Alpine Skis

Head Super Shape e-Magnum Review: A Precise 72 mm Frontside Carver

A close look at the narrowest ski in Head's Super Shape line, covering its layered build, its Protector PR 11 binding, and who it suits best.

Narrow frontside carving skis with mounted bindings on a neutral grey studio backdrop

Introduction

The Head Super Shape e-Magnum is the narrowest ski in Head’s Super Shape family, with a 72 mm waist that makes it the quickest and most precise of the three. The e-Rally sits slightly wider, and the e-Titan is the widest of the group at 84 mm. If quick edge-to-edge transitions, energy, and precision are the priorities, this is the model in the line built around exactly that brief.

Skier carving a turn on a freshly groomed piste in early morning light

The narrow platform is matched to a layered construction rather than a simple wood core, and that combination is where much of the ski’s personality comes from. It is a frontside tool first, and it is happiest on firm, groomed snow where its edge grip and response can be used properly.

Who This Product Is For

This is an on-piste ski, and Head leans into that with the 72 mm waist. It rewards skiers who spend their days carving groomed runs and want a fast, accurate feel rather than a wide, floaty platform.

It is also a sensible pick for anyone curious about recreational race leagues. The ski delivers a lot of energy and precision without being a full-blown race build, which keeps it usable for everyday frontside skiing as well as timed runs.

If most of your skiing happens off groomed terrain, or you prefer a relaxed, low-effort ride, this is unlikely to be the right match. The design is pointed clearly at precision and speed on firmer surfaces.

Main Strengths

Precision out of the tip is the standout trait. The more the ski is leaned over, the more it wants to come across the hill, and that behaviour pulls you through the fall line with very little wasted input. Edge-to-edge transitions happen quickly, and the ski feels eager rather than lazy underfoot.

High-speed stability, torsional stiffness, and edge grip are all strong here, which is why it holds up when you push the pace on hard snow. There is a lot of energy packed into the build, and it shows up most clearly at the end of a turn, whether that turn is carved or skidded.

Low angle close-up of a ski edge biting into firm groomed snow

The tip shape plays a large part in that. It is a more rounded, slightly spoony design with no early taper, and it initiates turns cleanly while still digging in firmly once the ski is on edge. That makes the start of a turn predictable rather than grabby, so you can commit early and then sit in the arc and let the ski run across the hill.

Construction, Core, and Binding

Under the topsheet, Head combines a wood core with two sheets of metal, graphene, fiberglass, and carbon. The graphene and the metal work to filter out unwanted vibration, while the carbon adds energy and pop back into the ride. The result is a ski that stays composed on firm snow but still feels lively when you release a turn.

The e-Magnum comes with the Protector PR 11 binding, which adds a genuinely useful dimension. Its lateral release is designed to help reduce knee injury risk, and the moving heel gives the setup a slightly more damped feel by filtering out unwanted movement. It is a thoughtful pairing for a ski with this much edge grip.

Weight is another useful reference point. In a 170 cm length with the binding mounted, the ski comes in at 3,263 g, which is about where you would expect a 72 mm frontside carver with an integrated binding to land.

On-Snow Character and Turn Feel

Flex is on the stiff side, though not extreme. There are stiffer frontside carving skis out there, and that is a good thing here, because this ski can actually be bent and manipulated. You are not locked into a single turn radius, and changing turn shapes feels natural rather than forced.

Rocker is minimal. There is a small amount at the tip, and a little more when the ski is decambered, which helps turn initiation feel clean and consistent instead of unpredictable. From there, the profile is mostly positive camber, and you feel that spring at the end of the turn as the ski rockets you into the next one. It is a rewarding feel, not an aggressive one, and it will not throw you when you are not expecting it.

Side profile of a carving ski showing rounded tip and full camber on packed snow

There is no tail rocker at all. The tail is squared off, which gives a clean finish to the turn and maintains support and grip through the whole arc. Combined with the tip shape, that geometry is what makes the ski feel so planted when you are driving it hard across the fall line.

On the firm snow of test day, the ski was described as predictable, solid, and planted. It was noted as a ski that rips easy carves and moves from edge to edge quite quickly, without being surprising or shocking, particularly for anyone who has spent time on other Super Shape models. The metal and stiff core keep the focus firmly on on-piste performance.

Things to Consider Before Buying

The 72 mm waist is the defining spec here, and it cuts both ways. It delivers the quick, precise feel, but it also means the ski is not built for soft snow or off-piste days. Buy it for the terrain it is designed for.

The stiff flex also deserves honest consideration. It can be bent, but it still asks for a reasonably strong, confident skier to get the most out of it. Lighter or newer skiers may find a softer frontside ski easier to manage.

Because rocker is so limited and the tail is fully cambered, the ski is less forgiving in variable or chopped-up snow than a more rockered design. That is a fair trade for the edge grip and turn finish, as long as you know which side of that trade you want.

Buying Advice

Choose the e-Magnum if your skiing is mostly on groomed runs and you want a fast, precise, energetic carver that is not a full race build. The narrow waist, stiff-but-manageable flex, and strong edge grip line up well with that goal, and the Protector PR 11 binding adds both a safety-oriented release design and a damped feel.

Carving skis, boots and poles leaning against a wooden ski lodge wall at golden hour

If you split your time between groomed runs and softer snow, the wider Super Shape options make more sense. The e-Rally is the middle step, and the e-Titan at 84 mm is the most versatile of the three. The e-Magnum is the specialist, and it is worth choosing on that basis rather than trying to make it cover everything.

Length choice matters too. The 170 cm version weighs 3,263 g with the binding, and it behaves like a quick, responsive carver at that size. Match the length to your height, weight, and how aggressively you like to ski rather than simply picking the longest option available.

Conclusion

The Head Super Shape e-Magnum is a focused frontside carving ski that does exactly what its 72 mm waist suggests. It initiates turns cleanly, holds an edge with real grip, and releases with enough energy to make each turn feel connected to the next. The layered build of wood, metal, graphene, fiberglass, and carbon keeps it composed at speed without making it rigid or one-dimensional, and the Protector PR 11 binding is a welcome addition rather than an afterthought.

For skiers who spend their time on groomed terrain and want precision and quickness without a full race platform, this is a strong, well-resolved choice.

Product link

View more details for Head Super Shape e-Magnum

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Head Super Shape e-Magnum

Further reading

Related Reviews

Narrow alpine carving skis standing upright on a matte concrete floor in soft studio light

Alpine Skis

Atomic Redster X9 Review: An Ultra-Precise Carving Ski for Firm Snow

A close look at the Atomic Redster X9, a 65.5 mm carving ski built for firm groomed snow, covering its construction, strengths, limits, and who should buy it.

10/14/2026
Pair of narrow dark alpine carving skis laid on a matte concrete surface

Alpine Skis

Atomic Redster X9 S Review: A Precision Carving Ski for Firm Snow

The Atomic Redster X9 S pairs a 65.5 mm waist with race-derived construction and steel damping, delivering knife-like precision on firm groomers.

10/14/2026
Two alpine carving skis with bindings leaning against a concrete wall in studio light

Alpine Skis

Blizzard Thunderbird R15 WB Review: A 76 mm Frontside Carver Compared With the Firebird HRC

A practical look at the Blizzard Thunderbird R15 WB, its TrueBlend core and Active Carbon Armor, and how it differs from the race-oriented Firebird HRC.

10/14/2026