This Week's Tool Deals Worth Grabbing: Sanders, Saws, Impact Wrenches and Portable Power

Introduction

Every week there is a pile of tool sales, and most of them are noise. This week’s batch is different: a few prices have genuinely fallen off a cliff, several are the lowest we have tracked in the past 30 days, and a couple sit in that rare zone where a normally expensive tool suddenly makes sense for a regular DIYer. Here are the eight deals actually worth your attention, plus some honest notes about who each one is for and who should keep scrolling.

How We Picked These Deals

The filter was simple: either the price had to be a real drop from the usual hovering level, or the tool had to be the best value in its class at this price. Discounted mediocre tools did not make the list. Everything below is a product we would comfortably recommend at the stated price, with the trade-offs clearly laid out.

Top Sander Deal: WEN Oscillating Belt and Spindle Sander

These oscillating belt/spindle sanders are the classic workshop multi-tasker, and nearly every brand sells a version of the same machine. Under the hood they are largely interchangeable, using the same spindles and belts, and this WEN version normally sits just over $200, sometimes higher. At $169.28, the price is genuinely unusual, and it makes this a strong entry point for anyone doing curved work, edge sanding, or detailed shaping.

It is not a heavy-duty production machine, but for a home shop doing occasional finish work it covers a lot of ground in one footprint.

Small Saw, Big Value: WEN 9-Inch Benchtop Bandsaw

Budget benchtop bandsaws used to be genuinely bad, but build quality has improved enough that we now recommend them without hesitation. This 9-inch model with a 2.8 amp motor comes in at $164, which undercuts most of the competition and even beats out discounted larger-name-brand deals that were circulating the same week.

It is not a 14-inch resaw machine, and nobody should pretend otherwise. What it is: a usable, surprisingly capable saw for detail cutting, curves, and small stock. Plenty of hobbyists retire their scroll saw once they own one of these, and for fast, easy cuts in thin material it is hard to beat at this money.

Best Value Table Saw: Metabo HPT Table Saw

We check the price on this saw constantly, because at its throwback price of $450 it is arguably the best bang-for-the-buck table saw short of stepping up to a cabinet saw. The key point is size: this is a full job-site saw, not a teeny compact model. It comes built into a rolling stand with wheels, includes an outfeed table, and has a ratcheting extension similar to what you see on the big-name job-site saws.

The table is one of the biggest you can get in this class, and table size is the feature that matters most day to day. If you only use a table saw a few times a month, this is a smarter buy than a full-size cabinet-style saw that eats your entire shop.

Cordless Muscle: DeWalt FlexVolt 60V Circular Saw Kit

At $279 for the full kit at Ace, including the saw, a 9 amp hour battery, the charger, and the bag, this 7-1/4-inch brushless FlexVolt circular saw is an absolute beast. The FlexVolt system lets the tool draw more power from the battery pack when it is needed, which is a large part of why high-end cordless circular saws now hang with, and in some cuts outperform, corded equivalents.

If you are already in the DeWalt battery system, this is an easy call. If you are starting from zero, the kit packaging makes it a legitimate entry point too.

The Big Impact Wrench: DeWalt DCF900 Kit

The DCF900 is the big-boy impact wrench in DeWalt’s lineup, and this full kit with a 5 amp hour battery, charger, and bag sits at $200 through a regional chain that also ships to home. That matters because the best price we had tracked anywhere else was around $300. For context, the same store also had the compact DeWalt Atomic impact driver kit at $120, roughly a hundred below the best competing price we had seen.

We are not habitual DeWalt loyalists, which makes recommending this straightforward: at these numbers the value is simply hard to argue with.

Portable Power: EcoFlow Delta 2 Max

EcoFlow remains the benchmark in portable power, and the Delta 2 Max upgrades to the newer LiFePO4 battery chemistry with slightly improved solar input. The listed price of $2,400 drops to $1,899 with the promotional code, and the offer bundles two free solar panels. An additional code covers 5 percent off the Delta 2 Max and the generator bundle, including configurations the standard discount does not reach.

In testing, this unit handled nearly everything thrown at it; the only thing that tripped its protection circuit was running a microwave stacked on top of everything else. If you are willing to spend in this bracket, this is the premium option in the category.

Backup Power: Champion 2500W Dual Fuel Inverter Generator

This fully enclosed 2,500-watt inverter generator runs on gas or propane, can be paired with a second unit using a separately purchased connector, and delivers clean, quiet power at $414. It normally sits well above that, and there is also a single-fuel version only about $15 cheaper, so the dual fuel model is the one to get.

For the larger 4,500-watt Champion inverter at $696.46, the math flips: the single-fuel version drops all the way to $565, a huge saving over the dual fuel trim. If you do not need propane capability on the bigger unit, take the cheaper one and spend the difference elsewhere.

Outdoor Cooking Deal: Blackstone 36-Inch Griddle

The 36-inch Blackstone griddle with hard cover is at $297, and this is the version with the hard cover, which the Amazon listing near $500 does not include. The pricing gap between retailers on this one is genuinely odd, which suggests the sale has to end at some point, so if a big flat-top griddle has been on your list, this is the moment.

For casual backyard cooking, this is a lot of cooking surface for the money, and the included hard cover protects the steel surface between uses.

Quick Mentions Worth a Look

Not everything made the featured cut, but a few other prices stood out. The WEN 4x36 belt and 6-inch disc sander with cast iron base dropped to $96, which undercuts comparable models by a wide margin. The GearWrench 120-piece 1/4-inch drive set hit its familiar sale floor in the mid-$40s, a set that otherwise hovers near $90 to $100. The Knipex insulated long nose pliers with wire cutters came in at $31.59 against a usual $45 to $50 range, and the Estwing Sportsman’s 12-inch hatchet with its stacked leather grip remains a classic made-in-USA camp tool. On the budget side, the Hyper Tough 38-piece stubby wrench and socket set at $8.98 is a throw-it-in-the-truck essential, and the Irwin Quick-Grips four-pack (two 6-inch, two 12-inch) at $22.79 is cheap clamping capacity. The Skil 7-1/4-inch 13 amp corded circular saw at about $30 and the Bosch HD18-2 two-speed half-inch hammer drill at $94.95 are solid corded workhorses at low prices, the Black+Decker 20V cordless tiller fell to $62 from a usual $110-plus for light-duty garden soil, and the Hyper Tough 20V brushless blower and string trimmer combo at $100 is a reasonable starter yard kit. The Champion 4500W dual fuel inverter at $696.46, the Steamly 6-gallon wet/dry vac at $50, the Expert Grill 3-burner at about $110 with a cover, and the Reolink 4G LTE cellular security camera with solar panel at $210 round out the list for the right buyer.

Buying Advice

A few patterns are worth acting on. First, buy the kit versions of cordless tools when the kit price is this close to bare-tool pricing, because batteries and chargers are where the real cost hides. Second, dual fuel is worth a small premium (about $15 on the smaller Champion) but not a large one (about $130 on the bigger one). Third, lightning deals and regional store pricing move fast; if a price looks like a mistake, it usually is not, but it also will not last. Measure the deal against what the tool normally costs, not against the sticker, and you will rarely overpay.

Conclusion

This week’s standouts are the WEN sanders and bandsaw for workshop builds on a budget, the Metabo HPT table saw as the best value in its class, the DeWalt FlexVolt and DCF900 kits for serious cordless muscle, and the EcoFlow Delta 2 Max for anyone investing in portable power. Match the tool to the work you actually do, and any of these eight is money well spent at these prices.