All-Mountain Skis
DPS Pagoda Piste 94 C2 Review: A Carbon All-Mountain Ski Built for Versatility
A detailed look at the DPS Pagoda Piste 94 C2, a 94 mm carbon all-mountain ski with C2 shaping, a three-wood core, and an 18 metre turn radius.
Introduction
The DPS Pagoda Piste 94 C2 is a 94 mm all-mountain ski built around the brand’s C2 shaping and a high-end wood and carbon construction. It sits in the width band many skiers treat as the most useful single-ski compromise: wide enough to handle soft snow, narrow enough to stay lively on groomed terrain.
Rather than chasing a pure frontside feel, it aims for on-trail capability in a wider-bodied format. That makes it relevant to skiers who want one pair of skis to cover most of the days they actually ski.
Who This Ski Is For
The Pagoda Piste 94 C2 is aimed at advanced and expert skiers. Its strongest appeal is for riders who prefer carbon construction over metal and value the precision and energy that a well-executed carbon laminate can bring to a ski.
It also suits anyone building a one-ski quiver. A mid-90s waist is one of the most versatile shapes available, and this model is designed to make the most of that width across groomers, mixed conditions and softer snow.

Skiers who spend nearly all their time carving on hardpack and want a dedicated frontside ski may find a narrower model more direct. This ski is at its best when the day is varied and the terrain keeps changing underfoot.
Construction and Materials
The build is one of the more involved in this category. The core combines three wood types: two central cords, one of aspen and one of paulownia, run on top of each other and are then sandwiched between two aspen sections. That layering is intended to deliver energy, stability and quickness at the same time.
On top of the core, DPS applies a dual carbon laminate above and below. The carbon stiffens the flex while helping keep overall weight down, which means the ski delivers performance without relying on metal.
Wood Core and Carbon Laminate
The result is a strong, relatively light platform. Carbon here is used as a high-quality structural material rather than a shortcut, and the ski feels energetic rather than pingy, which is a common complaint with less refined carbon builds. That difference in feel is a large part of why riders who like carbon skis tend to like this one.
Shape and Rocker Profile
Underfoot there is camber, which provides edge grip and rebound through the turn. Toward the shovel, the rocker starts earlier and produces fairly average splay, giving the ski a mainstream profile rather than an extreme one.
Taper is moderate. Nothing is exaggerated, and the shape is designed to let the ski follow its intended turn radius smoothly. The tail carries a little more shape, so edge control is not quite as continuous from tip to tail as on some other skis, but the overall package stays well rounded.
Camber, Rocker, and Taper
The moderate splay and generous rocker are not there only for easy turn entry and exit. They also give the ski a genuine soft snow component, so it floats better than a narrow carving ski would.

Riders who want a ski that performs on groomed runs without giving up soft snow capability will find this profile does both jobs reasonably well.
On-Snow Performance
With a 94 mm waist, the Pagoda Piste 94 C2 is meant to do a bit of everything. Turn radius lands around 18 metres, varying between roughly 17 and 19 metres depending on the length chosen.
On groomed terrain it holds up well. There is not much of a speed limit in the build, and it can be pushed hard, finishing turns with strong energy. Chatter and vibration stay low, so the ski feels secure and stable at speed and at high edge angles, which comes down to how the wood core and carbon laminate work together.
Things to Consider Before Buying
Edge control is strong but not absolute. The tail gives up a little compared with skis that maintain full tip-to-tail engagement, so skiers who demand maximum precision from a carving-focused ski should take note.
The carbon construction also has a distinct feel. It is energetic and light rather than damp and heavy, and riders who prefer the settled character of a metal-laminate ski may find the difference noticeable.

Finally, this is an all-mountain width, not a specialist. It will not match a dedicated frontside carver on hardpack or a much wider ski in deep snow, and it is not trying to.
C2 Shaping Versus the RP Profile
C2 shaping differs from the RP profile in how strictly it adheres to a target radius. Where the RP design is tied closely to a 15 metre radius, C2 gives the designers more freedom to adjust the rocker profile and taper shape, which results in a more pleasant experience on trail and in carved turns.
The trade-off is a slightly more aggressive straight-line cut compared with the RP, which is part of what makes the C2 version feel composed on groomed terrain.
Buying Advice
Length selection matters more than usual here because the turn radius shifts with it, from roughly 17 metres up to about 19 metres. Shorter lengths will feel quicker and more agile, while longer lengths will suit taller or heavier skiers and those who want more stability at speed.

If you want one ski that handles groomed runs, mixed conditions and softer snow without forcing an obvious compromise, the Pagoda Piste 94 C2 is a sensible candidate, particularly if you already know you enjoy carbon construction. Skiers who want a metal feel or a pure carving tool should look elsewhere.
Conclusion
The DPS Pagoda Piste 94 C2 is a well-rounded 94 mm all-mountain ski with a sophisticated wood and carbon build, an 18 metre turn radius, and shaping that keeps it comfortable on trail while retaining a real soft snow side. For advanced and expert skiers who want carbon precision and one-ski versatility, it makes a convincing case.
Product link
View more details for DPS Pagoda Piste 94 C2
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for DPS Pagoda Piste 94 C2