Touring Skis

Faction La Machine 3 Review: A Light Touring Ski With Real Downhill Range

A 109 mm touring ski with a Paulownia and carbon build, a 21 m turn radius and a playful freeride personality. Here is what to know before buying.

Pair of wide touring skis with pale wood topsheets standing upright on a concrete surface

Introduction

The Faction La Machine 3 is a touring ski that refuses to pick one side of the sport. At 109 mm underfoot it sits in the wider half of the backcountry category, yet its build keeps the weight at a level that still makes long ascents realistic. That combination is the whole point: enough surface area to float in fresh snow, and enough precision to stay composed when the terrain turns technical or the snow firms up.

Ski tourer ascending a skin track on an alpine slope at first light

Where many wide skis lean on mass to feel stable, this one leans on materials instead. The result is a ski that stays quick and agile on the way up while remaining playful on the way down, which is a rarer pairing than the numbers alone suggest.

It is a dedicated backcountry shape and profile rather than a lightened resort ski, and that distinction shapes everything about how it skis.

Who this product is for

This ski suits riders who tour specifically to reach fresh, open terrain and want a wide platform waiting for them at the top. If your idea of a good day is climbing to a distant peak and dropping into untouched snow, the La Machine 3 is built around exactly that plan.

It also makes sense for skiers who want one wide ski that covers powder, softer technical lines and firmer snow without feeling like a compromise in any of those conditions.

It is less suited to riders who chase the absolute lowest possible weight. There are lighter touring skis available, and if uphill efficiency is the only metric that matters, those alternatives deserve a look.

Main strengths

Paulownia and carbon build

The core is Paulownia, a lightweight wood that blends low density with a relatively stiff flex. Faction adds two layers of carbon to that mix, so the ski carries a decent amount of energy despite its modest weight. The reason it does not feel punishingly stiff comes down to a relatively thin core profile, which keeps the ski light while the higher-end materials deliver an efficient, energetic uphill ride. A full sidewall runs through the ski, with only a slight taper to cap at the very tips and tails, which gives it an upper-end feel underfoot.

Close-up of a ski sidewall, edge and base layers resting in fresh snow

On the scale, the 184 cm length comes in at 1,605 g. That is not sub-1,500 g territory, but the combination of width and downhill capability makes the figure a sensible one, and it still leaves a ski that climbs efficiently.

Shape, rocker, and float

The profile is deliberately bowed, with some camber but not a lot. A heavy dose of camber in a ski with this stiff a wood and carbon construction would tend to feel twitchy, so the more relaxed profile keeps it amenable to creative freeride and freestyle skiing instead.

The taper is dramatic, with the widest point pulled well back into the ski, producing a round, fairly straight and flat tip shape that carries a good amount of flotation. Rocker begins a little lower than the taper and leads to pronounced splay, so the tip pops up out of the snow quickly.

The 21 m turn radius is longer than a pure powder shape would suggest, and that works well on a tour because the ski tracks a straighter line between you and your objective. On the descent, it gives you more control over the shape and duration of each turn, which makes drifting, smearing and playful riding easier, especially given how light the ski feels underfoot.

Things to consider before buying

Tail profile and skin grip

The tail is longer than you might expect on a touring ski, and it carries more splay than the flatter tails typically used to keep more skin in contact with the snow. Faction has gone its own way here. The loss of uphill grip is marginal at best, but it is one of those details that stands out when you are looking closely at a touring ski.

Close-up of a climbing skin and tail clip on a touring ski in soft snow

The taper shape itself is fairly straight, with a slightly rounder finish at the end, and there is a skin fixation point at the back. In practice this is a tail that rewards a confident, drifty style more than a locked-in carve.

Binding and boot pairing

Because the ski is light, the rest of the setup matters more than usual. Tech pin bindings paired with a lightweight touring boot keep the theme going and make the uphills more efficient. A hybrid approach, such as a shift-style binding or a heavier freeride binding with an alpine boot that has a walk mode, extracts more power on the descent but adds weight back into the system.

Going lighter is generally the better match, particularly if you spend most of your time in fresh, deep snow where highly technical gear matters less than it does on hardpack.

Buying advice

If you are building a setup around this ski, think about the terrain you actually ski most often. The La Machine 3 covers an unusually wide range for a touring ski, handling soft fresh powder, technical lines and firmer snow all within its comfort zone, though there are wider skis that deal with the very deepest days a little better. Pair it with a light binding and boot if efficiency is the priority, and accept the modest weight penalty if you would rather have more downhill power.

Skier standing on a summit ridge above an untouched powder bowl

Riders who want a single wide ski that tours well and still offers precision will find the balance convincing. Those who already own a dedicated powder ski may find more value in a narrower, lighter touring option for bigger vertical days.

Conclusion

The Faction La Machine 3 is a well-rounded touring ski for riders who want flotation and downhill composure without a punishing uphill penalty. Its Paulownia and carbon construction keeps the weight reasonable and the flex energetic, the shape floats readily while staying precise, and the longer turn radius suits the way most tours actually ski. It is neither the lightest option available nor the widest, but the blend is a genuinely useful one for freeride touring.

Product link

View more details for Faction La Machine 3

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Faction La Machine 3

Further reading

Related Reviews

Lightweight touring skis with wood-toned topsheet standing against a concrete wall

Touring Skis

Atomic Backland 100 Review: A Light Touring Ski That Still Holds an Edge

The Atomic Backland 100 is the lightest of Atomic's three 100mm-underfoot skis. Here is how its carbon build, tapered tail, and setup options shape the buying decision.

10/14/2026
Six touring skis standing upright on a snow-dusted wooden rack

Touring Skis

Best Touring Skis 2025: Six Standout Picks from Lightest to Heaviest

A practical roundup of six touring skis, from featherweight uphill tools to confident freeride performers, with real weights, prices, and on-snow characteristics.

10/14/2026
Row of lightweight backcountry touring skis with tech bindings leaning against a pale concrete wall

Touring Skis

Best Touring Skis 2026: Seven Lightweight Options Compared

Seven lightweight touring skis compared, from uphill-focused builds to descent-oriented shapes, with practical guidance on weight, flex, turn radius, and binding choice.

10/14/2026