Snowboard Bindings
Bent Metal Anvil Binding Review: A Soft, Playful Unibody Binding for Jibbers
A very soft unibody snowboard binding with excellent adjustability, strong dampening, and flex that will not suit performance-focused riders.
Introduction
The Bent Metal Anvil arrived for testing on a sunny bluebird day at Copper Mountain, ridden on a Ride Shadowban snowboard with K2 Thraxis boots. Conditions covered just about everything a resort can throw at a binding: soft groomers at the top, slush at the bottom, chopped terrain, and a bit of ice in the shade. That mix gave a fair picture of how this unibody binding behaves across real mountain conditions.
The short version: this is a very soft, playful, and loose binding that sits firmly in the jib category. Despite the catalog describing it as middle of the road, on snow it is closer to a softer Action. If forgiveness and ankle freedom are what you want, that is good news. If you are chasing response at speed, read the full review before buying.

Adjustability: Tuning Every Part of the Fit
Where the Anvil earns its keep is adjustability. The toe and heel have twist tabs, so you pop them open, remove them, and lengthen or shorten the straps to suit your boot. The toe strap also sits on a push pin system: push it down, pull it back up, and slide it forward or backward for a more dialed fit.
The highback can rotate into three placements so it sits parallel to the heel edge. Forward lean is one of the easiest adjustments around; you simply twist the forward lean block to whatever setting you want. Finally, the drive plate, essentially the foot pad, is swappable with any of the other options Bent Metal offers, so you can trade it for something more rigid or more damp depending on preference.
Strap and Ratchet Details
The straps are very soft and molded, with a lot of play in them and no excess padding built in, since padding comes from the boot itself. The heel strap has a nice cutout for the instep and is a little wider on the outside toward the ratchets, which helps with lateral drive when you push into it. The toe strap has a minimal cutout and fits pointy-toed boots better than snub-nosed or blunt ones. Riders over the top of the toe strap will find it works for that too.
The ratchets have noticeable play; you can feel and hear the wiggle. The heel ratchet has a one-finger quick release that works well, but the toe ratchet does not, so you have to grab it from the front and give it an extra pull. It works fine either way, though the lack of uniformity between heel and toe is an odd choice.
Flex and Response: Very Soft, Very Loose
This is a very soft binding. The highback is soft with slightly more rigidity on the outside than the inside, and the most response comes right where the forward lean block is. Beyond that, the highback simply gets out of the way when you tweak or butter.

The straps add to that looseness. There is a lot of give, and pushing into them means pushing right through them, even though the binding has a surprisingly big disc. The result is a lot of lateral play. At speed in choppy terrain, the lack of strap response made controlling the board feel like a struggle. For jibbing, where you want forgiveness and ankle movement, that same looseness is a feature rather than a flaw.
Dampening: Better Than the Flex Suggests
With a binding this soft, you would expect to feel everything underfoot. There is some chatter, but the stock drive plate does a good job absorbing it. The Anvil stays lively without the harsh, jackhammer feeling, and if you want a different feel, the drive plate is swappable.
Who the Bent Metal Anvil Is For
This binding is for the jib kid, someone on a budget, or anyone who wants a soft, playful, and loose unibody binding. It will not disappoint you if forgiveness is the priority. If you want performance, precision, or a more responsive feel, comparable options to look at include the Union Ultra, the Salomon District, and the Arbor Hemlock.

Buying Advice
Buy the Anvil if you spend your days pressing, buttering, and jibbing, and you value adjustability and dampening in a soft package. Skip it if you ride fast, hit bigger lines, or want a binding that gives you crisp edge response. For those riders, the Union Ultra, Salomon District, or Arbor Hemlock are worth comparing first.
Conclusion
The Bent Metal Anvil is a genuinely soft, playful unibody binding with standout adjustability, easy forward lean tuning, a swappable drive plate, and better dampening than its flex suggests. It is not the most responsive option out there, and it is honest about what it is: a jib-friendly, forgiving binding for riders who like things loose. For that audience, it makes a lot of sense.
Product link
View more details for Bent Metal Anvil
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Bent Metal Anvil