OEM 22592 Stubby Bit/Nut Driver Review: A Small Tool With Real Charm

Introduction

Sometimes a small tool wins you over before you even use it. The OEM 22592 Stubby Bit/Nut Driver is one of those. It is a compact combination bit and nut driver with a translucent emerald acetate handle that looks genuinely striking when light passes through it. Priced at around ten dollars, it is an easy impulse buy for anyone who keeps a small toolkit in a drawer, a bag, or an RV.

First Impressions

The standout feature is the handle. The emerald-colored acetate is translucent, and when illuminated from behind it glows in a way that feels closer to jewelry than hardware. The product listing captures that translucence well, which is part of what makes the tool so tempting at its price point. In hand, there is plenty of real estate to get a solid grip, and the short stubby form makes it easy to stash almost anywhere.

The Hex Shaft Advantage

The design is similar to a well-known Klein stubby driver, but there are a few notable differences, and some of them work in this tool’s favor. Where the Klein uses a round shaft to accept its bits, the OEM 22592 uses a hex-shaped receiver. That hex opening measures 7/16 inch across, a useful size even if it is not especially common, so the handle itself can double as a nut driver for that size.

One practical detail: the shaft includes alignment tabs, so bits need to be lined up correctly when inserting them. It takes a moment, but it is not a real annoyance in use.

Bit Selection and Compatibility

Out of the box you get three nut driver sizes: 7/16 inch, 5/16 inch, and 1/4 inch. The 5/16 and 1/4 are both very common in everyday work, which makes the set genuinely practical rather than a novelty.

The two included bits are best described as specialized rather than proprietary. They come in two different sizes to fit the two different-sized nut driver sockets, and they are interchangeable with Klein and other tools that use this same design style. The compatibility even runs the other way: the Klein’s round-shaft bits fit into this OEM handle, though the reverse is not true because of the hex versus round shaft difference.

Both this tool and the comparable Klein use acetate handles, and both are made in Taiwan. The Klein adds a rubber overmold, while the OEM relies on the bare translucent acetate for its look and feel.

Who Should Buy It

At around ten dollars, this driver costs a couple dollars less than the comparable multi-stubby Klein, and for that money you get a three-size nut driver set plus four bits that all interchange in the single handle. That is a lot of capability in one compact tool.

It is a natural fit for an RV toolkit, a glovebox, or a small go-bag, which is exactly where this one is headed. Anyone who already owns compatible Klein-style bits gets extra value from the interchangeability.

Buying Advice

If you already own a Klein stubby and like it, the main reasons to add this one are the 7/16 nut driver capability that the round-shaft design misses, and the lower price. If you are starting from zero, this is arguably the better pick because of the hex shaft’s added flexibility. Just be prepared to align bits with the tabs when swapping them.

Conclusion

The OEM 22592 Stubby Bit/Nut Driver is a small, inexpensive tool that gets the fundamentals right: useful common nut driver sizes, broad bit compatibility, a comfortable grip, and a handle that is hard not to admire. For ten dollars, it is an easy recommendation for compact toolkits.