Snowboards
Arbor Verrado Review: The New All-Mountain Freestyle Rocker Board
The Arbor Verrado replaces the Koda Rocker with a full reverse camber, Grip Tech traction and a playful, easy-to-engage ride. Here is how it performs across the mountain.
Introduction
The Arbor Verrado is an all-new board that replaces the Koda Rocker and builds on the women’s Vaita. It runs Arbor’s System Rocker profile: full reverse camber from the center with Grip Tech underfoot to add traction when you are riding a groomer, so the board does not simply helicopter spin around beneath you. That full reverse camber makes it playful, easy to butter, and easy to ride in powder, and it does not require aggressive loading to engage. Sizes come in 157, 159, and 162 Wide, and it was tested at Copper Mountain with the Arbor Cypress binding pairing in mind, on a mixed blue-and-grey day with hot pow chunder and gusty winds.

Who This Board Is For
Overall, this board lands just above the middle of the road. It is not fully in the freeride spectrum; it sits more in the all-mountain freestyle category. It suits the do-everything reverse camber rider, someone who wants a board that is genuinely easy to engage and can be taken all over the mountain. It is also the natural next step for riders coming off the old Koda Rocker, since the Koda and Koda Carbon have become more aggressive and freeride oriented. Think of it as an intermediate “rad dad” board, and a direct spiritual successor to that first-generation Koda Rocker feel, just a little stiffer.
Flex, Chatter and Overall Feel
The flex pattern is slightly softer in the nose, stiffens through the midsection, and gets a touch stiffer in the tail. Torsional flex is highly abundant, so you can really ankle-steer it. With that softer nose, there is some chatter at speed, and the reverberation carries back underfoot so you feel it in the front foot. It is not enough to fully fatigue you unless you are straight-lining a fully icy run, and even then the board does a good job dampening so you do not have to worry about it.
The result is a board that remains lively but still rides smooth and consistent. One caveat: if you hit something while leaning back right in the dead center where the reverse camber lives, you can get bucked, so be aware of that. For a full reverse camber board, it is genuinely smooth.

Butters, Presses and Jibbing
Because the board is fully reversed, it is very easy to roll back on the tail to engage it, and that gives it a skate-like pop. You do not have to aggressively load anything: just roll back, pop, and as you bring your front foot up the board springs a bit. Want to butter? Roll back on the tail and you are in a wheelie; roll forward on the nose and you are in a nose press. In fresh snow or even leftover day-old hot pow, you can press into it and get a nice pow butter thanks to that reverse camber.
For jibbing, it does not suck. Engaging a press is simple: roll back for a tail press, roll forward for a nose press. One thing to watch: when you go sideways, the middle slips a little, pushing you either over your front foot or your back foot depending on weight distribution. It will not cradle and fully lock a press. It is not a first-choice jib board, but presses are easy, and you get a bit of snap out of anything you do. A small ankle flick off the tail gives you just enough to get off the end of a feature. You will not boost to the moon, but it works.

Pop and Jump Performance
You have enough snap to send a side hit or pop a roller without worrying about it. For small to medium-ish park features, this board really stands out. Anything bigger, and you will want something with camber, because it is simply easier to land. Would it be the first choice as a dedicated jump board? No, not by any means. Arbor makes better boards for that job. But if this is the only board you have, it can absolutely get the job done.
Carving and Edge Control
Grip Tech underfoot lets you ankle-steer this board hard, so quick, easy-to-engage movements that lock you in are its specialty. It has a fluid edge-to-edge power transmission. Not the most powerful, but there is power there if you need it. Because of the reverse camber, you can disengage the front foot, lock in under the back foot, drive your knee into the center, and rip out short, tight, quick carves as well as medium mellow carves. Cruising the blues and laying in a mellow trench from side to side is where this board stands out.
Can you Euro carve it? Yes, if you know what you are doing. If you do not, you are going to have a bad time. There is subtle nuance to carving it deeply and aggressively, and it works when you want it to, but you do lose some power out of the center if both feet stay locked in. The technique is to disengage the front foot, drive the knee into the center, and lay it over.

Buying Advice
For bindings, the Arbor Cypress, Rome DOD, and Union Force all pair well. If you are cross-shopping comparable boards, the Lib Tech Terrain Wrecker, Ride Shadowban, and Nitro Droplet Escape are the ones to look at. Given how well it preserves the old Koda Rocker feel, this board should sell very well with the Koda Rocker crew looking for something similar.
Conclusion
The Arbor Verrado is a genuinely good board from Arbor. It is forgiving, easy, and a mellow ride with skate-like pop, working Grip Tech traction, and enough torsional flex to play however you want. If you want a do-everything reverse camber board or you are replacing an aging Koda Rocker, this is an easy recommendation for what it sets out to be.
Product link
View more details for Arbor Verrado
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Arbor Verrado