Snowboards
Lib Tech Rasman Review: A Powerful All-Mountain Deck That Demands Your A-Game
Chris Rasman's pro model pairs a C2X camber profile with a stiffer flex for riders who want snap, stability, and raw carving power in variable snow.
Introduction
The Lib Tech Rasman is Chris Rasman’s pro model, and it is built around a clear idea: a stiffer, more aggressive all-mountain deck that rewards powerful, assertive riding. It uses Mervin’s C2X camber profile, which places a smaller rocker section between the feet with longer camber zones under each foot. The result is more play between the bindings while still giving you independent camber zones to pop from, plus a bit better powder float and easier turn entry. It is available in 157, 159, and 161 cm lengths.
First Impressions and Test Conditions
This board was ridden at Arapahoe Basin on a sunny bluebird day with moderate to high winds and warmer temperatures. That meant chopped, wind-blown ice near the top of the mountain and perfect hero snow on the groomers mid-mountain and lower. It was paired with Rome Black Label bindings and K2 Thraxis boots.

Right away, the Rasman reads as a stiffer all-mountain deck. It is not a plank, but the flex is noticeably firmer than a typical freeride-oriented twin. There are small sweet spots out by the tip and tail kick, plus a flex point in the middle where the C2X rocker joins the two camber sections. Torsional flex is minimal, and that stiffness pays off when you twist the board: you get more power out of every turn.
Stability in Variable Snow
Stability may be the Rasman’s strongest card. This is one of the more stable boards from Lib Tech, with chatter essentially killed off underfoot while still feeling lively. The only time anything registered was on super wind-blown, hammered ice, the kind of frozen death cookies nothing would dissipate, where you simply hear the zipper and feel it underfoot. In slushy, choppy, chundery snow it pushed through everything, and on groomers at speed it never felt anything at all.
Snap and Jump Performance
The Rasman has serious snap. It is easy to load that C2X profile, and when you roll back on the tail it disengages and launches you. Ollies, side hits, cat track gaps, rollers: this board wants to clear all of them, and it earns the nickname of the Evel Knievel board of pop.

On jumps, even the small features at the test resort, it snapped off the lip and sent higher and further than everything else that day. It inspires enough confidence that no feature size feels out of reach. Just know what you are signing up for before you buy.
Butters and Jibbing: Know Its Limits
Buttering this board takes speed and muscle. There are sweet spots in the nose and tail where you want to aim your presses, but even those do not have much give, so you are essentially leveraging your full weight into the tips. And when you do lock one in, the board fights back and wants to set itself down. Steeper terrain and fresher snow make it far more rewarding.
As for jibbing, this is simply not a jib board. Weak nose and tail presses are about the extent of it, and going sideways is more of a balancing act, teeter-tottering on top of features rather than cradling around them. Aim to be over the front or back foot, because sitting right between the feet means fighting the reverse camber in a stiff deck that will kick you one way or the other.
Carving Power and Edge Hold
This board has raw power when carving. It is swift and powerful from edge to edge, and the moment you transition toe to heel it locks in, grips, and wants to drive. Load the rear camber section by hammering into the center on your back foot and it will swoop through the carve and lay a trench.

Short, tight, quick carves, long hard drawn-out arcs, deep laid-over turns: it handles all of them. On edge you feel how damp the board is, letting it cut through chop without washing out or getting kicked around. It simply wants to keep carving.
Who This Board Is For
The Rasman is aimed at the powerful all-mountain freestyle rider. One thing you notice immediately is the girth: it is a thicker, heavier-feeling board, and that translates directly into how it rides. Powerful, snappy, lively, damp, and happy to crush chunder and chop, it is designed to ride smooth in variable conditions.

It is fair to call it a more aggressive version of what an aggressive freeride knife always wanted to be. It is a true pro model in the sense that it is designed for the rider and terrain Rasman actually rides, and it is not going to be for everyone. This is a lot of board. It will force you to be a better rider, demand more power, and require you to bring your A-game.
Buying Advice and Comparable Boards
If you ride hard, ride fast, and want a damp, powerful deck that punishes variable snow while sending every side hit in its path, the Rasman deserves a serious look. Comparable boards worth cross-shopping include the Capita Mega Merc and the Jones Ultra Mountain Twin. For bindings, recommended pairings are the Bent Metal Transfer, the Ride A-9, and the K2 Formula.
Conclusion
The Lib Tech Rasman is a stiff, damp, explosively snappy all-mountain deck built for aggressive freestyle freeriders. It crushes chop, carves with authority, and launches off anything, but it is demanding and unfriendly to butter and jib work. If that trade-off fits your riding, it will likely be one of the most rewarding boards you have ever strapped into.
Product link
View more details for Lib Tech Rasman
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Lib Tech Rasman