Sharp Pog Review: Bring Your Oscillating Blades Back to Life

Introduction

If you use an oscillating multi-tool regularly, you already know the pain of blade costs. Quality blades from brands like Diablo and Bosch are not cheap, and carbide versions can run 20 to 25 dollars each. Once a blade dulls, most people toss it in the garbage or let it languish in a drawer. The Sharp Pog is a sharpening tool built to change that, promising to restore worn oscillating blades so you can keep cutting instead of buying replacements.

Who This Product Is For

The Sharp Pog makes the most sense for carpenters, remodelers, and serious DIYers who burn through oscillating blades on a regular basis. If you only pull the multi-tool out once or twice a year, a sharpening tool is probably overkill. But if blades are a recurring line item in your tool budget, getting more life out of each one adds up quickly.

Main Strengths

It Actually Works

Two professional carpenters with extensive woodworking and remodeling experience tested the Sharp Pog after initially writing it off as a gimmick. Both walked away convinced enough to buy one. The surprise was not just that it sharpened blades, but how well it did so, leaving plenty of material on the blade so it can be sharpened again and again over its remaining life.

It Works Fast

Sharpening a blade took roughly a minute. That speed matters in real-world work, where the difference between swapping in a fresh blade and sharpening the one you have is whether the sharpening step actually happens. Instead of pulling the blade off and reaching for a new one, you can keep the Sharp Pog nearby and touch up the edge on the spot.

Things to Consider Before Buying

Carbide Blades Are a Different Story

Blade material matters. Carbide oscillating blades exist precisely because they cut through unknown material, including nails, where standard wood blades lose their teeth almost instantly. The Sharp Pog is aimed at extending blade life in general, and it remains to be seen how different blade types respond to sharpening or how well they hold an edge afterward.

You Need Enough Blade Material Left

The sharpening benefit depends on the blade having enough material remaining to work with. A blade that is completely worn down offers less to sharpen than one that is merely dulled. If you are in the habit of discarding blades as soon as performance drops, you will get the most value from sharpening them earlier in their life.

Buying Advice

At roughly 40 to 45 dollars, the Sharp Pog costs about the same as two carbide blades. If it pays for itself by reviving even a handful of blades that would otherwise have been thrown away, the math works in its favor, especially for anyone going through blades weekly. Both testers planned to run their about-to-be-discarded blades through it to see how much extra life they could extract, and to report back on how different blade types sharpen and hold their edge.

Conclusion

The Sharp Pog turned skeptics into buyers, and that is perhaps the strongest endorsement a tool accessory can get. It sharpens oscillating blades quickly, leaves material for repeated sharpening, and targets one of the most annoying recurring costs of multi-tool ownership. If oscillating blades are a regular expense in your work, this is a low-risk way to stretch every blade further.