Pony Jorgensen Easy Clamp Heavy-Duty Folding Worktable: A Workbench That Doubles as a Sawhorse

Introduction

Folding worktables tend to trade strength for convenience. The Pony Jorgensen Easy Clamp Heavy-Duty Folding Worktable makes a strong case that you do not have to choose. It is rated at 500 lb as a table and 1,000 lb as a sawhorse, and it sets up fast enough to operate one-handed.

A Brand With History

Pony Jorgensen traces its roots back to 1903, when the Adjustable Clamp Company was founded by Adele Holman, a former professional opera singer, working alongside cabinetmaker Hans Jorgensson and tool salesman Marcus Russ. Holman signed documents as A.V. Holman, reportedly to sidestep the stereotypes attached to a woman running a company in that era. That legacy of clamp expertise carries into the new Easy Clamp folding worktable, and it shows in the design.

What the Easy Clamp Worktable Is

This is a folding worktable that also works as a sawhorse, and it stands apart from similar products because of its simplicity and how universally it adapts to other tools. The table wings are supported by four adjustable legs that move from 30 in to 35 in overall height in one-inch increments, and they adjust very quickly by pulling on them, stepping on them, or using a release. You can open one or both wings, and a cross beam underneath snaps in to lock everything solidly in place. It stays level, which is not something every folding table manages.

Clamps and Bench Dogs

Pony includes four bench dogs: two double-post and two single-post, all with 3/4-inch diameter posts. That sizing makes them universal with other workbenches, and you can also use other bench dogs on this table. The table also ships with two 12-inch medium-duty clamps and two 6-inch ones. The clamps can be mounted directly to the table itself, and the design is compatible with other medium-duty and trigger clamps from brands like Irwin, Bessey, and DeWalt, letting you grab work from many different angles. The tabletop also has printed gradations and scales for measuring during layout work.

Setup, Height Adjustment, and Folding

Everything here is built for speed. The push-button mechanism lets you raise a wing slightly and drop it, all one-handed. Pony rates the table at 500 lb, and the folding mechanism underneath uses actual metal parts to hold the locking bar. One detail worth knowing: if there is weight on the table, the bar will not drop on its own. You have to unweight the table slightly before it releases, which is a sensible safety behavior rather than a flaw.

One caution: there are pinch hazards when folding and unfolding. New users should be a little careful when closing it up.

Storage and Transport

The clamps and bench dogs all stow in a folding compartment underneath the table, so they travel with it. To fold, you push the button, give the center a small kick, and it collapses down. When folded, the locking bar clamps on below so it does not swing around while you move it. The whole cycle takes seconds.

Things to Consider Before Buying

The one-handed operation is genuinely fast, but the folding mechanism rewards a moment of care. Keep fingers and loose clothing clear of the hinge points when collapsing it. Also note that the bar release requires unweighting the table, which is by design.

Buying Advice

If you need a portable work surface that does not feel like a compromise, this is an easy recommendation. As a sawhorse it is rated at 1,000 lb, so it handles heavy stock without complaint, and the universal clamp and bench dog compatibility means it fits into an existing shop rather than forcing new accessories on you.

Conclusion

The Pony Jorgensen Easy Clamp Heavy-Duty Folding Worktable combines a 500 lb table rating, 1,000 lb sawhorse rating, quick one-step height adjustment, and universal clamp compatibility in a package that folds in seconds. For anyone who wants one sturdy surface that can serve as bench, sawhorse, and clamping station, it is a standout.