Snowboards

Arbor Metal Machine Decon Review: A Soft, Playful Camber Twin for Park and Jib Riders

The Arbor Metal Machine Decon is a true twin park board with traditional camber and a soft, forgiving flex. Here is how it rides, where it shines, and where it runs out of strength.

Arbor Metal Machine Decon twin tip snowboard standing on a concrete surface

Introduction

The Arbor Metal Machine Decon is the softer sibling in the Metal Machine line, and the difference between it and the regular Metal Machine is noticeable. The Decon is part of Arbor’s deconstructed series, which means the brand deliberately made it more approachable with a softer flex. The result is a true twin park and jib board that is genuinely fun to ride, as long as you respect its limits.

We tested it at Copper Mountain on a demanding day: overcast skies, intermittent snowfall, firm and fast groomers, plenty of ice, and that grippy slushy snow that sits somewhere between mashed potatoes and granular. Paired with Rome Black Label bindings and K2 Thraxis boots, the Decon had to earn its keep in far from ideal conditions.

Who This Board Is For

Arbor built this board for someone starting out in the park who does not want a stiff board. It has traditional camber, so you get real pop and you learn how a board is supposed to ride, without the artificial help of cheater presses you get on full reverse camber or flat-to-rocker decks.

If that sounds like you, this is an easy recommendation: a fun cambered twin that lets you play around and find your feet in the park.

Snowboarder popping a side hit on a firm groomed run

The Camber Story

The Decon features Arbor’s parabolic camber. Do not let the name fool you: this is traditional camber. From contact point to contact point, you get that arc of classic camber that helps with load, pop, snap, and drive. Because the flex is soft, loading it up is very easy, and while the rebound is not the most reactive, it is predictable. You can pop off a roller or a side hit and know roughly what you are going to get.

Main Strengths

The standout feature is the sweet spot. The flexible zones in the nose and tail are huge, basically right outside the insert pack. You can bend and flex the board however you want and it will not fight you. That makes cruising around and playing with the tips genuinely entertaining.

The sidecut is dialed, which was a surprise given how soft the board is. It rolls quickly up on edge, toe side or heel side, and transitions fast. Edge hold is solid for what it is.

Close-up of a snowboard nose flexed against a snowy surface

Things to Consider Before Buying

There is a speed limit on this board. It will not push through chop and chunder; it is designed to either pop off ruts or butter over them. Edge hold struggles on chopped-out terrain too, so keep that in mind if your home mountain gets skied apart by mid-morning.

On jumps, smaller is better. Small to medium features are about the ceiling. On anything over roughly 25 feet, the core does not have the strength to handle the landing, and you will likely get whipped. This is exactly where the regular Metal Machine pulls ahead: that board is stiffer than people think, and it is the better pick for bigger features.

Snowboarder pressing on a rail in a terrain park

Jibbing and Presses

This is where the Decon is happiest. It locks into tail presses, and it cradles around features when you get sideways. It is soft and forgiving enough that if your weight is just slightly too far forward on a tail press or too far back on a nose press, it will slap down, so engage the press toward the contact points to keep it gripped.

Coming off a feature, you will not spring out; there is only a minuscule amount of rebound, and a small ankle flick gets it done. One warning: if you are coming in hot from the top of a feature, you are going to clap it out. Do not do that, or get the regular Metal Machine instead. If jibbing is your thing, do not hesitate.

Riding It Around the Rest of the Mountain

Getting around the mountain is fine. Medium, mellow carves are about the max. Try a deep, hard, aggressive turn and you will flatten out the camber and end up driving off the back foot to slingshot out, and if you push too hard, the tail kicks out. Once you accept that, carving is not a problem, and quick evasive turns around the park come easily.

Snowboarder carving a mellow turn on a fast groomer

Buying Advice

Choose between the two Metal Machines based on what you want:

  • Want something a little stiffer for bigger jumps and harder riding? Go with the regular Metal Machine.
  • Want it a little softer and more playful for jibbing and casual park laps? Go with the Decon.

Comparable boards to consider include the Ride Kink, the Salomon Kickback, and the Public General Public. If you are picking up the Decon, binding pairings worth a look are the Arbor Hemlock, the Union Ultra, and the 32 Team Phase.

Conclusion

The Arbor Metal Machine Decon is simply a good twin board with camber, and a fun one at that. It is clearly differentiated from the regular Metal Machine, softer and more playful, with clear limits that show up quickly but nothing wrong with that. If you are looking for a fun cambered twin jib board and you are not chasing the biggest features in the park, this one deserves a serious look.

Product link

View more details for Arbor Metal Machine Decon

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Arbor Metal Machine Decon

Further reading

Related Reviews

Twin-tip freestyle snowboard standing at a three-quarter angle on a concrete floor

Snowboards

32 Middle Earth Scott Stevens Pro Model Snowboard Review: A Park Board With a Reversed Flex

A medium traditional camber park board with carbon V reinforcement that is stiffer in the tips and more playful between the feet. Here is how it rides and who it suits.

10/15/2026
32 Snafu directional snowboard standing on a concrete floor

Snowboards

32 Snafu Review: A Directional All-Mountain Freestyle Board with Serious Pop

The 32 Snafu pairs a directional camber-rocker profile with a stiffening tail for powerful carves, big ollies, and a surprisingly damp ride.

10/15/2026
32 XXX Pat Fava Pro twin snowboard standing upright on a concrete surface

Snowboards

32 XXX Pat Fava Pro Snowboard Review: A Stiff Camber Beast for Hard-Charging Riders

A full-width traditional camber deck that rewards aggression with stability and edge power, but demands effort everywhere else.

10/15/2026