Makita's Latest Tools: Nine New Releases Worth Watching

Introduction

Makita has been busy expanding its 40V max XGT line, and the latest announcements lean heavily toward commercial and industrial users. There are also a few 18V LTX updates and a new ConnectX ecosystem piece in the mix. Here is a rundown of nine new tools and systems, with the specs and pricing that matter most.

40V max XGT Oscillating Multi-Tool

Makita’s XGT expansion now includes a 40V max oscillating multi-tool. It accepts Starlock Max and Starlock Plus accessories, runs at 10,000 to 20,000 oscillations per minute, and has a 3.6-degree oscillation angle. The tool measures about 12 inches long and uses a top-mounted sliding on/off switch.

One standout characteristic of Makita’s multi-tool design is the low felt vibration, which makes extended cutting and sanding sessions more comfortable than with most competitors. The 40V version essentially brings bigger battery capacity to a familiar 18V-style layout. It is priced at $259 as a bare tool.

40V max XGT 3x21 Belt Sander

This cordless belt sander pairs a forward grip with a rear handle and loads the battery on top. Belt speed tops out at 1,540 feet per minute, with a variable speed dial and trigger lock-on to reduce fatigue during long sanding sessions.

An automatic belt tracking system keeps new belts self-centering, and the adjustable front handle tilts backward 30 degrees, sits vertically at zero, or angles forward 60 degrees, so you can set it up for floor work near baseboards or bench-height sanding. It is also AWS compatible, so it can trigger a connected dust extraction vacuum automatically. The bare tool runs $319.

40V max XGT 16-Gauge Rebar Tying Tool

If you set rebar regularly, this one has generated a lot of buzz online. Instead of hand-tying, the tool grips the rebar and ties it with 16-gauge wire, producing a claimed 65% stronger tie while working 30% faster than manual tying.

A deep jaw supports larger rebar sizes, and the tool manages 3,600 ties per charge even with a smaller 2.5Ah battery. Each wire reel delivers up to 245 ties. Pricing has not been announced yet and the tool is not in stores, but availability is expected soon.

XGT Anti-Theft Battery Pairing System

Announced at World of Concrete, this is not a tool but a management system for 40V max XGT batteries and tools. You set a PIN code from a computer, upload it to an adapter, and pair specific batteries with specific tools. A paired tool only runs with batteries sharing the same PIN.

The idea is on-site battery control: assign a gang box of tools to a job or batteries to individual crew members, and if anything walks off site it is useless to anyone else. All data stays with the user; nothing is transmitted back to Makita. Pricing and availability are still to be announced.

40V max XGT 3/8-Inch Metal Hole Puncher

For punching holes in metal plate without drilling, this 40V max hole puncher cuts mild steel up to 3/8 inch thick and stainless up to 1/4 inch thick. Makita claims hole punching in as little as 3.8 seconds and speeds up to 25% faster than the previous 18V version.

A punch-stop mechanism automatically retracts the die when a punch is complete, reducing downtime, and the tool carries over a drill-style handle, auxiliary handle, rubberized soft grip, and onboard LED light. It is priced around $3,000.

80V max Breaker Hammer

Cordless demolition is here: this breaker hammer runs on two 40V max batteries and delivers 53.7 foot-pounds of impact energy at 870 beats per minute. Compared with the corded model, Makita claims 70% faster breaking and 30% less vibration.

Onboard dual lighting helps in dark demolition spaces, and the freedom from needing a power source makes it practical for awkward job sites. It is available as a kit for $2,600 with two 4Ah batteries, or $3,100 with four 4Ah batteries if continuous production matters more than budget.

ConnectX 1,500Wh Portable Power Supply

The ConnectX portable power supply grows from 1,200 watt-hours in the previous version to 1,500 watt-hours. That translates to roughly two hours of trigger time with a ConnectX backpack blower, up from about an hour and a half.

It mounts directly to select products or the backpack harness and works with the ConnectX platform, with adapters available for 40V max XGT and 18V X2 (36V) LTX tools. Run times vary by product. Full charging takes 450 minutes using a separate power supply, which is sold separately. It retails for $1,600.

ConnectX Backpack Blower

The new ConnectX backpack blower pairs with the power supply worn on the harness, delivering up to two hours of runtime. It pushes 696 CFM of air volume with 24 Newtons of force, plenty for moving leaves and debris across a property.

A variable speed trigger lets you feather the output when light touch is needed. As a bare tool without the power pack, it is priced at $769.

18V LTX Articulating Pole Saw

Back on the 18V platform, this articulating pole saw adjusts from 6 to 9 feet, giving up to 14 feet of reach. The brushless motor manages up to 500 cuts per charge through 2x2 cedar on a single 5.0Ah battery.

The head articulates through 120 degrees, the shaft extends, and the chain tightens without tools. At 7.6 pounds with a battery, it is notably light for a pole saw. It is sold as a bare tool only for $199, and it is a complete kit in itself: articulating head, extension pole, and battery handle all included, which makes it a solid value.

18V LTX Quick-Shift 4-Speed Impact Driver

The updated 4-speed impact driver keeps a familiar layout but moves the controls from the front of the tool to the back of the handle. Four speed modes top out at 3,600 RPM and 3,800 impacts per minute.

An assist mode helps start screws and minimizes bit cam-out, and a tightening mode speeds up fastening. An LED ring around the front casts even light across the workpiece with minimal shadows. It is lightweight and priced at $234 as a bare tool, with the mode control panel on the rear letting you dial in the tool for different fasteners.

Buying Advice

The pattern here is clear: Makita is pushing 40V max XGT hard into commercial and industrial territory, tools you will not necessarily see on big-box shelves but that make sense if your trade calls for them. Concrete and demolition contractors have the most new options, from the rebar tier to the breaker hammer. 18V users get worthwhile refreshes in the pole saw and impact driver, and anyone invested in ConnectX should look at the larger power supply for the extra runtime.

Conclusion

Makita’s latest lineup covers everything from precision fastening to heavy demolition, with low vibration, dust management, and battery security woven throughout. Whether the 40V max XGT line belongs in your kit depends on your trade, but the newest releases make a strong case for the platform.