Snowboards
Dinosaurs Will Die Never Not Review: Traditional Camber with a Freestyle Edge
A stiffened-up traditional camber freeride-leaning board that stays playful where it counts. Tested through crust, chop, and corduroy at Copper Mountain.
Introduction
The Dinosaurs Will Die Never Not is a traditional camber snowboard aimed at the freestyle-focused freerider: someone who wants to charge hard but still play around when the mood strikes. This review covers how it handled a mixed-condition day at Copper Mountain, from crusty chop to icy corduroy, and who it makes sense for.
Riding Conditions and First Impressions
Testing took place at Copper Mountain on a day of mixed sun and clouds, with 4 inches of fresh snow sitting on top of genuinely crusted, choppy terrain, some chunky snow, perfect corduroy, and icy corduroy. The board was ridden with Rome Black Label bindings and K2 Thraxis boots.

Through all that choppy, crusty terrain the board was smooth. It cut through everything with ease, plowed through chop and chunder, and never left the rider feeling like they were about to get bucked around. Even when riding lazily and laid back, the board dissipated kinetic energy well. There was no foot fatigue, no chatter in the nose, and no flap at all.
Flex, Feel, and Camber Character
The Never Not runs good old-fashioned traditional camber from contact point to contact point, delivering the full load, pop, snap, and drive that profile is known for. It is available in 153, 157, and 161.
Compared to its earlier incarnation as the Brewster, the board is noticeably stiffer after the factory change. It is not quite a full-blown freeride board, but it is not middle of the road either. It sits in a middle ground where it is playful where it counts but leans precise. There is a small sweet spot in the nose and tail with consistent flex through the middle, and the torsional flex is easy to engage with some rebound to it.
Pop and Jump Performance
This board rewards effort. You have to load it up, roll back on the tail, and it springs: the more you put in, the more rebound you get and the higher you pop. Ride it laid back and it can feel soggy, though that is arguably user error. Even relaxed, there is still some spring, but the reactive nature means the board gets better the more energy you invest.

On jumps, the Never Not was fully at home and will send it. Whether going small, medium, or large, there is nothing to worry about: load it up to pop higher, or let the lip throw you and it still boosts.
Buttering and Jibbing
Buttering relies on those small nose and tail sweet spots, so you need to leverage your weight into them. The nose presses a little deeper than the tail thanks to the shaping, so nose butters come easier, while tail presses take a bit more effort.
On rails, this would not be a first choice as a jib stick. It handles 50/50s, nose presses, tail presses, and basic board slides and can get the job done, but it is a little stiffer than ideal. It does not cradle around a feature so much as balance-board on it, which experienced jibbers can manage. Riders who do not yet know how to jib should look at other Dinosaurs Will Die boards instead.
Carving and Edge Control
The board is fluid and smooth with quick edge-to-edge power transmission. When you need power, pushing the back knee into the center of the board and driving it down into the camber makes it slingshot out of the turn.

There is one clear limitation. When trying to lay a deep, hard Euro carve, it feels like hitting a limiter: the board locks in on edge but will not lay over any further. Short, tight quick carves and medium carves are the real strong suit. Deep, hard low-riding carves are simply not its territory, and it will not drag those kinds of edges.
Who This Board Is For
The Never Not is built for the freestyle-focused freerider: someone who wants to charge, get up to speed, and rail turns, but still have a board that plays around when needed. The added stiffness and camber from the new factory mean you can drive it harder and it has more pop for sure.
One useful detail worth knowing: there is a center line sidewall in the board in case you want to split it into a splitboard. If you know what you are doing, go for it; if not, find someone who does. Measure four times, cut once.
Comparable Boards and Binding Pairings
Comparable boards include the Ride Deep Fake, the Yes Pick Your Line (on ink), and the Rome Stale Fish. Recommended bindings to pair with it are the Rome Katana, Bent Metal Transfer, or Union Force.

Conclusion
The Dinosaurs Will Die Never Not is a traditional camber board that rewards riders who put energy into it. It is smooth and stable through chop, pops hard on jumps, and carves well in short and medium arcs, with the trade-offs of a stiffer flex that makes it less forgiving for lazy riding, weaker tail butters, rail work, and deep Euro carves. For the freestyle-focused freerider, it is a strong, precise pick.
Product link
View more details for Dinosaurs Will Die Never Not
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Dinosaurs Will Die Never Not