Six DeWalt Tech Accessories Worth a Look: Chargers, Speakers, and a Workbench Mat

Introduction

DeWalt has been quietly expanding beyond power tools into everyday tech, and the newest batch of accessories covers a surprising range: wall and car chargers, a powered workbench stand, two portable speakers, and a bench protection mat. The appealing part is that none of these require you to already own DeWalt battery tools. They are aimed at anyone who spends time in a garage, workshop, or job site and wants gear that feels appropriately rugged.

We tested each one in real use, measuring charging output where it mattered and living with the speakers and mat on an actual bench. Here is how they stack up.

DeWalt Two-Port Pro 100W Wall Charger

This dual USB-C wall charger is built like a small brick. It is noticeably large and heavy, with the rubber overmold DeWalt uses on its tougher electronics, which makes it feel reassuringly solid rather than lightweight. The two USB-C ports are each rated at 100W, and it is clearly intended to handle laptops as well as phones.

In testing, a power-hungry gaming laptop pulled about 89W, close to but not quite the full 100W rating. On the phone side, a device that supports 60W charging reached roughly 59W when the battery was low, then naturally tapered as it filled up. That tapering is normal charging behavior, not a charger flaw, but it is worth knowing before you expect maximum speeds at every moment.

One important detail: the two ports share the total output. If you plug a cable into both ports at once, each device gets roughly half, so it is not 100W per port simultaneously. Single-device charging is where this unit shines.

It is also the kind of charger that will get “borrowed” by family members, which says something about how useful it is day to day.

DeWalt Workbench Power Stand with Wireless Charger

This is the most inventive piece of the group: a weighted vertical stand with a large magnetic mount on top for your phone, plus a set of USB ports in the heavy base. The magnet holds the phone securely, and iPhone users with built-in MagSafe-style magnets can attach directly, while Samsung users will likely need a magnetic case, which can interfere with features like an S Pen.

The magnetic top charges slowly, in the range of about 5W to 15W, so it is more of a convenient dock than a fast charger. The base is where the real power lives: a 65W USB-C port that works independently, plus two more USB ports sharing a 65W max output between them. With a phone that accepts it, the stand delivered full fast-charging speeds during the early part of the charge cycle, tapering as the battery approached full, just like any proper charger.

The weight of the base is a genuine highlight. Once it is set on a bench, there is no risk of the phone dragging the whole thing over, and assembly is a simple matter of screwing on the post and tightening the magnetic head.

DeWalt 120W Car Charger

A compact in-car charger for the 12V accessory socket, offering one USB-C port rated at 20W and another rated at 100W. As with the wall charger, real-world results depend heavily on what the connected device is willing to accept.

With a depleted phone, the 100W port delivered around 58W, a genuinely fast rate, before dropping to the 28W to 30W range as the battery filled past 75%. The 20W port behaved as expected. The practical takeaway is that this works very well for topping up phones on the road, and it is also a sensible choice for feeding charge into a portable power station on the drive to a campsite.

For anyone who already uses the 12V socket regularly, this is a straightforward and effective upgrade over basic car chargers.

DeWalt Wearable Speaker Job Site Pro Max

The wearable speaker category fits job sites perfectly, and this upgraded Job Site Pro Max model is the most polished version yet. It clips to a belt, pocket, shirt, or tool bag, keeping music and calls close without blocking your ears the way earbuds or headphones would, which matters when a supervisor or safety officer needs to get your attention.

The controls handle everything you need hands-free: answering and hanging up calls, adjusting volume, and skipping or rewinding tracks. A Bluetooth indicator light on the bottom shows connection status, pairing is simple, and the side USB-C port charges via the included dual-ended cable. The body is water and dust resistant, and previous generations of this design have held up well to rough treatment over time.

The standout addition is a red task light on top, toggled with a dedicated button. In crawl spaces and tight spots, having a small light attached to your shirt turns out to be genuinely handy. Run time is rated up to 12 hours depending on use, and in a stress test the unit ran over 24 hours with just the light active. Volume is pleasant and clear rather than ear-splitting, which suits the wearable format.

DeWalt Tough Sound Pro Bluetooth Speaker

The Tough Sound Pro is a compact Bluetooth speaker with two very strong magnets built in, letting you plant it on a toolbox, refrigerator, or steel surface and leave it there. It also carries an audible power and pairing voice prompt, EQ presets that cycle through Vocal, Bass, Treble, and Dynamic modes, and a hearty included USB-C cable for charging.

The feature that makes this speaker more interesting than most is the ability to link multiple units together wirelessly. Pairing two of them took seconds, far easier than comparable competitor speakers, and once linked, one speaker controls playback and volume for both. Scatter a few around the shop and you get a simple multi-room style setup without any extra apps or accounts.

Sound quality is respectable, with a satisfying low end in Bass EQ, and the compact size plus magnetic mounting makes it easy to position exactly where you are working.

DeWalt Workbench Protection Mat

The workbench protection mat rounds out the group with a simple but well-executed idea. It has built-in measuring guides, a non-slip textured surface, 3mm of impact absorption, and resistance to oil, chemicals, heat, and water. That combination covers nearly everything that goes wrong on a typical bench.

The details are what make it pleasant to use. Grooves along one edge hold pens, pencils, and small parts so they stop rolling off mid-task, and raised detents across the surface help keep hardware in place. It is a generous size for a standard bench and, like the rest of the line, carries trilingual packaging.

For DeWalt fans who like keeping a bench organized, this is an easy and satisfying addition.

Which Ones Are Worth Your Money

The chargers are the easiest recommendations. The Two-Port Pro wall charger is the pick for anyone who needs serious single-device laptop or phone charging from the wall, while the car charger suits road warriors and campers who want real fast charging from the 12V socket. Keep in mind that shared ports split output and that fast speeds only appear when your device and battery level allow them.

The workbench power stand is the most fun of the group and works best as a bench-side dock with bonus fast-charging ports below. Among the speakers, the wearable Job Site Pro Max suits anyone who works with their hands and wants audio and calls without blocking their ears, while the Tough Sound Pro is the better choice for shop-wide sound, especially if you plan to link two or more together. The protection mat is a low-cost organizational upgrade that makes an immediate difference on a cluttered bench.

Conclusion

DeWalt’s newer tech accessories follow the same philosophy as its tools: slightly overbuilt, thoughtfully detailed, and designed for people who actually spend time in a workshop. The wall charger and car charger deliver real measured speeds close to their ratings, the workbench stand and protection mat make a bench more pleasant to work at, and the two speakers show genuine improvement in both features and pairing simplicity. None of them lock you into the DeWalt battery platform, so they are easy to adopt regardless of what color your existing tools happen to be.