Snowboard Bindings

Battalion Infinity Heel Strap Review: A Thicker Strap That Locks You In

A practical look at Battalion's proprietary Infinity heel strap, how its thicker construction changes flex and lock-in, and whether it is worth adding to your setup.

Thick matte black snowboard binding heel strap resting on a concrete surface

Introduction

The Battalion Infinity heel strap is a piece of proprietary hardware found on the brand’s snowboard bindings. It is not a radical rethinking of how a binding holds your boot, and it does not pretend to be. What it does is apply a specific idea about flex and lock-in, then execute that idea with a noticeably thicker strap than the alternatives it is measured against.

That thickness is the detail worth understanding before you buy. It changes how the strap feels underfoot, where the padding in your setup comes from, and how long the part is likely to hold up against cold, ice, and repeated loading. This review covers what the Infinity heel strap is, how it behaves, and who will actually get value out of it.

How the Infinity Heel Strap Works

The Infinity heel strap is proprietary to Battalion bindings. Its core behaviour is simple to describe: as you tighten it down, the strap gives you flex while strengthening itself, so it stays locked in rather than easing off under load. The tightening action is what engages the structure, which is why the strap feels progressively more secure the harder you crank it.

The clearest difference between the Infinity and comparable strap designs is thickness. This is a thicker strap. That extra material is doing real work, both in how the strap resists deformation and in how it holds up over a season.

Close-up of a snowboard binding heel strap being tightened over a boot

In practice, the effect is a heel hold that stays put once it is set. Riders who dislike re-tightening mid-run, or who notice their heel lifting when a strap softens up, will recognise the difference quickly. The strap is not trying to be clever. It is trying to stay where you put it.

Who This Product Is For

This strap makes the most sense for riders who already own Battalion bindings and want to refresh, replace, or upgrade the heel strap on their setup. It is also relevant if your priority is a firm, locked-in heel hold rather than a soft, heavily cushioned feel.

If you are the kind of rider who checks your straps at the top of every lift and prefers hardware that behaves the same way on the last run as it did on the first, the Infinity heel strap fits that profile well. If you are chasing the lightest possible setup or you specifically like a plush strap feel, the thicker construction works against those preferences rather than for them.

Main Strengths

The first strength is the way the strap reinforces itself as it tightens. Rather than relying purely on tension, the design uses the tightening action to strengthen the strap and keep it locked in. That translates into a secure heel hold that does not need constant attention.

The second strength is durability. Because the strap is thicker, it is stronger and more durable than a thinner equivalent, which means it is better placed to survive the elements just a little bit longer. Cold, wet, and abrasive conditions are hard on binding hardware, and extra material is one of the more honest ways to address that.

Snowboarder carving a groomed slope with bindings locked in

The third strength is feel on snow. The Infinity heel strap rides in a way that feels direct and planted, giving you a firm connection between boot and binding without the strap collapsing or rolling under pressure. For riders who value response over cushioning, that is exactly the trade they want.

Things to Consider Before Buying

The most important thing to understand is that this is not a necessary purchase. Battalion’s Infinity heel strap is beneficial rather than essential, and plenty of riders will be perfectly happy with whatever strap already came on their bindings. If your current heel strap is intact and doing its job, there is no urgency here.

The second consideration is padding. Because the strap is thicker, the padding in your setup largely comes from your boot rather than from the strap itself. Riders who are used to a heavily padded strap feel should expect a firmer, more direct interface, and should factor in what their boot already provides.

Finally, keep expectations realistic. This is an incremental improvement to an existing concept, not a new category of binding hardware. The value shows up in lock-in, strength, and longevity rather than in a dramatic change to how you ride.

Build Quality and Long-Term Durability

Thickness is the headline here, and it is worth treating as a genuine durability feature rather than a cosmetic one. A thicker strap is a stronger strap, and it holds up against the elements for longer than a thinner one. For a part that lives in snow, gets flexed thousands of times, and is exposed to grit and ice, that matters.

Snowboard bindings resting on a bench in a snowy alpine setting

The reinforcing behaviour also plays into longevity. Because the strap strengthens itself as it tightens, it is not relying on a single weak point to hold your heel down. The result is a component that feels solid at the start of the season and still feels solid later on, which is the quiet advantage of overbuilding a part like this.

Padding and Boot Compatibility

Because the Infinity heel strap is thicker, the padding you feel underfoot comes from your boot. That is a deliberate consequence of the design rather than a flaw, but it is the detail most likely to surprise a rider coming from a softer strap.

The practical takeaway is to think about your boot first. A boot with a well-padded heel will pair naturally with this strap and give you a balanced feel. A very firm, race-oriented boot will make the strap feel even more direct. Neither pairing is wrong. They simply suit different riding styles, and knowing which one you prefer is more useful than any single specification.

Buying Advice

The honest answer to whether you need the Battalion Infinity heel strap is no, not necessarily. It is not something you will be worse off without. But if you are already replacing a worn heel strap, or if you want a stronger strap that locks you in and is built to survive the elements a little longer, it is a sensible and beneficial upgrade.

Rider adjusting binding straps while standing on a snowy slope

The strongest case for it is a specific one: you ride hard enough to notice heel lift, you dislike straps that loosen over a run, and you would rather have a firm, planted connection than a soft, padded one. If that describes you, the Infinity heel strap delivers exactly what it promises. If it does not, your existing strap is probably fine, and that is a perfectly good outcome too.

Conclusion

The Battalion Infinity heel strap is a focused piece of hardware. It takes the flex-and-lock-in concept, applies it with a thicker and more durable construction, and comes out feeling stronger and more secure than a thinner equivalent. It is not a revolution, and it does not need to be.

Buy it if you want a firmer, longer-lasting heel strap and you are prepared for the padding to come from your boot. Skip it if your current setup already holds your heel the way you like. Either way, you now know exactly what this strap is and how it behaves, which is the whole point of understanding your gear.

Product link

View more details for Battalion Infinity Heel Strap

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Battalion Infinity Heel Strap

Further reading

Related Reviews

Pair of 2024 Union Ultra snowboard bindings on a concrete surface

Snowboard Bindings

2024 Union Ultra Snowboard Bindings Review: A Cushy, Freestyle-Focused Favorite

Two seasons on the 2024 Union Ultra: a lightweight, tweakable freestyle binding with standout comfort, a damp molecular bushing, and thoughtful hardware fixes.

10/15/2026
Matte black snowboard binding with open highback on a neutral surface

Snowboard Bindings

32 Team Phase Binding Review: A Fast Entry Binding Built for Freestyle Laps

The first binding from 32 uses the Phase chassis for quick step-in entry with a softer, freestyle-leaning flex. Here's how it performed on the snow.

10/15/2026
Arbor Cypress snowboard binding on a matte concrete surface

Snowboard Bindings

Arbor Cypress Snowboard Binding Review: A Laid-Back Cruiser That Can Charge

A closer look at the Arbor Cypress binding's adjustability, strap feel, and that oddly tall highback before you decide to buy.

10/15/2026