Standout Workshop and Yard Finds from the National Hardware Show

Introduction

Trade shows are where the unglamorous problems get solved, and this year’s National Hardware Show delivered a healthy batch of practical solutions rather than flashy reinventions. Four products stood out for actually fixing real workflow annoyances: a trimmer that mounts to your existing lawn mower, a metal modular storage system that bridges the gap between a job-site toolbox and a garage cabinet, a three-speed precision screwdriver for small electronics work, and a material support platform that works with virtually any miter saw, stand, or bench.

Each one targets a specific kind of buyer, so the right question is not “which is best” but “which problem is yours.”

TrimX: The Trimmer That Rides on Your Mower

The TrimX is claimed to be the first weed trimmer and edger that attaches to a push lawn mower. You remove two bolts from your mower, connect the TrimX to the wheels using the supplied hardware, and you are set. It uses a quick-connect system with a free-moving wire harness and runs on a 20V lithium battery, with the trigger mounted up on the handle.

Because it handles trimming and edging, the pitch is simple: mow, trim, and edge in one pass without running back to the garage to swap tools. The sliding shaft accommodates different rear wheel heights, and the company says it fits any wheelbase from 18 to 30 inches, on any push mower brand, whether EGO, Cub Cadet, Murray, Craftsman, or others.

SK Modular Storage Cabinet System

SK’s new cabinet system sits halfway between a professional-grade toolbox and a modular pack-out-style setup. The difference from earlier plastic systems is the build: the edge and top pieces are plastic, but the body and drawers are all metal, with locking across the stack and soft-gliding drawer action.

It is genuinely modular, with six different configurations in the smaller units, including two-drawer, three-drawer, and garage-door-style cabinets that all interlock. There is room for half-width boxes or bags alongside a full drawer below, so the system adapts to how you actually store gear rather than forcing one layout.

This is not a product for everyone, but if you have outgrown plastic modular boxes and want something that locks and rolls like a pro cabinet, it is a compelling middle ground.

Vessel 3-Speed Precision Screwdriver

Vessel has long been a favorite for Japanese-made, well-engineered hand tools, and the new three-speed precision screwdriver is a neat evolution of the category. Tap the driver and you cycle through one, two, or three speeds, with easy bit changes and the company’s standard bits carried over.

The lineup around it is sensible too: a reverse-capable standard driver, and a high-speed mode for low-torque jobs like installing drawer pulls or plastic screws. For anyone who repairs drones, phones, game controllers, or kids’ bikes, a speed-selectable precision driver covers a lot of ground.

Red House Tools EasyWiz Material Support

The EasyWiz is a modular, universal material support platform that connects to virtually any miter saw, regardless of year, make, model, or size. Height and front-to-back position micro-adjust, so you can get your material coplanar with the saw table quickly, then slide the workpiece straight on.

What sets it apart is flexibility. It works with any miter saw table or stand, and it is billed as the only system in the industry that also works without a stand, so you can set it on a bench or the ground. The fence is adjustable: raise it for crown-angle stops, slide it forward for a zero-clearance back fence, or remove it entirely and move the L bracket forward to support deeper material. It packs into a small carrying case and locks in tight when you set it up again.

Buying Advice

Match the tool to the actual bottleneck in your routine. If you dread the mow-then-trim-then-edge shuffle, the TrimX collapses three jobs into one pass and works with the mower you already own. If your garage storage has outgrown plastic boxes, the SK metal cabinet system offers a locking, configurable upgrade path. If you do fine repair work on electronics, the Vessel three-speed driver puts adjustable control in a small package. And if long boards sag every time you cut, the EasyWiz solves that on almost any saw and any surface.

Conclusion

None of these products are complicated, and that is the point. They each remove a specific frustration: repeated trips across the yard, flimsy storage, one-speed precision work, and unsupported workpieces. If one of those frustrations is yours, these four are worth a closer look.