New HiKOKI Tools Worth Knowing About: 10 Recent Releases

Introduction

HiKOKI, known as Metabo HPT in the United States, has quietly rolled out a substantial batch of new tools over the past several months. Many of these have shipped first in Japan, with wider regional availability still catching up, so some of these may be new to you even if you follow the brand closely.

The lineup covers a wide range: an installation driver, rotary and demolition hammers, impact wrenches, dust extraction, circular and metal-cutting saws, a miter saw, a tire inflator, and a new flagship impact driver. There is also movement on the battery side, with refreshed multi-volt batteries, a Bluetooth battery option for app-based settings, and talk of a dedicated 36V-only battery range to better compete with the biggest industrial platforms.

Below is a run-through of the ten tools that stand out, what they do well, and who each one actually makes sense for.

A Compact 18V Blower

This small blower has been around for a while now but is still not available in most of the world, and it may not even be outside Japan yet. It is remarkably light and works well for quick clean-ups around a bench or site.

It runs on multi-volt batteries, using them at 18V while remaining compatible with 36V tools. If you can source one, it is a handy, no-drama addition to a HiKOKI kit.

Rotary Hammers and Demolition Hammers

The DH3640DA and DH3640DB rotary hammers come in SDS Max and hex shaft versions respectively, giving tradespeople a choice depending on their bit ecosystem. Alongside them, HiKOKI has introduced a new pair of demolition hammers rated at 6.8 joules, which is on the modest side compared to some rivals, though figures as high as 10 joules have circulated.

Weight figures vary widely depending on the source, landing somewhere between 4.8 and 6.1 kg. What is clear is that these are compact, short-bodied tools, and being able to chip away productively with something that small is a genuine advantage in tight spaces.

A Mid-Torque Impact Wrench with App Control

The W36DE is a 1/2-inch square drive impact wrench with a maximum tightening torque of 630 Nm and 900 Nm loosening torque. It is a good-sized, versatile tool that suits a wide range of fastening work.

It also makes use of the Bluetooth battery, so with the app you can adjust speed modes, lights, and auto-stop timing when removing nuts. For anyone who appreciates a well-balanced mid-torque wrench, this one is worth a look.

An 18V Over-the-Shoulder Dust Extractor

The RP18DA is an 18V over-the-shoulder style vac that doubles as a dust extractor for rotary hammer drilling or as a wet/dry vac. It weighs about 4.9 kg with a battery fitted, and there is an L-class model as well as a standard hip-filter version.

It is not quite as compact or elegant as some integrated dust extraction systems, and it is a bit cumbersome, but it offers plenty of capacity for extended drilling sessions, which is where it earns its place.

A 125mm Circular Saw with Reverse Bevel

The C1805DB is the 18V version of a 36V saw with a clever party trick: the front of the base comes off, and a lever lets the saw bevel the opposite way, up to 15 degrees on a reverse angle. Combine that with the removable front and you can bevel hard up against a wall.

For cutting out floorboards during renovations, it is a standout. It beats using a multi-tool or reciprocating saw for this job, producing a far cleaner cut far more quickly. If you cut out rotten floors regularly, this design is a genuine must-have.

A Big 305mm Miter Saw

The C3612DA is a 305mm (12-inch) miter saw with a top speed of 4,000 RPM, dropping to 3,200 RPM when it kicks into high torque mode under load. It weighs around 24.5 kg, roughly 5 kg lighter than the comparable 300mm Makita.

Cutting capacity figures are interesting: some listings quote 120mm deep by 180mm wide, which is an unusually deep cut, while the officially listed maximum is 107 by 312mm. That width falls short of some rivals, but the depth is impressive. It comes with a shadow line rather than a laser, which is the better choice on a miter saw.

A 160 PSI Tire Inflator

The UP18DA is a 160 PSI (11 bar) tire inflator that also handles balls and other inflatables. Flow rate runs between 14 and 430 litres per minute, and it can run on 14.4V batteries, 18V batteries, or a 12V cigarette lighter socket.

It has been a long time coming, and it rounds out the lineup nicely for anyone already invested in HiKOKI batteries.

A Cold-Cut Metal Saw

The CD1805D is an 18V metal-cutting circular saw taking a 135mm to 150mm blade. It features a chip collector on top and is compact and nicely sized for a metal saw.

Metal circular saws remain one of the more satisfying tool categories, and this is a tidy, practical entry in the 18V class.

Batteries, Colors, and Platform Questions

The refreshed multi-volt batteries look considerably better than the earlier versions, and there is a Bluetooth model that enables app-based adjustment of torque settings, lights, and other modes. Japan also gets a range of JDM color options across several tools, some of which never leave the domestic market.

On the platform side, HiKOKI is exploring a 36V-only battery range, presumably to compete with the largest industrial systems, since its current largest battery is relatively small compared to the competition. The company has also been recruiting other brands to use multi-volt batteries, following a multi-platform approach similar to what Bosch has started doing, and related to the CAS system that came with Metabo, now part of the same group.

A New Flagship Impact Driver

The W36DD is a triple-hammer impact driver and the new top-of-the-line model in the range. It is 111mm long, 3mm shorter than the previous model, and its three forward-facing lights almost form a ring light around the nose.

The buttons near the base are backlit, a feature the last model lacked, and settings can be changed through the Bluetooth app when paired with a Bluetooth battery. It is available in five colors, some of which are Japan-only, and its very compact head makes it appealing for driving fasteners in tight spots.

Conclusion

HiKOKI’s recent releases show a brand filling out its lineup sensibly: clever renovation tools like the reverse-bevel circular saw, workhorse trade tools in the rotary hammers and impact wrench, and useful additions like the inflator and metal saw. Many of these ship from Japan first, so availability will vary by region. If any of them match a gap in your current kit, they are worth tracking down as they roll out more widely.