Yard & Garden
Toro 60V Flex-Force Power Head System: One Battery, Five Yard Tools
A first look at the Toro 60V Flex-Force power head and its string trimmer, stick edger, hedge trimmer, pole saw, and cultivator attachments.
Introduction
Toro’s 60V Flex-Force system now includes a power head that accepts multiple attachments, turning one battery platform into a full lineup of yard tools. You can buy the power head on its own and add attachments separately, or pick up a kit that bundles the power head with the string trimmer and a 2.5 Ah battery.
This is a first look at the whole system: the power head itself, plus the string trimmer, stick edger, hedge trimmer, pole saw, and cultivator attachments. The overall impression is that Toro has taken fairly standard attachment categories and beefed several of them up, particularly the cultivator, and that most of these tools should suit the average homeowner well.
The Power Head: Battery, Grip, and Two-Speed Control
The power head runs a three-phase brushless motor and accepts any Toro 60V Flex-Force battery. The included 2.5 Ah pack slides in cleanly and sits above a small metal guard, so when you set the tool down on the ground you are resting it on the guard rather than on the battery. Larger packs, such as a 7.5 Ah battery, fit too, though a little more snugly around that guard.

Grip comfort gets real attention. The handle has rubber overmolding on the bottom and top, and the forward handle has rubber on its underside as well, so both hands get a secure hold. It is a two-speed unit, letting you switch between low and high to match the speed to whichever attachment is mounted. The trigger is variable speed with a soft start, and there is a two-step safety: pull back the safety lever, then squeeze the trigger.
How the Attachments Connect
All attachments use a square drive connection that feels close to a universal drive system. Mounting is genuinely simple: slide the attachment shaft in, align the button, tighten the collar, and it locks up very solidly. Removal is just as quick: loosen the collar, press the button, and slide the attachment back out.

Because every attachment shares the same coupling, swapping between jobs takes seconds, and that is the core appeal of a power head system in the first place.
String Trimmer Attachment: 14 or 16 Inch Swath
The string trimmer is rated for 0.095 line, which it ships with, and can be flipped to run either a 14 inch or a 16 inch swath. The head is a quick-feed design: turn it and you can tuck in new line easily. It is also a bump feed, so tapping it on the ground while working releases more line.

The head rotates counterclockwise, so anyone coming from a gas trimmer will feel right at home. Head speed is approximately 6,000 RPM, and combined with the soft-start trigger behavior it should feel familiar to most users.
Stick Edger Attachment: Cast Aluminum and an 8 Inch Blade
The stick edger carries an 8 inch blade housed in cast aluminum, and the blade itself is replaceable and fairly inexpensive. There is a small plug on the housing for adding grease to the gearbox, a nice touch for long-term maintenance.
The guide wheel adjusts up and down so you can set it to a comfortable working position, and a rubber flap at the back blocks debris from throwing back at you no matter where you set the wheel. On the high speed setting the blade moves quickly and should do a solid job along driveways and walks.
Pole Saw Attachment: 10 Inch Bar with Auto Oiler
The pole saw attachment uses a 10 inch bar with an automatic oiler, grease zerks for the gearbox, bucking spikes up front, and a limb puller at the back for grabbing and pulling limbs out of a tree. Adjustment underneath is easy to work with.
One thing to note: without an extension, cutting reach is limited to roughly 6 feet. The chain came set up only slightly tight, and the saw speed looks promising, which makes it an attachment worth watching for a full hands-on evaluation.
Heavy-Duty Cultivator: Built to Stay in the Ground
The cultivator is the standout surprise of the lineup, and when we say heavy duty, we mean it: this attachment is genuinely heavy. It uses carbon steel tines with a 10 inch working width and about 2.5 inches of depth. Everything is metal, and there is a removable cover on one side to check the oil level inside the gearbox.
That weight is a feature, not a flaw. On cultivators with straight blades, rough ground tends to make the head bounce around, only churning the surface. The heft of this unit helps keep the tines planted in the soil instead. The no-load speed on high looks excellent, though it will take real dirt time to confirm how it performs.

Overall Buying Advice
The power head alone makes sense if you already own Toro 60V batteries, while the kit with the string trimmer and 2.5 Ah battery is the natural entry point for new buyers. The string trimmer, edger, and hedge trimmer all read as solid homeowner-grade tools, and the cultivator stands out as unusually robust for an attachment in this class. If you want one battery to cover trimming, edging, pruning, and light soil work, this lineup covers the bases.
Conclusion
Toro’s Flex-Force power head system delivers a straightforward promise: one motor, one battery family, and a set of attachments that go beyond the usual bare minimum. The square drive coupling makes swaps painless, the two-speed control adds flexibility, and the heavy-duty cultivator in particular suggests Toro is aiming above the typical homeowner tier. Deeper hands-on testing of each attachment will tell the full story, but as a starting platform, this is a system worth shortlisting.



