Toro 60V Pole Saw Review: A Sturdy, Powerful Cutter for Storm-Damaged Trees

Introduction

Toro’s 60V pole saw is one of the more interesting tools in this category because it makes a deliberate trade-off: it is designed to be assembled and left assembled, and in exchange it offers something most pole saws cannot. A built-in hook lets you push and pull branches around in the tree, which is a genuine advantage when clearing storm-damaged or partially fallen limbs.

Assembly and Setup

Out of the box, the saw is held together with an internal electrical cable running from the trigger end up to the motor head. Getting the bar and chain in place is straightforward: line up the chain in the correct direction, seat the bar, and use the small chain tensioner screw to set tension before tightening the cover. Bar and chain oil is not included, so make sure you have some on hand before the first cut. The oil level window is easy to read, and the fill cap screws down and locks securely.

One thing worth knowing early: this is a tool that stays together. The wired connection means you are not going to disassemble it into multiple pieces for storage or pack it back into its original box. Plan on hanging it on the wall as-is.

Design and the Built-In Hook

The defining design decision is the hook just below the saw head. Combined with the 10-inch bar, it makes this saw noticeably more versatile in dense, damaged trees. You can reach in, hook a branch, and drag it out, or push debris out of the way, without reaching in by hand. Most pole saws that break down into three pieces simply cannot take that kind of pushing and pulling.

There is some flex in the shaft, which is inevitable in a saw built for this kind of use, but the connections did not move at all after assembly. Tighten everything down properly and it feels sturdy through repeated contact with branches.

Cutting Power

The brushless motor delivers excellent power for this class. Once running, the saw cut through everything tested without bogging down, and the test material was mostly black locust, which is a genuinely hard wood. It ranks among the most powerful pole saws tested, and that was with only a 2.5Ah battery.

The one quirk to learn: because the motor is brushless, it can start slowly or hesitate if the chain is already pressed against the tree when you pull the trigger. Start the saw in the clear, then bring it into the cut.

Chain Lubrication and Durability

Oil flow is generous, with a visibly well-lubricated chain after use. That matters because consistent oiling protects the bar and chain from premature wear. Around the motor you’ll find cooling vents and a rear fan that help keep the brushless motor cool, and the overall build feels like it can take the abuse of being bounced around in a tree.

Trigger, Safety, and Battery

The safety takes a little getting used to: you pull back the safety lever and then squeeze the trigger. With gloves it works fine, and once you get used to the motion it does not get in the way. There is also a strap point on the trigger end to help hold the saw up, though no strap is included.

This unit ships as a bare tool. It was tested with a 2.5Ah battery from other tools, and all Flex Force 60V batteries up to 6 or 7.5Ah will fit. The 2.5Ah battery keeps the saw easy to move around and gives it a nice, easy-to-find balance point.

Buying Advice

If you want a pole saw that can genuinely manhandle branches out of trees rather than just trim them, this is one of the strongest options available, and it earns its keep in storm cleanup and dead-tree work. The trade-off is portability: it stays assembled and will not shorten for storage. Prices vary considerably online, so it pays to shop around, but at typical pricing it represents fair value for the power on offer.

Conclusion

The Toro 60V pole saw stands out for its power, its sturdy one-piece feel, and its unusually useful hook for pushing and pulling branches. If your main job is clearing heavy, damaged limbs from trees, the minor storage compromise is easy to accept.