Grow Lights
Viper Spectra KS 5000 Review: A New 4x4 Bar Light Contender
A foldable 500-watt six-bar LED grow light with Samsung LM301H diodes, strong 4x4 coverage, and well-designed dimming and daisy-chain control.
Introduction
Viper Spectra has built its lineup around compact board lights, mostly small rectangles sized for a 2x2 or 2x4 space. The KS 5000 changes that. It is the brand’s new 4x4 bar-style light, and it arrives at a moment when most lighting companies are moving toward this format. After spending time with it, this looks like a deliberate step to stay competitive, and in several respects it succeeds.
Viper Spectra currently offers four series. The XS series has already proven itself as a strong line of small lights, and the P series sits alongside it. The KS 5000 is the first of the brand’s lights aimed at filling a full 4x4 footprint with a bar design.
Design and Build: Foldable, Light, and Out of the Box Ready
The six light bars come pre-attached to the frame, so there is no assembly to do. It is essentially ready straight out of the box: two connectors emerging from the frame feed the strips, three bars per connector. The whole unit is clean, polished, and notably light, which means less stress on your tent poles than some heavier bar fixtures impose.

Eye hooks along the frame accept ratcheting rope hangers, which are included, along with a small carabiner assembly. The fixture folds for storage and shipping, and its low weight makes it easy to reposition when you need to.
The Driver: Big, Substantial, and Remote-Mount Friendly
The included driver is genuinely enormous, noticeably larger than the driver on a comparable 600-watt-class fixture. Unlike some oversized drivers that feel hollow, this one is a substantial, heavy unit, and it is rated for an actual power draw of 500 watts plus or minus 3.

On the driver you get the two power connectors for the light bars, a manual dimmer, ports for daisy-chain dimming between multiple drivers, and the AC input. Daisy chaining lets you control several lights from a single dimmer, and the six-pin jacks also support external PWM control, which opens up automation options.
There is no easy way to attach the driver to the light frame, so you have two options: hang it inside the tent with the included carabiner kit, or run it outside the tent entirely. Running a simple temperature comparison, a four-hour full-power test with the driver inside the tent stabilized at 25.7 to 25.9 degrees Celsius (78.3 to 78.8 Fahrenheit); moving the driver outside dropped that only to 25.5 to 25.7 degrees Celsius (77.9 to 78.3 Fahrenheit), a difference of about 0.2 degrees Celsius. Surprisingly modest, but the option to remote-mount is still a nice bit of flexibility.
Diodes and Spectrum: LM301H Over LM301B
Each of the six bars carries 204 Samsung white diodes, a mix of 3000K and 5000K, using the LM301H bin. These are produced specifically for horticulture and are rated at a photosynthetic photon efficacy of 3.1 micromoles per joule, compared with 2.92 micromoles per joule for the LM301B chips many competitors use. In plain terms, the H version produces more photons useful to plants for the same power input.
Six Osram nanometer red diodes per bar round out the spectrum, so the light works for both veg and flowering. The strip surfaces are coated to improve water resistance on the diodes.
Viper Spectra’s own sphere test results put the whole fixture at a system-level efficacy of 2.56 micromoles per joule, accounting for the diodes and the driver together.
Footage and Light Spread: Built for Corner-to-Corner Coverage
The KS 5000 measures roughly 39.5 by 39.5 inches, over 15 percent larger than the Mars Hydro FC 4800 at 32 by 33 inches and the Spider Farmer SC5000 at about 34 by 34 inches. That extra area helps push light into the corners and edges of a 4x4 space.
The bars are deliberately not mounted equidistantly. They are spread toward the frame edges with a larger gap in the middle to prevent center hot spots, and the diodes themselves are more concentrated at the ends of the bars for the same reason.
PPFD Testing: Real Numbers in a 4x4
Testing used an automated enclosure with an Apogee SQ-500 quantum sensor moving in two-inch increments, taking 529 measurements per hang height from 6 inches up to 36 inches. Power draw measured 500 watts at startup, settling to 493 watts once fully warmed up.

One consistent pattern: PPFD readings trend higher on the side where power enters the frame, because the diodes closest to the power source receive more power than those at the end of each strip.
At Viper Spectra’s recommended flowering height of 16 inches at full power, the highest reading was 886 and the lowest, in a corner, was 548. The space averaged 765, with 74.5 percent of the 4x4 measuring over 700 and 62 percent coverage uniformity. Lowering the light toward 6 inches pushed maximum readings past 1000, but uniformity suffered with a pronounced hot spot under the frame while the corners dropped off.
Hanging Heights and Grow-Stage Settings
Raising the light trades intensity for uniformity: at 24 inches, uniformity improves to about 78 percent, the corner minimum breaks 600, and the maximum reading comes down to 775.

Viper Spectra recommends 16 inches at full power for flowering, 30 inches at 50 percent power for seedlings, and 28 inches at 75 percent power for veg, all on an 18/6 light schedule.
In practice, 500 watts over a 4x4 hits a strong cost-to-performance balance. An average above 750 sits right in the sweet spot for growers not supplementing with CO2, and reaching 1000-plus PPFD with good uniformity would likely demand another 100 watts that most growers would end up dimming down anyway.
Things to Consider Before Buying
The driver’s size is the main practical consideration. It needs a home, either hung in the tent or placed outside it, and there is no frame-mount option. The power-feed side of the light also runs slightly brighter, which is worth knowing when orienting the fixture over a canopy.
Buying Advice
The documentation deserves mention: the manual covers assembly, suggests PPFD targets for different plants and growth stages, and includes PPFD charts, all clearly written and well organized. Viper Spectra has also been responsive and helpful as a company, which matters when buying a brand that sells primarily online.
If you are shopping for a new 4x4 light, the KS 5000 is a smart buy. The large foldable footprint, the more efficient LM301H diodes, and strong measured performance add up to a lot of value, and it is a genuine contender for the best new 4x4 light of the year.
Conclusion
The Viper Spectra KS 5000 combines a bigger-than-average 4x4 footprint, efficient Samsung horticulture diodes, a powerful 500-watt driver with dimming and daisy-chain support, and measured results that hold up under scrutiny. For growers outfitting a 4x4 space without overspending on excess wattage, it is an easy recommendation.
Product link
View more details for Viper Spectra KS 5000
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Viper Spectra KS 5000