Work Gear

Milwaukee Hexon Heated Gloves Review: Warm Hands for All-Day Winter Work

A closer look at Milwaukee's Hexon heated gloves, including battery setup, heat placement, sizing quirks, and the smart swipe feature that mostly misses.

Milwaukee Hexon heated gloves with batteries and USB-C cables on concrete

Introduction

Cold hands can end a workday early, and ordinary winter gloves rarely cut it when you are standing outside for hours. The Milwaukee Hexon heated gloves aim to solve that with battery-powered heat, ripstop construction, and reinforcement where gloves usually wear out first. This review covers how they work, where the heat actually lands, how the sizing runs, and a few quirks worth knowing before you spend your money.

Batteries, Charging, and Everyday Use

The gloves run on two 2 amp hour batteries, one for each hand. Charging is done over USB-C, and the kit includes two batteries and two USB-C to USB-C cables. The batteries slide into ports at the back of each glove, zip up, and stay out of the way. On top of each battery there is a simple fuel gauge, and there is not much weight to them.

Heated work gloves laid on a workshop bench with batteries and USB-C cables

They are thin and light for their capacity, which makes them a sensible fit for gloves and possibly other heated gear. One thing to note: there are no charging boxes included, so you will have to provide your own. That said, a dual USB-C output works well, and charging in the truck between jobs is easy. Milwaukee claims all-day wear and all-day battery life, and long-term battery durability is the main open question, since previous red lithium USB packs did not always hold up.

Heat Output and Heat Placement

Turn them on with a push and hold, and they heat up quickly. There are three heat levels, and the red indicator lights stay lit the whole time the gloves are running, which makes the current level easy to check at a glance.

Close-up of a gloved hand pressing a power button with small red indicator lights

Heat placement is thoughtfully done. The warmth concentrates in the fingers on top and a little across the back of the hand, with no heat in the palm. That is a smart choice for working hands, since heat in the palm is exactly where you start sweating when gripping tools. Even indoors at around 60 degrees on high, the gloves felt genuinely warm.

Materials and Dexterity

The shell uses ripstop material, and the palm appears to be a leather or vinyl-style material that is padded where it matters. Grip is solid, and dexterity for winter gloves is excellent. Flex openings on the back of the hand add room to move, and the cuff adjusts to fit whether you wear a coat sleeve over or underneath.

One feature that underdelivered: the smart swipe index finger. On this pair, controlling a phone was inconsistent at best. Occasional things happened, but not deliberately, and not reliably on either glove. If touchscreen control matters to you, temper your expectations.

Sizing and Fit

Sizing is measurement-based, so measure before buying. For the 2XL tested here, Milwaukee lists a hand length of roughly 8.5 to 9 inches and a width of about 4.625 to 5 inches. That is a wide spread, and a hand that fits one dimension may not fit the other.

Gloved hand stretching open to show fit and flexibility across the knuckles

In practice, the tested 2XL felt neither loose nor tight, with little extra space, but hands at the wider end of the range would find it snug. Going smaller than your measurement seems unwise, as stretching the glove makes the whole fit feel tighter. Measure the length of your hand and go from there.

Who Should Buy Them

At $199, the kit sits reasonably when you consider competing gloves that lack reinforcement in the wear zones or ripstop material. They are wind-resistant too, though they are not all-leather like many snowmobile gloves, so they lean more toward work use than recreation.

Worker with gloved hands clearing snow in cold morning light

These suit anyone in genuinely cold weather who needs a dependable set of heated gloves: snow blowing, plow truck work, or long stretches outside where you are not constantly handling small parts. If your jobs are short and you tend to sweat in gloves, lighter pairs may still be the better call.

Conclusion

The Milwaukee Hexon heated gloves heat up fast, place warmth where it helps and not where it hurts, and come as a complete two-battery kit. The smart swipe feature is unreliable on this pair, and sizing demands careful measurement, but for all-day cold-weather work the package makes a strong case. Durability of the batteries over many charge cycles is the next thing worth watching.

Product link

View more details for Milwaukee Hexon Heated Gloves

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Milwaukee Hexon Heated Gloves

Further reading

Related Reviews

Three pairs of knee pads in different styles arranged on a concrete surface

Work Gear

Best Knee Pads for Work and Overland Kits: Three Options Compared

Knee protection is easy to overlook until your knees start complaining. Here are three knee pad options with different strengths for work, overlanding, and backup kits.

10/2/2026
Assorted leather and synthetic work gloves arranged on a concrete workshop surface

Work Gear

Best Work Gloves Tested: Which Pairs Are Actually Worth Your Money?

We compare 17 work glove brands across grip, cut resistance, durability, impact protection, puncture resistance, and comfort to find the real value picks.

10/2/2026
Five pairs of work suspenders arranged on a concrete workshop floor

Work Gear

Best Work Suspenders: Five Options From Budget Clips to Lifetime Leather

Five suspenders for working men, from an entry-level clip-on to a handcrafted leather Y-back built to outlast everything else in the closet.

10/2/2026