Touring Skis
Dynastar M-Tour 108 Review: A Lightweight Touring Ski Built for Soft Snow
A dedicated 108 mm touring ski with a paulownia and polyurethane core, basalt reinforcement, and a strongly rockered tip. Here is who it suits and what to check first.
Introduction
The Dynastar M-Tour 108 is a lightweight touring ski built around a clear idea: keep a 108 mm waisted ski efficient enough to climb on, then let it float when the descent finally arrives. It returns with an updated graphic, and the underlying design stays aimed squarely at skiers who spend most of their time hunting deep, fresh snow.
That focus shows up in the numbers and the shape. At 108 mm underfoot with a strongly rockered tip, the M-Tour 108 sits at the soft-snow end of the touring spectrum rather than in the in-and-out-of-bounds hybrid category. It is a directional ski, and it is at its best on more aggressive, more technical lines where the way down matters as much as the way up.

For skiers who already know they want a dedicated backcountry setup, this is a purpose-built option rather than a compromise. It does not try to be a one-ski resort quiver.
Who this product is for
This ski is aimed at touring-focused skiers who prioritize fresh snow. It is designed to be paired with a touring-specific boot and binding, and it rewards that kind of dedicated setup rather than resisting it.
It makes the most sense for people who tour in areas that receive a lot of snow and who want a light ski that still holds up on steeper, more technical terrain. The stiff tail in particular supports confident, energetic skiing when the snow is soft and the line is committing.
It is a less obvious choice for riders who want one ski to cover both lift-served days and the occasional tour. The width and the touring-specific build point in a single direction.
Main strengths
The headline strength is the balance between low weight and genuine soft-snow performance. For a ski this wide, the M-Tour 108 stays remarkably light, which matters most on long approaches and repeated laps.

It also brings useful composure to the descent. A stiffer flex, particularly in the tail, gives the ski a dependable feel when you need edge grip and energy out of a turn, and the shape is clearly optimized for flotation rather than groomer carving.
Lightweight Construction and Materials
The core combines paulownia wood with a hybrid construction that places polyurethane along the sides of the ski and paulownia through the middle. It is a blend of lightweight materials that still behaves like a proper ski rather than a fragile weight-saving exercise. Basalt fibers are added to increase stiffness and to quiet the ride, which helps on firmer snow where a pure paulownia core can start to feel loud.
Weight is listed at 1,574 g in the 179 cm length. For a ski with a 108 mm waist, that sits on the lighter side of the spectrum, and it is a big part of why the ski pairs so naturally with lighter touring boots and bindings.
Shape and Soft-Snow Performance
The profile is where the M-Tour 108 separates itself. There is positive camber underfoot, but the tip carries a long, gradual rocker line that leads into a pronounced, freeride-oriented taper. The widest point of the ski is brought well down toward the shovel, so the entire front section is devoted to flotation.

The tail takes the opposite approach. It is flatter and more squared than the tip, which keeps more skin in contact with the snow on the climb and improves uphill efficiency. That split personality, a floaty front end and an efficient rear end, is what makes the ski feel purpose-built for touring rather than adapted from a resort design.
Things to consider before buying
The M-Tour 108 is at its best in a dedicated touring setup, and that means budgeting for a touring-specific boot and binding rather than expecting it to work with an existing inbounds kit. It is a more specialized tool than a hybrid ski, and it behaves that way.
Firm snow is not the priority here. The rockered, tapered tip and the wide platform are tuned for soft conditions, so anyone who spends most of their days on hardpack will find better matches elsewhere. The construction helps calm the ride on firmer surfaces, but the ski is still clearly designed around fresh snow.
Width is worth a moment of thought as well. At 108 mm underfoot it can feel like more ski than necessary for a resort-based touring application, though skiers in genuinely snowy regions will likely appreciate the extra surface area.
Buying advice
Buy this ski if you tour often, ski soft snow most of the time, and want a light platform that still feels confident on technical descents. The combination of a low listed weight and a stiff tail is unusual at this width, and it is the reason the ski appeals to riders who do not want to give up downhill performance to save grams.

Think of it as the centerpiece of a dedicated backcountry setup. Pair it with a touring-specific boot and binding, and the whole system makes more sense than the ski does in isolation. If your plans lean toward lift-served days with occasional touring, a narrower or more hybrid-oriented ski will likely serve you better.
For skiers whose season revolves around chasing fresh snow in the backcountry, the M-Tour 108 is a coherent, well-resolved choice that knows exactly what it is for.
Conclusion
The Dynastar M-Tour 108 is a lightweight 108 mm touring ski with a paulownia and polyurethane core, basalt reinforcement, and a strongly rockered, tapered tip. It is directional, it is happiest in soft snow, and it is built for a dedicated touring setup. If that describes your skiing, it is a compelling option worth putting on your shortlist. If you split your time between the resort and the backcountry, look for something more versatile.
Product link
View more details for Dynastar M-Tour 108
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Dynastar M-Tour 108