Arylic B50 Review: A $150 Amplifier With an Unusually Deep Feature Set

Introduction

The Arylic B50 is a small integrated amplifier that sells for around $150, and it has dipped closer to $127 during promotional pricing. For that money it bundles a speaker amplifier rated at 50 watts into 4 ohms, HDMI eARC, optical, USB, and Bluetooth inputs, a phono stage, a subwoofer output, a remote control, and a companion app with tone controls.

That combination is genuinely uncommon at this price. It is also the source of most of the B50’s quirks, because fitting that many features into a budget chassis means every individual part has to compromise somewhere. The result is a product that is easy to recommend for one specific job and just as easy to steer someone away from for another.

This review covers what the B50 does well, where it struggles, and which buyers should actually consider it.

Who the Arylic B50 Is For

Think of the B50 as a second-room amplifier rather than the centerpiece of a serious two-channel system. It suits a spare bedroom, a cabin, a compact apartment setup, or any space where a television, a pair of small speakers, and a turntable need to coexist without much budget or shelf space.

It is also one of the more affordable ways to move away from a soundbar while keeping proper stereo speakers, and it makes sense for a rental property or a room where you want one box to handle several jobs.

If your main goal is the best possible sound for the money and you do not need HDMI switching or a phono input, a simpler music-first amplifier will serve you better. The B50’s appeal is breadth, not refinement, and that distinction shapes everything below.

Main Strengths

Setup is straightforward. With 4 ohm speakers rated at 89 dB sensitivity, the B50 drove them comfortably to peaks around 75 to 85 dB, which covers normal listening in a small to medium room. It is not a powerhouse, but for efficient speakers at reasonable levels it holds its own.

A Genuinely Full Feature Set

The HDMI eARC input worked without fuss once the unit was awake, and the subwoofer output also worked as expected. At this price, HDMI eARC integration is rare enough that it alone makes the B50 worth a look for television use.

The phono stage is modest but usable. Compared with the built-in phono stage of an entry level turntable, it landed in similar territory, which means an older turntable or one without its own preamp can be connected without sounding poor.

The B50 also includes Bluetooth transmission, so audio coming into the amplifier can be sent out to a pair of Bluetooth headphones or a Bluetooth speaker. That is a genuinely useful option for late-night listening.

There is no music streamer built in, and that is arguably a benefit here. You are not paying for a streaming platform you may not want, and a dedicated streamer can be added later if you decide you need one.

Tone Controls That Actually Work

The app’s tone controls, including a mid-range adjustment, are the reason the B50 can sound decent across a range of speakers. It was used with 4 ohm bookshelf speakers and with a harder-to-drive pair, and the mid-range control was what made the second pairing workable.

The controls are still fairly heavy handed, but they are far more usable than the coarse tone controls on the more expensive Arylic H50, where anything beyond a couple of steps fell apart. Here you can dial the sound in rather than simply tolerate it.

Things to Consider Before Buying

The most annoying behavior is sleep. The B50 goes to sleep fairly quickly, and when the television is switched back on it does not automatically return to HDMI eARC mode. Sound stays silent until you pick up the remote, use the front panel, or open the app, and there is no setting to keep it permanently awake.

That single behavior shapes the ownership experience more than any specification. For a household where the amplifier is used casually and often, expect to reach for the remote regularly.

The App’s Bass Boost and Bluetooth Reliability

The bass boost in the app is the least useful feature in the package. It applies an aggressive lift, roughly 12 to 20 dB somewhere in the low hundreds of hertz, and on 4 ohm speakers that roll off around 80 Hz it swamps the mid-range badly. Even pulling the bass control back around 8 dB was needed to make it tolerable, so treat bass boost as a feature to leave alone.

Bluetooth transmission worked, but it was inconsistent and lost connection often. When it held, it held fine, but it is a convenience rather than something to rely on.

Sound Quality Compared With Music-First Amplifiers

Do not buy the B50 expecting it to match dedicated music amplifiers. Simpler amplifiers from brands such as Fosi Audio, Aiyima, and WiiM cost similar money or slightly more and will sound better for pure music listening, and matching the B50’s feature set elsewhere costs considerably more.

The B50 also uses speaker binding posts rather than line outputs, so it cannot easily serve as a preamp feeding a separate, more capable power amplifier. Buyers who want to grow a system over time should note that limitation up front.

Buying Advice

Buy the B50 for its feature set, not for its sonic ceiling. At around $150, and especially when it drops near $127, it delivers HDMI eARC, a phono stage, a subwoofer output, app-based tone control, and enough power for efficient 4 ohm speakers. That is a strong package for a secondary room, a rental property, or a soundbar replacement.

If music quality is your only priority, spend your budget on a dedicated music amplifier instead. If you want one compact box that handles a television, a turntable, and a pair of speakers with reasonable expectations, the B50 is easy to justify.

Conclusion

The Arylic B50 is a compromise product done reasonably well. It is not the amplifier to build a serious two-channel system around, but as a compact, feature-dense hub for a second room or a television setup it earns its price. Keep your expectations aligned with the price and it will quietly do its job.