Remind Solution Liner Review: A Heat-Moldable Aftermarket Liner That Revives Your Snowboard Boots

Introduction

Most snowboard boots are built around an assumption: that the average rider gets 10 to 15 days on the snow per year. Stock liners and insoles are designed with that kind of usage in mind, which is why they pack out quickly and leave heavier users with sloppy, unsupported boots.

The Remind Solution Liner is an aftermarket liner built specifically to break that cycle. Remind Insoles, a brand with over a decade of experience making snowboard- and skateboard-specific footbeds, designed this liner for riders who put serious volume on their gear. It is heat moldable, comes bundled with a Remind insole, and is intended to breathe new life into boot shells you would otherwise retire.

This review covers what the Solution Liner is, who it suits, and what to check before you buy.

Who This Product Is For

The clearest use case is the high-volume rider. If you burn through stock liners in a season or two while your shells still have plenty of life left, replacing just the liner is a smarter move than buying a whole new boot. Adding a fresh liner gives boots a new feel and can extend their usable life by two, three, four or more seasons.

It is also aimed at riders who want more support than a stock liner provides. Remind describes it as a product created to handle the beatings of aggressive snowboarding while delivering support and alignment that average liners simply cannot sustain over time.

There is a customization angle too. Remind positions the liner as part of a broader philosophy: you are not stuck with what you are given out of the box, and you can upgrade and fine-tune your equipment to fit your own feet and riding style.

Main Strengths

The standout quality is materials. Remind points out that boot brands commonly cut costs on the inside of the boot, where the liner lives. The Solution Liner takes the opposite approach, using premium materials throughout the interior. On first inspection it reads less like an aftermarket part and more like a high-end stock liner.

Fit is broader than most. The liner runs slightly wider, which testers have found closest to wider liner profiles such as Vans, some wider K2 and Salomon liners, and even reminiscent of a thirty-two liner. The heel held well during flex testing, and the liner showed a useful contrast: flexible where it should flex at the front, with real rigidity through the back.

Heat moldability is another practical advantage. The liner is designed to be custom-molded, so the fit can be tuned rather than accepted as-is. Heel room that feels a touch wide out of the box, for example, can be addressed with heat molding and simple shims.

There is also a reassuring durability signal. The first-generation version of this liner, produced years earlier, was ridden for roughly ten years by the brand’s founder and was still going. Longevity is effectively the core pitch: stock liners break down fast, and a durable aftermarket liner is the piece of the boot that matters most.

Design pedigree helps too. Remind built the liner on its insole experience, working with a medical insole company co-founded by a biomechanical engineer and a biomed engineer, blending that biomechanics foundation with snowboard-specific materials and impact absorption. The bundled insole matters for value as well: on its own, a Remind insole sells for $65, and it comes included with the liner.

Things to Consider Before Buying

First, sizing and width. The liner is deliberately a bit wider, so riders with narrow feet or very low-volume shells should plan on heat molding and possibly shimming the heel to dial the fit.

Second, it is heat-moldable but needs to be molded. Out of the box it is not at its final fit. If you are not comfortable with a heat-molding session at a shop, factor that step in.

Third, it is designed snowboard-first. That is a strength for snowboarders, and ski boot users have reported loving them too, but the design background is snowboard boots rather than ski plugs.

Finally, supply has been limited historically. An earlier version of Remind’s liner disappeared from the market when its manufacturer’s minimum order requirements became unmanageable, and the current Solution Liner is the result of years of redesign and testing since. If you want one, it is worth acting when stock is available.

Buying Advice

At $190 to $195, the Solution Liner sits in premium aftermarket-liner territory. The bundled insole offsets that meaningfully, since buying the insole separately would cost $65 on its own.

The value math is straightforward: if a pair of liners extends your boot shells by several seasons, it beats replacing the entire boot. Riders in the reviewer’s position, with shells that could squeeze out another hundred days but liners that are finished, are exactly who this product is built for.

Remind also signals that this is only the beginning. The brand plans to expand into a full line of liners with different thicknesses and stiffnesses, and a burrito-wrap style liner with a tighter wrap and more power transfer is already in the works. If you want maximum wrap today, that future option may be worth waiting for; if you want a proven, durable, moldable liner now, this is it.

Conclusion

The Remind Solution Liner fills a real gap: a snowboard-first, heat-moldable aftermarket liner made from premium materials, priced at around $190 to $195 with an insole included. For riders who go through stock liners quickly, it offers a credible way to add seasons of life to boots you already love, with the fit customization to make them genuinely your own.