New Milwaukee Tools for 2025: 13 Launches Worth Knowing About

Introduction

Milwaukee’s latest wave of launches covers an unusually wide range: concrete dust control, rebar cutting, site power management, water removal, laser layout, and even outdoor power equipment. Below is a practical walkthrough of 13 new and newly announced tools, what each one actually does, and the numbers that matter if you are deciding whether to add them to your kit.

M18 Fuel 0888 Packout Dust Extractor

The M18 Fuel 0888 is a dual-battery Packout dust extractor that runs on battery power or 110/120V wall power, so you can pick the source that suits the job. On battery it moves 125 CFM, and plugged in that rises to 175 CFM. It features a dual automatic filter cleaning mechanism, two HEPA filters, and OSHA Table 1 compliance.

It is also Packout compatible, letting you click extra toolboxes or organizers on top and move the whole system together. It was announced for release in the second quarter of 2025.

M18 2908 5/8-Inch SDS Plus Rotary Hammer

The M18 2908 delivers 1,400 RPM, 5,000 BPM, and 1.3 ft-lbs of impact energy. Kitted with a 3Ah battery, it is claimed to drill 894 1/4-inch holes at 2 inches deep on one charge.

Safety is handled by Milwaukee’s anti-vibration system and AutoStop anti-kickback controls, which help protect you and the tool if you hit something hidden inside a wall. It was announced for April 2025 availability.

M18 2675 Rebar Cutter

The M18 2675 cuts rebar up to 1 and 1/4 inches, reaching number five rebar when paired with an XC 6Ah High Output battery. Milwaukee claims 240 cuts of number five rebar per battery pack. A rapid stop feature halts the blade in under a second, which adds a genuine safety margin on tight sites. Availability was slated for the second quarter of 2025.

M18 2930 Rear Handle Circular Saw

An update to a modern classic, the M18 2930 is a 7-1/4-inch rear handle circular saw built for pros. It spins at 6,000 RPM and comes kitted with a 7-1/4-inch thin kerf blade. The previous 2830 already outperformed corded models, and this one is claimed to be 20% stronger and faster still, with about 700 cuts per charge on a Forge 12Ah battery.

Rear handle saws are known for torque that powers through wet pressure-treated lumber, and this release raises the bar again. Expect it in the third quarter of 2025, with pricing to be announced.

Milwaukee 3333 Power Manager

The 3333 Power Manager is more than a power strip. Designed for 15 or 20 amp circuits, it lets you plug in and manage a bank of M12, M18, and MX Fuel chargers in one location, with around a dozen outlets available.

The key difference from a plain strip is monitoring: you can track what each connected device is doing. It was slated for March 2025, so check your retailer for pricing.

MXF600 MX Fuel Backpack Blower

The MXF600 targets landscape crews who work in noise-sensitive areas. It pushes up to 800 CFM with 30 N of blowing force and a 190 MPH top air speed, all at just 64 dB. Multiple blowing modes ranging from 17 to 30 N let you trade power for runtime.

Paired with an MX Fuel Forge HD 12.0 battery, expect roughly 20 minutes of run time, which stretches further in real use since blowing typically happens in bursts. It was announced for April 2025 with pricing to be announced.

M18 48-50-9817 6-Bay Daisy Chain Rapid Charger

Keeping a crew’s batteries ready is one of the biggest job site chores, and this charger tackles it directly. The 48-50-9817 has six bays and can be daisy chained: connect up to 10 chargers and charge 60 M18 batteries off a single 15 amp circuit.

It is a rapid charger, faster than Milwaukee’s standard unit but not as fast as the Supercharger, which sits comfortably for overnight turnaround. It is available now for $299.

M18 2940 Stick Transfer Pump

The M18 2940 is a brushless stick transfer pump built for moving standing water. It is submersible up to 48 inches with a 17-foot maximum head, moving 25 gallons per minute and up to 1,000 gallons per charge on an M18 Forge 12Ah battery.

It accepts a 1-1/4-inch discharge hose or, via the included Y adapter, one or two standard 3/4-inch garden hoses. A 360-degree inlet with a hydro filter at the bottom helps shield against clogs. Pool and jacuzzi service, tank drainage, and general site dewatering are obvious fits. It sells for $399.

M18 48-59-1816 Dual Bay Supercharger

Speed is the story here. The M18 dual bay simultaneous Supercharger charges up to six times faster than standard M18 chargers, taking Forge 8.0 and 12.0 batteries to 80% in 35 minutes and 6.0 XC batteries to 80% in 15 minutes.

Cool Cycle technology begins cooling the battery as soon as it connects, which matters after hot, high-demand work like grinding. It is available for $249.

M12 3642 360-Degree Laser

The M12 3642 is a 360-degree three-plane laser with automatic alignment and a receiver. On the included 4Ah battery it runs up to 10 hours, with a maximum range of 125 feet using the detector.

Self-leveling covers a plus or minus 4-degree range, and a micro-adjustment dial makes it accurate to within 1/16 of an inch at 33 feet, or plus or minus 1/8 inch at 125 feet with automatic alignment. The green beam is 70% brighter than the previous 3632 model. It is available now for $1,200.

MXF RC MX Fuel Rapid Charger

The MXF RC rapid charger tops off MX Fuel 8.0 batteries in 65 minutes instead of the usual 110, cutting charge time nearly in half. It also features Cool Cycle technology to cool batteries after heat or high-demand work before charging begins. It is available for $349.

M18 Force Logic Underground Cable Cutter

The most specialized release here, the M18 Force Logic 5-inch underground cable cutter uses a guillotine-style jaw that handles armored communications cable, lead sheet, and copper or aluminum power cable up to 3 inches. The head rotates 180 degrees for positioning.

Operation is via a wireless Bluetooth remote, so the tool can be suspended into a manhole on cables and triggered from above. One-Key tracking is built in. At roughly $7,500 it is a serious investment, but options in this niche are few.

M18 Fuel Hedge Trimmer

Rounding out the lineup is the M18 Fuel hedge trimmer for outdoor power equipment users. It reaches 3,200 SPM and slices through branches up to 1-1/4 inches thick, with dual-sided, dual-sharpened blades designed to handle a wide range of trimming tasks without bogging down.

A five-position rotating handle adds versatility for awkward cuts. It is available now in a 24-inch model for $479 and a 30-inch model for $529.

Overall Buying Advice

Several of these tools are still months from shelves, so availability planning matters as much as specs. The 6-bay daisy chain charger, dual bay Supercharger, stick transfer pump, M12 laser, MX Fuel rapid charger, and hedge trimmer are available today with confirmed pricing. The dust extractor, rotary hammer, rebar cutter, circular saw, power manager, blower, and cable cutter should be tracked through their announced release windows.

If your work revolves around battery logistics, the charger lineup is the strongest value cluster. For specialty trades, the Force Logic cutter and the transfer pump solve problems that few competitors address at all.

Conclusion

This generation of Milwaukee launches shows a clear pattern: faster charging, smarter site power, and purpose-built tools for niche field problems. Match each tool to a real task on your job site, and the ones that fit will pay for themselves in time saved.