CM Custom Blades Honesuki #7 Review: Een Eerste Kip-Slachtersmes Dat Levert

Introductie

Een honesuki is een Japans kip-slachtersmes, en dat goed maken is lastiger dan het lijkt. Veel messen die tegenwoordig als honesuki worden verkocht, zijn in feite k-petties met een nieuw etiket. Daarom is het opmerkelijk dat Chris Meade, een Ierse mesmaker met zo’n 15 jaar ervaring die zich vooral richt op culinaire messen, zijn allereerste honesuki maakte en opstuurde voor een volledige praktijktest. Dit is de zevende honesuki die dit testproces passeert, en hij kreeg serieus werk te verduren: drie hele kippen geslacht in één sessie, inclusief villen, gewrichten scheiden, het kuiltje verwijderen, dij en vleugel ontbenen, haantje提取… no, tenderloin extraction, and cuts through softer cartilage.

The knife in question is the CM Custom Blades Honesuki #7, a 160mm blade in 26C3 high-carbon steel with a 4mm spine and a wa-style handle. Here is how it performed.

First Impressions and Build Quality

Right out of the packaging, the first thing that stands out is the weight. The knife feels substantial in hand, with a nicely contoured spine that does not taper much, staying thick all the way to the polished tip. Above the bevel there is a tasteful tsuchime textured hammer finish, and the overall fit and finish is clean.

The wa-style handle is a highlight. It is super smooth on the hands, shows beautiful grain, and includes a slightly fluted butt as a finishing touch. The knife also ships with thoughtful extras: a pamphlet with maintenance tips and a QR code on the packaging that links straight to the maker’s website, where his available knives, including contoured handles with a splash of color, are easy to browse.

Profile and Geometry

Honesuki blades demand rigid parameters around profile, hardness, toughness, and shape, so geometry was checked carefully against a traced outline of a favorite reference honesuki. The two shapes look quite similar overall, with the main difference in the k-tip: the angle of the tip and where it meets the spine.

The flat edge on this knife is one of the flattest honesuki edges received to date, which is genuinely fantastic. A flat profile means that during incisions you know exactly where the knife is going and where it will stop. The preference noted for future versions is a more acute k-tip angle that meets the spine a little further back, making the tip easier to see when working top-down. The tip works fine for precision work as-is; this is a refinement, not a flaw.

Testing It on Three Chickens

Three chickens were butchered with this knife, and the experience was largely excellent. The blade is super sharp and cuts through skin with ease, which matters enormously in poultry work. Since a honesuki spends most of its life doing aerial cutting rather than touching the board, geometry is everything, and this blade flexes to the task well.

Wishbone removal, breast removal, thigh deboning along the line of fat, wing separation at the cartilage, and tenderloin extraction all went smoothly. The heel held up when pressing through cartilage near the rib cage, and the knife handled cuts near softer bone without complaint, exactly what a honesuki with a thicker spine is built for.

One practical note: the handle felt a little long during precision cuts held top-to-bottom, with the butt pressing into the lower part of the wrist. Cutting left-to-right with the bird on the board, this was never an issue. It may be a technique-dependent quirk, but a slightly shorter handle would help.

Edge Retention and Durability

The edge was tested deliberately for resiliency, with the thick spine pressed through cartilage around the backbone and keelbone. After three whole chickens, the knife was still sharp, with no need for a touch-up. For a carbon steel blade doing repeated joint work, that is a strong result.

Fit, Finish, and Steel Choice

The 26C3 high-carbon steel, sometimes called spicy white, is an inspired choice here. Meat accentuates its patina beautifully, and after three birds the blade developed gorgeous character. The steep bevels, textured handle, and refined contouring all speak to a maker who has honed his craft over many years, even on a first attempt at this specific pattern.

Things to Consider Before Buying

The two critiques worth knowing about are both minor and fixable. First, the handle length may feel long during precision top-down cuts. Second, the balance point sits just past the pinch grip; during aerial cutting, a touch more weight in the handle would reduce hand strain. Neither stopped the knife from performing well across three full birds.

Buying Advice

For home cooks serious about poultry butchery, this is a genuinely capable honesuki with excellent sharpness, resilient geometry, and standout fit and finish. If you prefer a very tip-forward feel or do most of your precision work left-to-right on the board, those quibbles largely disappear. Between the blade quality, the distinctive patina-prone steel, and the contoured handle work, this is a strong pick from a small maker worth following.

Conclusion

For a first-ever honesuki, this is a home run. The profile is nearly there, the edge held sharp through three chickens, the handle grips securely with no slippage, and the 26C3 steel develops beautiful patina. With a slightly shorter handle and a more acute k-tip angle, this pattern would be about as close to classic honesuki geometry as it gets. Even as it stands, it is a beautiful, hard-working butchery knife.