Snowboard Bindings

Drake 50 Snowboard Binding Review: Sloppy and Unresponsive

A soft, loose-binding ride with ratchet issues and questionable strap fit. Here is what to know before you consider the Drake 50.

Drake 50 snowboard binding shown at a three-quarter angle on concrete

Introduction

Some gear earns a place on the mountain, and some gear leaves you wanting more from the first strap-in. After riding the Drake 50 binding on a sunny bluebird day over perfect corduroy, some chop and chunder, leftover snow and warmer temperatures, the honest verdict is that it falls firmly into the second category. This review breaks down where it falls short and who might still have a reason to pick it up.

How It Rides on the Mountain

Two words define the on-snow experience of this binding: sloppy and unresponsive. The overall flex is soft to the point of feeling loose, with a lot of lateral play and noticeable give through the straps. Power transfer is limited, and every bump underfoot gets transmitted straight through, which makes for a fatiguing ride over a full day.

Snowboarder riding fresh corduroy groomer terrain on a sunny day

If your riding is purely about jibbing and mellow park laps, that softness might actually work in your favor. But if you want anything resembling response and control, the Drake 50 simply does not deliver it.

Adjustability

There is a decent amount of adjustment on paper. Flip tabs on the toe and heel let you loosen and lengthen or shorten the straps, the toe ramp has three mounting holes to slide it forward or back, and the heel cup can be adjusted with a screw. Forward lean adjustment is included, plus three placements for rotating the highback.

The catch is that most of this is set-it-and-forget-it hardware. You cannot adjust anything on the fly, and the toe ramp push tabs pop down but need to be pulled back up manually. The forward lean adjustment is easy to use but sticks while sliding up and down. All of it works, but none of it feels refined.

Straps and Ratchets

The straps are a weak point. The toe strap is bulky with an odd cutout that does not seem to fit most boot shapes, and getting it to sit like a proper toe cap requires fiddling with the pin system and lengthening the strap. The heel strap has a lot of give and just sits on the instep without really cradling the boot.

Close-up of a snowboard binding strap and ratchet mechanism

The ratchets are worse. They are not uniform across the two straps, so only one has a one-finger quick release while the other has to be grabbed from the front. During testing, the ratchets prematurely released, slipped, and stuck, the full trifecta of failures you never want from a binding. That combination does not inspire trust.

Highback and Flex

The highback is soft with a huge amount of give. It does have a large cutout that cradles the back spine of the boot nicely, but when you drive into it, there is simply not much rebound or rigidity in return. The forward lean adjustment works, but it sticks as you slide it.

Close-up of a soft-flexing snowboard binding highback against a boot

In fairness, this highback design feels like it was top of the line about two decades ago. Against modern bindings, it is a clear step behind.

Who the Drake 50 Is Actually For

This is the hardest part to answer. The heel cup is literally loose, the overall performance is sloppy, and the toe cap fits very few boot shapes. The three-hole compatible disc is a genuine plus if you ride a retro board, but with Burton no longer making three-hole boards, its usefulness is questionable, and it is the same disc design Drake used over two decades ago.

Loose snowboard binding heel cup being checked by hand

If you are browsing a rental shop and this is what is on the shelf, it will get you down the hill. Beyond that, comparable bindings like the Rome Vice, Union Ultra, and Bent Metal Joint are all stronger choices.

Conclusion

The Drake 50 is soft, loose, unresponsive, and unreliable in its ratchets, and it leaves you wanting more in nearly every category that matters. It ranks among the weakest bindings ridden in recent memory. Unless you specifically need a three-hole compatible binding for a retro setup, your money is better spent on the alternatives mentioned above.

Product link

View more details for Drake 50

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Drake 50

Further reading

Related Reviews

Pair of 2024 Union Ultra snowboard bindings on a concrete surface

Snowboard Bindings

2024 Union Ultra Snowboard Bindings Review: A Cushy, Freestyle-Focused Favorite

Two seasons on the 2024 Union Ultra: a lightweight, tweakable freestyle binding with standout comfort, a damp molecular bushing, and thoughtful hardware fixes.

10/15/2026
Matte black snowboard binding with open highback on a neutral surface

Snowboard Bindings

32 Team Phase Binding Review: A Fast Entry Binding Built for Freestyle Laps

The first binding from 32 uses the Phase chassis for quick step-in entry with a softer, freestyle-leaning flex. Here's how it performed on the snow.

10/15/2026
Arbor Cypress snowboard binding on a matte concrete surface

Snowboard Bindings

Arbor Cypress Snowboard Binding Review: A Laid-Back Cruiser That Can Charge

A closer look at the Arbor Cypress binding's adjustability, strap feel, and that oddly tall highback before you decide to buy.

10/15/2026