Touring Skis
Elan Ripstick Tour 104 Review: A Lightweight Backcountry Touring Ski
A detailed look at the Elan Ripstick Tour 104, a lightweight touring ski with a single tip-to-tail carbon rod, a 104 mm waist, and a playful, smeary ride in soft snow.
Introduction
The Elan Ripstick Tour 104 is a dedicated touring ski that leans firmly toward the backcountry side of the spectrum. Where several hybrid models try to split the difference between lift-served laps and human-powered days, this one is built around uphill efficiency first, with a downhill personality that stays playful rather than punishing.
It is also the first signature pro model in the Ripstick range. The construction borrows from the wider Ripstick line and then changes it in a few meaningful ways: a TubeLite wood core, a single carbon rod running tip to tail through the middle of the ski rather than two carbon tubes along the edges, and an additional carbon laminate for a lively, flexible flex pattern. At 180 cm it weighs 1,516 grams, just north of the 1,500-gram mark.
Who This Ski Is For
This is a ski for people who plan their season around touring. There is not a lot of resort application here compared with hybrid skis such as the Enforcer Unlimited or the Blizzard Hustle, which are designed to be skied in bounds as well. The Ripstick Tour 104 sits further toward the touring end, and that is the point.
If your days involve skinning, long approaches, and hunting for soft snow, the priorities line up well. If you mostly ride lifts and want one ski to do everything, this is probably not the right match.

It also helps to be honest about the kind of snow you chase. This ski is at its best in soft, deep conditions and open terrain where a long turn radius has room to work, so riders who split their time between groomed runs and powder will feel the difference quickly.
Main Strengths
The Ripstick Tour 104 is defined less by a single number than by how its parts work together: a light core, a simple carbon structure, and a long, straight sidecut that rewards a relaxed, patient style in soft snow.
Lightweight Build and Carbon Core
The TubeLite wood core provides the base, and the carbon layout is what gives the ski its character. Instead of the two carbon tubes that run along the sides of the standard Ripstick skis, this model uses one carbon rod that runs from tip to tail through the center of the ski, visible in the forebody and again in the tail before it thickens underfoot. A second carbon laminate adds to the flex.
The result sits at the lighter and more flexible end of the spectrum, carrying a freeride and freestyle mentality into a touring shape. At 1,516 grams in the 180 cm length, it stays close to the weight threshold that keeps long ascents manageable.

That construction also keeps the ski feeling lively rather than damp, which suits riders who like to play with the terrain instead of simply charging straight through it.
Turn Shape, Rocker, and Powder Performance
The dimensions are 129 mm at the shovel, 104 mm underfoot, and 122 mm in the tail, giving only a seven-millimeter drop from the shovel. That near-straight cut produces a long turn radius of 23 meters. The rocker profile is fairly centered: plenty of camber underfoot, a moderate and fairly symmetrical rocker up front, and a long, low rocker in the tail. The shovel and forebody carry a similar character to the Ripstick 106, just in a lighter build.
In powder, the long arc makes the ski easy to smear and easy to pivot sideways, so turn shapes and styles can be changed at will. On a big peak with a fresh field below, that wider canvas is exactly what you want.
Things to Consider Before Buying
Terrain Focus and Resort Limitations
The touring-first design comes with trade-offs. Because the ski is built around uphill efficiency and soft-snow performance, it has limited appeal for riders who want a single ski for lift-served days. Anyone shopping for a do-everything setup should look at the hybrid end of the market instead.

That focus also shapes how the ski should be sized and how the value case works out. A rider who tours regularly will use the light core and the tip and tail skin attachments constantly. A rider who gets out a handful of times a season may find a heavier hybrid ski easier to justify.
On-Edge Feel and Turn Radius
The 23-meter radius takes some adjustment. Tip it onto edge and it will commit you to a long arc, which can feel unusual if you are used to shorter-radius skis. The instinct is to let the ski take over, but it does not really work that way: it needs a deliberate, patient input.
Riders who enjoy that long, arcing feel will get along with it immediately. Riders who want quick, tight edge-to-edge transitions should expect a learning period before the ski feels natural underfoot.
Buying Advice
Two things make this ski easy to recommend for the right rider. The first is the skin attachment at the tip and tail, which supports the long approaches that define touring. The second is the weight: at 1,516 grams in the 180 cm length, it keeps the uphill side reasonable without giving up a fun, smeary descent.

Match it to the terrain you actually ski. If your season is mostly human-powered and you value a playful, surfy feel in soft snow over on-piste precision, the Ripstick Tour 104 blends uphill efficiency with downhill fun as well as anything in its class. If you need one ski to cover resort days too, a hybrid model will serve you better.
Conclusion
The Elan Ripstick Tour 104 is a focused touring ski with a distinctive build: a single tip-to-tail carbon rod, a TubeLite wood core, a 104 mm waist, and a long 23-meter radius that rewards a relaxed, smeary style in powder. It is light enough for serious approaches and playful enough to enjoy on the way down, provided your days are spent in the backcountry rather than on the lift.
Product link
View more details for Elan Ripstick Tour 104
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Elan Ripstick Tour 104