Ulsa Tools LED Neck Light 1568 Review: A Hands-Free Light With a Magnetic Trick Up Its Sleeve

Introduction

Neck lights are a simple idea: two light heads on a flexible band that rests around your neck, leaving both hands free. Ulsa Tools, based in Canada, has pushed the concept further with its LED Neck Light 1568, adding USB-C charging, stepless dimming, and a magnetic base that turns it into far more than a wearable light. After spending time with it, the design feels like a genuine evolution in this category.

What It Is and How It Works

At its core, the Ulsa LED Neck Light is a flexible cable with two independent LED heads at the ends. You wear it around your neck, over your ears, or simply set it down as a small spotlight. Earlier neck light designs used disposable batteries; this one moves to a rechargeable 2200 mAh lithium battery with USB-C charging, which is where things get practical.

Each side has a button, but the unit operates as one continuous system: either button turns both lights on or off and cycles the brightness, so you never have to fiddle with two separate controls.

The lighting is flexible too. It starts at 180 lumens on low or 360 lumens on high, and holding a button down cycles through the full dimming range from dimmest to brightest until you find the level you want. Turn it off and start again, and the cycle resets. For a light meant to be adjusted mid-task, that simplicity matters.

Battery Life and Charging

Ulsa quotes roughly 3 hours of runtime on high at 360 lumens and about 6 hours on the 180 lumen low setting. Charging is over USB-C, and the battery includes standard overcharge and over-discharge protection, so leaving it plugged in overnight is not a problem. It should be ready for another full day of work.

The Magnet Changes Everything

The standout feature is a magnet on the back of the unit. Stick it on anything metal and it stays put. That is genuinely useful in an engine bay: attach it to an open hood, the side of the car, or a piece of the engine, then aim the flexible arms exactly where you need light. The twin beams reminded me of microscope light pipes, designed to illuminate dark recesses that ambient shop lighting cannot reach.

You can also stretch an arm out like a flashlight on a rod to reach down into tight spaces, or bend it down to spotlight something specific, like pulleys or connectors, without any trouble.

Who Should Buy It

If you work under vehicles, the neck light solves a real problem: the area under a car is lit while the recessed cavities stay dark, and this light fills those shadows so you can see inside easily. The small profile makes it easy to maneuver, and the on/off controls are simple to use while working.

It also works well for anyone who does close-up work in dim conditions, whether that is mechanical repair, hobbies, or crafts, provided the magnetic or wearable format suits your workflow.

Buying Advice

The Ulsa Tools LED Neck Light 1568 earns its keep through thoughtful details: one-button operation, stepless dimming, USB-C rechargeable battery with protection circuitry, and the magnetic back that transforms it from a wearable light into a mountable one. Check the Ulsa site for current availability and part number 1568 before buying, and consider whether the 3 to 6 hour runtime covers your typical work sessions.

Conclusion

The Ulsa Tools LED Neck Light 1568 is a simple design executed well, and the magnetic base plus flexible arms make it more versatile than most neck lights on the market. For under-vehicle inspection and engine bay work in particular, it is an easy recommendation.