Snowboarding

Complete Snowboard Gear Lineup: Outerwear, Boards, Boots and Accessories Worth a Look

A season-ready snowboard gear list covering a full shell kit, trusted midlayers, custom hoodies, boots, bindings and two standout boards.

Snowboard gear flat-lay with outerwear, mitt, helmet, goggles and boot on concrete

Introduction

The season has arrived, so it is time for a full rundown of the gear lineup for the year ahead. This list covers everything from base layers to boards, with a mix of freshly purchased outerwear, long-trusted staples and a couple of new experiments. The idea is simple: every piece here earns its spot by solving a real problem on the mountain, whether that is heat management, waterproofing, comfort or pure performance. If you are refreshing your own setup this winter, this breakdown should give you a solid checklist to work from.

Outerwear: A Full Shell Kit for Every Kind of Day

This year features a full ThirtyTwo kit, purchased personally rather than supplied by the brand. The appeal is straightforward: strong style, quality construction and function at a price that seems genuinely fair for what you get. It starts with a quality base layer, and merino wool is the recommendation there because it insulates well even when sweaty, resists odor naturally, wicks moisture and simply feels soft against the skin. Evo merino base layers and Stance socks have worked well, but any quality merino set is worth the investment for heat management alone.

Snowboarder in a shell jacket and pants adjusting boot straps on a snowy slope

ThirtyTwo TM Pants

The TM Pants are the daily driver on nice days, worn with hoodies, in the tan and black colorway. They carry 20K waterproofing and 20K breathability with four-way stretch at $210, which is a striking spec sheet for the price. They are comfortable and well thought out, with zippered vents inside the legs, zippered cargo, side and back pockets, and an adjustable pant loop by the boot so you can cinch everything down. Everything you would expect from a quality snow pant is here.

ThirtyTwo TM3 Jacket

The TM3 Jacket pairs with the bibs for powder days and backcountry use. It is built from a three-layer fabric rated at 25K waterproofing and 25K breathability with four-way stretch, performance comparable to a Gore-Tex product at a fraction of the price. Features include zippers on all pockets, two stretchy mesh goggle pockets inside, a zipper pocket with a media hole, a sleeve pass pocket, zippered mesh pit vents and taped seams. Like the rest of the kit, it is a pure shell with no insulation.

ThirtyTwo TM3 Bibs

The TM3 Bibs were the biggest surprise of the kit. The same technical three-layer fabric at 25K with four-way stretch is genuinely impressive at this price point, and the bibs came in at $310. They include internal leg venting, adjustable fit down by the boot, zippered pockets throughout and four chest pockets for organizing a beacon, snacks and other gear. A fully open side zip provides cross-flow ventilation for touring, which makes these a serious option for anyone heading into the backcountry.

Gloves and Midlayer

Evo Felson Mitt

For gloves this year the pick is the Evo Felson Mitt, a new switch at around $50. It promises solid waterproofing and a warmth rating similar to the Oyuki mitts used in previous seasons, with leather on the palm and around the fingers plus a waterproof synthetic material across the top of the hand. The standout feature is the goggle wipe on the thumb, something the Oyuki pair was missing. A full verdict comes after the season, but it looks like a solid and fairly priced mitten.

Arc’teryx Atom LT

A quality midlayer is one of the most worthwhile investments in a snowboard kit, and the Arc’teryx Atom LT is now in its sixth season of use. It is endlessly versatile: a layering piece in the backcountry under a jacket or hoodie, and just as useful around town. It is packable, uses synthetic insulation, has a DWR coating for light waterproofing, and the vented side panels use a different material that lets heat escape during dynamic activity like hiking or touring. That heat management is what makes it so hard to replace.

Midlayer jacket with vented side panels laid on a wooden lodge bench

Hoodies

Board Archive Riding Hoodie

Year three of the fully custom Board Archive riding hoodie, designed from the ground up from fabric to cut to fit to features. The kangaroo pocket has zippers to keep your stuff secure, with a media hole to run headphones up through the inside. Zippered pit vents with mesh handle ventilation, YKK zippers are used throughout for durability, and the zipper pulls were upgraded this year. A polyester liner inside adds windproofing and comfort, and the sleeves have a naturally plush interior. This is a heavyweight, very warm hoodie, comfortable down to about 20 degrees with a midlayer underneath, sometimes colder, and the fabric is lightly water resistant. Everything about it is designed for snowboarding.

Board Archive 10K Waterproof Hoodie

New this year is a 10K waterproof hoodie, a different take on the formula. It has a longer cut but is not quite as baggy as the riding hoodie, and because the fabric does not stretch the fit runs a little different while still leaving plenty of room to layer underneath. It includes a pass pocket and delivers 10K waterproofing, making it a good middle ground between a casual hoodie and a technical shell. A new white colorway joins the lineup this season as well.

Face and Head Protection

Airhole Waffle Grid Balaclava

For face masks it is Airhole again after a good experience last year. Tucking the balaclava up into the goggles produced no fogging issues, and the Waffle Grid Balaclava hits the sweet spot of function and fit in the current lineup. It is a small piece of gear that quietly solves two classic problems on the mountain: cold face and fogged lenses.

Sandbox Classic 2.0

The helmet of choice remains the Sandbox Classic 2.0, a model worn for over ten years now. This season there is a signature version with a custom graphic: a black and gray variation of The Great Wave off Kanagawa as a tribute to snowboarding in Japan. Beyond the graphic, it keeps all the features and the classic style you would expect from the Classic 2.0. It is made in very limited quantity, so it may take some hunting to find.

Dang Shades Magtech Goggles

Goggles are a change this year after running Anon in recent seasons. Anon remains top of the field for lens quality, but it comes at a high price point, so this year is a chance to try something friendlier on the wallet: the Dang Shades Magtech. Dang Shades is a smaller brand out of Salt Lake, Utah, run by Chris Beeford, a longtime figure in the sport who has been making goggles for about seven years and sunglasses even longer. The Magtech uses a magnetic lens for quick convenience, every pair comes with a bonus lens, and first impressions of the quality are positive. Early days yet, but so far, so good.

Boots and Bindings

Ride Fuse Boots

The Ride Fuse is now on its fifth consecutive pair, which says a lot on its own. They sit slightly on the stiffer side of medium, delivering the response and support a rider looking for a sharper feel wants. Favorite details include the full-wrap Intuition liner that molds to your feet over time, a full rubberized toe cap that keeps water out of the most snow-exposed part of the boot, and a Michelin outsole for grip on hikes. The Tongue Tied system uses a side Boa to pull the tongue toward your shin for extra response and a customizable fit, with a urethane tongue and spine adding rebound as you lean into the boot. Being a standard lace boot means full control over the fit. Boots are deeply personal, so try a few pairs, but this one keeps earning its spot.

Union Force Bindings

Still running Union bindings this year, but with a change of model. The Atlas was the first real favorite on the lineup, an all-mountain workhorse, followed by a couple of years on the Ultra, an extremely comfortable and damp freestyle binding with a mini disc. This year Union completely redesigned the Force, its versatile middle-of-the-road all-mountain binding, and after a couple of days on it, it looks like the pick for the season. It is more comfortable than expected, with generous padding across the top of the entire footbed plus additional dampening tech in the chassis. A full-size base plate gives a more planted feel similar to the Atlas while keeping much of the Ultra’s comfort.

Snowboard boot and binding close-up on a snowy deck with soft afternoon light

Snowboards: A Directional Pick and a Twin Pick

Two boards cover the season: one directional, one twin. This is where the hard goods get exciting, because both picks impressed during testing and fill clearly different roles.

Two snowboards standing upright in fresh snow beside a mountain lift line

Capita Meade

The directional pick is the Capita Meade, a board that was hugely impressive during last year’s testing. It is an expensive snowboard, but the construction is about as premium as it gets: a full carbon layup that makes it very light yet surprisingly powerful, extremely damp, with a smooth ride and plenty of energy. As an all-mountain freeride choice it is a genuinely fun board, and the plan is to bring it out on powder days throughout the season. That combination of low weight, power, damping and energy is what makes it stand out.

Endeavor BOD Legacy

The twin board, likely the most-ridden outside of reviews, is the Endeavor BOD Legacy, short for Board of Directors Legacy. The Legacy series uses a pre-tensioned fiberglass top sheet that acts as a structural layer, adding even more energy to the ride. It is a freestyle all-mountain board: a true twin with a good amount of full positive camber, plus 3D shaping with uplift at the contact points and beveled base and edges that make it much more catch-free riding flat base and more comfortable for butters. A lot of carbon built in makes it energetic with solid stability. For a rider who spends most non-testing days in the park, this one looks like a season-long favorite in the making.

Buying Advice

A few patterns are worth pulling out of this list. First, invest in the layers that touch your skin: a quality merino base layer and a versatile insulated midlayer will do more for your comfort day to day than almost any single upgrade. Second, shell outerwear with strong waterproofing and breathability ratings does not have to cost a fortune anymore, as the ThirtyTwo kit shows. Third, buy boots for fit and response above all, and try several pairs because fit is personal. Finally, match your board to how you actually ride: a damp, light directional board for freeride and powder days, a cambered true twin for park laps and flat-base tricks. Choose pieces that fit your terrain and your budget, and your whole setup works better together.

Conclusion

This lineup balances proven staples with fresh picks: a full ThirtyTwo shell kit that punches well above its price, a sixth-season Atom LT, custom hoodies built for riding, a fifth pair of Ride Fuse boots, the redesigned Union Force, and two boards that cover freeride and freestyle from opposite ends. Every item here was chosen because it solves a specific problem well, and that is the best lens for building your own kit. Check specs, try things on where it matters most, and enjoy the season ahead.

Further reading

Related Reviews

Snowboard gear flat-lay with board, boots, bindings and goggles on concrete

Snowboarding

2025 Snowboard Gear List: Five Picks That Earned Their Place on the Mountain

From Zeiss-lens goggles to a hybrid step-in binding, here are five pieces of 2025 snowboard gear that held up across a full season of riding.

10/15/2026
Flat-lay of snowboard gear including board, bindings, boots and purple jacket

Snowboarding

2026 Snowboard Gear List: Boards, Bindings, Boots and Outerwear Worth a Look

A season-ready snowboard setup built from the bottom up: base layers, Strafe outerwear, Ride and Union boots, Union bindings, and two new Capita boards.

10/15/2026
32 Cold World snowboard standing upright on a grey studio backdrop

Snowboarding

32 Cold World Review: A Playful Hybrid Camber Board for Park Laps

The 32 Cold World blends classic camber underfoot with flat nose and tail sections for a predictable, butter-friendly ride aimed at intermediate park riders.

10/15/2026