New Makita 40V Tools Worth Knowing About: The Full Lineup Breakdown

Introduction

Makita’s 40V XGT platform keeps expanding, and the latest wave of releases covers an unusually wide range: woodworking, outdoor power equipment, site cleanup, and even a few surprises like a cordless kettle and a handheld air duster. This roundup walks through the tools that have just launched, the ones arriving soon, and the handful of details that matter when deciding whether any of them deserve a spot on your bench.

40V Trim Routers: Makita RT001G and RT002G

Makita is releasing two trim routers that are essentially one tool sold in two configurations. The RT001G comes with a standard base, while the RT002G comes with a plunge base. It is a slightly odd naming choice, since the tools themselves do not appear to differ, but it does make the choice simple: pick the base style you need.

The 40V version runs up to 31,000 RPM, a full 1,000 RPM higher than the 18V model, with variable speed control. Makita claims the 40V tool gets work done 35% quicker, and it also comes with AWS for automatic dust extraction triggering. Regional availability differs too: some markets list the standard-base version, while others offer the plunge-base bundle, so check what your local lineup includes before ordering.

The 64V Lawn Mowers: LM001J and LM002J

Alongside the 40V push, Makita has introduced a 64V battery aimed at a very specific buyer: someone who wants a battery lawn mower without buying into a whole battery ecosystem. The 64V line is positioned as a budget range, currently released only in select markets with Europe expected to follow.

At launch it is available with two mowers. The LM001J cuts a 460 mm swath and the LM002J cuts 534 mm. Both are IPX4-rated, with cutting heights, widths, and speeds similar to Makita’s existing mowers. If you do not already own a stack of 18V or 40V batteries, this is the low-cost entry point into a Makita battery mower.

Pole Chainsaw and Split Shaft: MUA002G and UX01G

The MUA002G pole chainsaw carries a 250 mm (10 inch) bar and extends to just under 4 m, letting you cut branches up to 5 m above your head. Makita claims it outperforms the 35cc petrol four-stroke equivalent, and the 40V setup manages the equivalent of 35cc displacement where the previous 36V dual-battery model reached around 30cc. Running a single battery also keeps the tool lighter and more compact, and unlike the four-stroke version, it includes a hook for pulling down cut branches.

If you want more than a pole saw, the UX01G split shaft power head accepts existing attachments, including pole saws, sweepers, cultivators, line trimmers, and blowers. Better still, attachments from the 18V, four-stroke, and older dual-battery systems all fit, so upgrading means buying only the new power head rather than replacing every attachment you own.

Portable Band Saw: PB002G

The PB002G is the new 40V portable band saw, capable of cutting material up to 127 mm (about 5 inches) in diameter. Details beyond that are still thin, and the model number hints that another band saw, possibly a different size, is already in production. If you do regular metalwork or conduit cutting on site, this is one to watch.

The 40V Kettle: KT001G

Yes, it is a kettle, and it is genuinely interesting. The KT001G boils 800 ml of water in roughly 7 minutes and is about 600 g lighter than the earlier 18V dual-battery version. It takes two 40V batteries, likely drawing on one at a time, and should manage around 3 litres boiled on a pair of 5.0Ah batteries. It ships in teal and olive green, and it is a natural fit for site sheds, campervans, and anywhere a power point is not guaranteed.

Two New Vacuums: CL002G and VC005G

The CL002G stick vacuum is the paper-bag variant of the CL001G. The bag system contains dust better, which suits allergy sufferers, but running costs add up in a workshop setting and capacity drops from 730 ml to 500 ml. Beyond that it is essentially the same tool and can run with a cyclone separator like its sibling.

The VC005G is a simpler dry-only vacuum without AWS, using paper bags for dust collection. Runtime is a strong point: up to 6 hours on the lowest setting with an 8.0Ah battery, or 44 minutes at full power. With this addition, the 40V vacuum range now offers at least seven options.

Pin Nailer: PT001G

The PT001G is a 40V, 23-gauge pin nailer, IP56-rated and firing the same nail sizes and capacities as the 18V version. Makita says it delivers about 20% more driving force, and a 2.5Ah battery should get you around 6,000 nails, so battery life will not be a concern. It uses the same spring-loaded firing mechanism as the FN001G brad nailer. Note that this is a pin tacker, not a framing nailer.

Mid-Torque Impact Wrenches: TW008G and TW007G

The 40V mid-torque range has landed in two flavors. The TW008G uses a detent pin, though unusually it comes to a point rather than the typical ball shape. The TW007G uses a friction ring. Both are rated at 650 Nm of tightening force and 1,100 Nm of nut-busting torque, with a range of modes and controls on the foot of the tool. Choose the pin for secure socket retention or the friction ring for faster socket changes.

Cordless Fan: CF002G

The CF002G is a new 13-inch (330 cm diameter) fan, and in hot summer working conditions it has proven genuinely useful with excellent battery life. For site sheds, workshops, or outdoor work in warm weather, a 40V fan is one of those unglamorous tools that quietly earns its keep.

Circular and Plunge Saws: HS004G and SP001G

The SP001G plunge saw has been making quiet appearances in workshops lately and early impressions are very positive. It is an in-depth tool that rewards a proper look before buying, so it is worth reading a detailed review before committing.

The HS004G is a 40V circular saw with a 185 mm (7-1/4 inch) blade, very similar to the HS003 but with the addition of a track option for running it on a guide rail. That capability does reduce the maximum depth of cut, which is worth factoring in if you cut thick material regularly. If you want occasional track cutting without the complexity of a plunge saw, this one finally makes sense.

Handheld Air Duster and Heat Gun: AS001G and DHG181

The AS001G air duster is a handheld blower with a surprising number of uses. Five nozzles clip in and release like an impact driver bit, there are four speed settings, and plenty of additional attachments are available. It has already proven itself in real life, blasting debris out of a rattling air conditioning unit and fixing the noise on the spot. For electronics cleanup, sawdust, and quick drying tasks, it is a genuinely handy tool to keep charged.

The DHG181 heat gun was expected in shops around now, but its release has been delayed and is likely a couple of months out. If a 40V heat gun is on your list, patience is required for a little longer.

Overall Buying Advice

The clear theme here is ecosystem depth. If you already run Makita 40V batteries, the routers, impact wrenches, vacuums, and saws slot straight in. The 64V mower line is the exception, deliberately aimed at buyers who want one standalone battery tool rather than a full platform. For anyone choosing between configurations, such as the router bases or the two impact wrench anvil styles, match the accessory to how you actually work rather than defaulting to whichever model number is lower.

Conclusion

Makita’s newest releases show a platform maturing in every direction, from precision woodworking to outdoor cleanup and even site comfort. The standout picks depend on your trade, but the trim routers, mid-torque wrenches, and the air duster are arguably the most broadly useful of the bunch. Watch for delayed releases like the heat gun and regional differences in what ships with each tool before you buy.