque numbers, all-metal construction, and a $249 bare price, but a few quirks are worth knowing before you buy.
Power Tools
Flex FX2241 One-Handed Reciprocating Saw: A Compact Powerhouse for Tight Spaces
Flex's 24V one-handed reciprocating saw punches well above its size in wood, EMT, and PVC cuts, earning a 9.5/10.
Power Tools
Flex FX7141AZ 12" Dual Bevel Sliding Miter Saw: Cordless Cutting Power on the Flex 24V Platform
A 12-inch dual bevel sliding miter saw running on the Flex 24V battery platform, with an LED shadow line, a 49 lb build, and an optional AC adapter for all-day cutting.
Power Tools
Flex Launches Two New Table Saws: FX 7211Z and FX 7221Z First Look
Flex expands into the carpentry and framing market with an 8-1/4 inch compact table saw and a 10-inch model that can reportedly cut 4x4 lumber in one pass.
Power Tool Accessories
FLEX Impact Driver Bit Set Review: Strong Selection, but Precision Has a Price
A hands-on look at the FLEX impact driver bit set, including its six-inch bit holder, clip-together cases, and how the bits compare with established brands.
Tool Accessories
Flex Impact Shield Multimaterial Drill Bit Set Review: One Bit for Wood, Tile, Concrete and Metal
A 10-piece impact-rated carbide-tipped multimaterial drill bit set that punches well above its price, with a few small trade-offs to know about first.
Power Tools
Flex Tool Deals Worth Knowing About: Impact Driver, Drill, Storage, and a DeWalt Bonus
A practical look at current Flex 24V tool bundles, the Stack Pack storage system, and a DeWalt PowerStack kit with a free tool offer.
Tools & Workshop
Three Flex Metalworking Picks: Ultra-Thin Cutting, Smarter Flap Discs, and Stackable Storage
A closer look at the Flex Razor Slice cutting disc, Site Max flap disc, and Stack Pack rolling box, and what each one actually solves on the job site.
Power Tools
Flex 24V Nailers and Staplers: A Full Lineup Breakdown
A close look at the full range of Flex 24V cordless nailers and staplers, from the 23 gauge pin nailer to the 3/8 inch stapler, with what works and what to think about before buying.