Tekin MTR4 Tool Roll Review: A USA-Made Tool Roll That Checks All the Boxes

Introduction

The Tekin MTR4 sits in a completely different universe from the budget tool rolls most people start with. If a typical hardware-store tool roll is a $33 affair with 16 open pockets, this one is built to answer the question of what a tool roll looks like when nothing is left on the table. It is fully made in America with American-made parts, and every aspect of it feels top shelf.

That quality comes at a price. The MTR4 costs $170, with an extra $20 if you want the shoulder strap. So the real question is whether a tool roll can justify that. After spending time with it, here is how the numbers and the details stack up.

What the Tekin MTR4 Is

The MTR4 is one of at least three or four tool rolls Tekin makes, and this is the largest of the ones covered here. It measures about 16.5 inches wide by 28.6 inches long, and the sample here is in brilliant orange. The color is genuinely striking: a standard orange hardware-store pencil looks dark next to it. If you want a tool roll you can spot instantly in a cluttered garage or truck bed, this shade delivers.

Tekin offers several different colors, so orange is a preference rather than the only option. Construction starts with 1,000-denier material, V92 bonded polyester thread, and double stitching all the way around. It uses 1.5-inch buckles and has substantial handles with a piece of polypropylene rope inside the nylon webbing.

Pockets and Storage Layout

The organization here is generous. There are four individual zip pockets, each with a number 8 YKK zipper and paracord pulls. The pulls are not removable, which is a sensible choice: removable pulls tend to get torn off and lost, and hook-and-loop closures tend to collect grit that makes them frustrating in dusty or sandy conditions.

Each of the four zip pockets is full length at 15 inches long, so long tools simply disappear inside. A 21 mm wrench vanishes into a pocket. Knipex Cobras fit with room to spare. Even what Snap-On considers a long ratchet slides fully inside.

Beyond the zip pockets, there is one 4-by-3-inch pocket and three 3-by-3-inch pockets. Three square inches may not sound like much, but think of it as nine square inches per pocket that you can completely fill, then roll everything up and seal it. On one end there is also a large flat zip pouch that swallows plenty of extra storage.

There are also non-stretching tie-down points, with room for at least three extra-long tools that need a home inside the roll. A level will not fit through the small loops, but very long ratchets and similar tools can be secured. One honest note: if you were hoping for extra external attachment points to hook other things to, the MTR4 does not go much beyond what you get here.

Everyday Use and Carry Options

You get three different carry options: a hanging handle, a carrying handle, and an optional shoulder strap for the extra $20. The hanging handle is a small touch that matters more than it sounds, since being able to hang the roll open at a work site keeps every pocket visible and reachable.

The roll closes up tightly with the buckles, and once wrapped and sealed it carries like a compact bundle rather than a floppy pouch. In use, the combination of full-length pockets, tie-downs, and the flat end pouch means the MTR4 can hold a serious set of hand tools without anything rattling loose.

Is It Worth $170?

This is the honest dividing line. The MTR4 is priced on the high side for a tool roll, and the shoulder strap adds another $20. If $170 for a tool roll feels excessive, it probably is for your needs, and a cheaper roll will hold tools just fine.

But if you want the state of the art, this is it. Compared with other premium options the writer of this comparison also owns, such as Atlas 46 rolls, the Tekin still stands out as a dynamite-looking, feeling, and operating tool roll. It answers the attachment-point question better than budget rolls, and it checks all the boxes: materials, stitching, zippers, layout, and carry options.

Conclusion

The Tekin MTR4 is a top-shelf, USA-made tool roll with full-length YKK zip pockets, generous small-tool storage, extra tie-downs, and three carry options, wrapped in 1,000-denier material with double stitching throughout. At $170 plus $20 for the shoulder strap, it is unapologetically premium. If you want the best tool roll available and the price does not scare you off, this is a very good place to spend your money.