New Makita 40V XGT Tools Roundup: Cultivators, Brush Cutters, a Microwave and More

Introduction

Makita’s XGT 40V lineup keeps expanding into territory cordless tools have never really covered before, and the newest batch of announcements is a good example. This roundup covers a full walk-behind cultivator, a mister, four new brush cutters, a genuinely cordless microwave, a pair of specialized Huck rivet tools that cost more than most cars, and two redesigned sliding miter saws. Some of these will be immediately useful to a wide audience, and some are so niche that most readers will simply enjoy knowing they exist.

Makita KR001G Rotary Hoe / Cultivator

The KR001G is a full walk-behind rotary hoe or cultivator, and Makita positions it as roughly equivalent to a 50cc petrol model. It runs on Makita XGT 40V batteries, needing only one battery to operate, but you can run two for extended runtime. With two 8Ah batteries fitted, Makita claims around one hour of use.

Because it does not rely on petrol, it can even be used indoors in something like a large greenhouse without needing extra air extraction. Multiple soil attachments are available depending on the job, and the unit folds up for transport, with a small tray to catch dirt before it falls into your vehicle. For Makita watchers, it is also worth noting this is the closest the brand has come so far to anything snow-removal related, so that direction may still be coming.

Makita PM001G Mister

The PM001G is a 40V mister, another two-battery-capable tool where a second battery simply extends runtime rather than being required. It moves a maximum air volume of 14.3 cubic meters per minute at a maximum airspeed of 64 meters per second, and it carries a 15 liter tank.

This is a highly specialized tool that most people will never need, but for those who do need disinfectant or treatment misting capability, a cordless version is genuinely convenient.

New XGT 40V Brush Cutters: UR015G to UR018G

Makita has added four new 40V brush cutters: the UR015G, UR016G, UR017G, and UR018G. Each delivers power equivalent to a 23cc petrol model, and the model numbers primarily distinguish handle styles, including bike-handle and D-handle configurations. For long work sessions, the bike-handle style tends to be the more comfortable choice.

Weight matters a lot with brush cutters since they are often used for extended periods, and these come in at around 3.8kg without a handle and about 4.4kg with the bike-handle setup. Makita makes an enormous number of line trimmers and brush cutters in general, with straight shafts, bent shafts, and endless handle options, so there is very likely a variant that matches your specific work.

The XGT 40V Microwave Is Real

Yes, Makita makes a microwave. The XGT 40V microwave is out now, and a full review is planned. Despite nearly every image showing two batteries installed, it is a 40V max tool, not an 80V tool, so only one battery is required. For sensible runtime, Makita suggests two batteries, which yields about 35 minutes of use with two 8Ah packs.

It outputs 500 watts on the highest setting and the timer can be set for up to 20 minutes. One practical touch: when the filter on the back needs cleaning out, the AES001G dust blower is a handy companion for the job. Availability is currently limited, with the tool largely Japan-only for now, but it is expected to roll out across much of the world from May.

Makita Huck BV13 and BV17 Rivet Tools

This pair is the most specialized Makita 40V release yet, and also the most expensive Makita cordless tool seen to date. The units are built on Makita’s battery platform with the riveting mechanism supplied by Huck. The BV13 handles rivets starting at 8mm (5/16 of an inch) up to 12.8mm (half an inch), which is firmly aerospace territory rather than everyday building work. The BV17 is made specifically for Huck bolt fastening products.

The specs are serious: a 45mm stroke length, well beyond the 30mm pull stroke of the 18V Makita and Milwaukee rivet tools, and pulling forces of 56kN for the BV13 and 76kN for the BV17, which works out to roughly 13,000 and 17,000 pounds of pressure respectively.

On price, these are not average trade or DIY tools. They can run around NZ$16,000 or US$10,000, with pricing seen as low as roughly US$8,200 in bulk purchases of 40 units. For most readers this is simply a fascinating look at how far cordless platforms now reach, but for aerospace and specialized industrial users, it is a genuine option.

New XGT Miter Saws: LS008G and LS009G

Two new sliding compound miter saws round out the batch. The LS008G uses a 190mm blade while the LS009G uses a 165mm blade. The most obvious design change from earlier models is that the rails sit on the right-hand side of the head unit rather than the left, which makes blade changes noticeably easier since the blade is completely clear with no interference.

Both saws can cut a 50mm thick board up to 300mm wide, and both bevel left and right. A small support leg on the side adds stability for large timber. Weight is a genuine highlight at around 12kg, making these very portable, and the 165mm LS009G looks particularly well suited to flooring installers who need a light saw to carry between rooms for laminate work. Both come with AWS to run a vacuum, though worldwide release plans remain unclear, with no confirmed launch in New Zealand yet.

Buying Advice

If your work involves soil preparation, the KR001G is the most broadly interesting release here, especially if you want to move away from petrol equipment or need to work in enclosed spaces. The UR015G to UR018G brush cutters are the practical pick for property maintenance, with handle choice being the main decision point. The microwave is a genuine curiosity that will appeal most to van lifers, site crews, and off-grid setups, provided it becomes available in your region. The Huck rivet tools and the mister are strictly specialized purchases, so treat them as confirmation of how deep the XGT platform now goes rather than items for a shopping list. The miter saws reward buyers who value portability and easier blade access.

Conclusion

This batch of Makita releases shows a 40V platform pushing into lawn care, outdoor power equipment, site comfort, and heavy industrial niches all at once. The cultivator, brush cutters, and miter saws are the ones most readers could realistically add to a kit, while the microwave and Huck rivet tools prove just how wide Makita’s cordless ambitions have become. As always with new releases, checking regional availability before ordering is worthwhile, since several of these tools are still rolling out gradually around the world.