Snowboarding

GNU Anti-Gravity Review: A Do-It-All Camber Board for Intermediate Riders

A C3 camber all-mountain freestyle snowboard tested in mixed spring conditions, covering stability, pop, buttering, jibbing, and carving.

GNU Anti-Gravity snowboard displayed on a concrete surface with snow texture at the edges

Introduction

The GNU Anti-Gravity is an all-mountain freestyle board built around Mervin manufacturing and a C3 camber profile. It was ridden at Copper Mountain in a wide mix of conditions: overcast skies, warmer temperatures, slush, chop, and flat light, paired with Rome Black Label bindings and K2 boots. That varied setup makes it a good candidate to judge whether one board can really cover the whole mountain.

Who This Board Is For

The rider in mind here is the do-it-all intermediate who owns exactly one board. Someone going from the peak to the park, through the powder, and cruising the blues without wanting to think about gear along the way. If that describes how you ride, the Anti-Gravity fits that brief well. It is a solid board for its category, possibly a hair stiffer than comparable boards from other brands, which simply means working a little harder to get a little more performance out of it.

Camber Profile and Flex

The C3 profile puts camber underfoot with a slight reverse dip between the feet, then a longer flat section in the tip and tail. That translates into the load, pop, snap, and drive of traditional camber, combined with easier entry in and out of turns and a more optimal sweet spot to press and butter. In practice it feels like a broken-in cambered board: very easy to engage, predictable when you load it up and roll back on the tail.

Snowboarder cruising a wide blue groomer in soft spring light

Flex sits right around the middle of the road, with a bit more play in the tip and tail thanks to where the flat sections sit. Outside the inserts, where the camber comes down, the board stiffens until it reaches the reverse dip between the feet, which aids torsional flex. Stability is solid for the most part: the construction dampens the kinetic energy that would otherwise come up under your foot and fatigue you. The tips do take some chattery battering, but most of it is killed off before it reaches the insert packs.

In softer, lumpy snow it pushes through nicely. On firmer snow it skips across the top a bit. It was never a board that felt like it would buck you around if you let your guard down, though keeping your knees bent never hurts anyway.

Pop, Jumps, and Airtime

The snap is predictable rather than extreme. It is not the snappiest board out there, but it has more than enough to get the job done, which makes it easy for hits, side hits, or launching rollers. When you load up the camber section and roll back on the tail, it snaps, and you know exactly what you are going to get.

For jumps, small through large, it can handle them all, with small and medium jumps as a real strong suit. If you are heading to the bigger lines, be a competent rider first. A laid-back approach off the lip will simply throw you, but if you load it up and pop at the last minute, you get extra snap and a bit more height and distance. Takeoffs and landings are both very predictable, and it sets down nicely in the landing.

Snowboarder launching off a small park jump in mid-air

Buttering and Jibbing

Those flat sections before the upkick in the nose and tail create big, forgiving sweet spots for butters. Lean your weight out over the flat section, press into it, and it holds without fighting you. There is a touch of rebound, but not enough that you need to bring your A game. One caveat: that rebound does not hand you free snap on the way out. Unless you really accentuate your hips out over the board, you will not get much return.

Snowboarder pressing on a rail feature in a terrain park

The same behavior carries over to jibbing. It locks into presses, so nose and tail presses hold until you reach the end of the feature, then pop out. When you go sideways onto a feature, the slight dip in the C3 will kick a bit more under your front or back foot depending on your weight placement, so do not expect it to fully cradle you if you come straight into the middle. The abundant flex does help it wrap around features comfortably. It would not be the first choice of a jib board in the GNU lineup, but it gets the job done.

Carving and Edge Hold

Edge-to-edge power transmission is smooth and kind of mellow rather than aggressive. Transitions from toe edge, through flat base, back over to the heel edge happen without a lot of power input, which helps with short, tight, quick carves and medium, mellow carves.

Snowboarder laying down a deep carve on a groomed run

For deeper, more aggressive carves you have to work for it: drive your knee into the center of the board, push down into the C3, and drive off the tail. Do that and it will lay over for a eurocarve. What it will not do is rip hard slingshot-style turns where you snap out of one carve and immediately transition into the next; there is a slight delay there. Overall it feels most at home cruising the blues with big swoopy turns where you lock in, feel it grip, and do not have to worry about a thing.

Buying Advice

Snap is solid, edge hold is solid, and you can do just about anything with this board. It is a board you get on and then forget it is there; it simply does what you need it to do. Comparable boards worth cross-shopping include the Wired Recon, Rome Warden, and Ride Shadowban. If those do not sound right, recommended alternatives include the Bent Metal Action, Ride C-6, and Rome Vice bindings. Sizing runs from 150 up to 162, including 159 wide and 162 wide options, so there is coverage for most riders.

Conclusion

The GNU Anti-Gravity is a dependable one-board solution for the intermediate all-mountain freestyle rider. The C3 camber delivers predictable pop, forgiving butters, and stable cruising, asking only a little more effort when you want maximum performance. For riders who want one deck to cover peak, park, powder, and groomers, it earns a place on the shortlist.

Product link

View more details for GNU Anti-Gravity

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for GNU Anti-Gravity

Further reading

Related Reviews

Snowboard gear flat-lay with board, boots, bindings and goggles on concrete

Snowboarding

2025 Snowboard Gear List: Five Picks That Earned Their Place on the Mountain

From Zeiss-lens goggles to a hybrid step-in binding, here are five pieces of 2025 snowboard gear that held up across a full season of riding.

10/15/2026
Flat-lay of snowboard gear including board, bindings, boots and purple jacket

Snowboarding

2026 Snowboard Gear List: Boards, Bindings, Boots and Outerwear Worth a Look

A season-ready snowboard setup built from the bottom up: base layers, Strafe outerwear, Ride and Union boots, Union bindings, and two new Capita boards.

10/15/2026
32 Cold World snowboard standing upright on a grey studio backdrop

Snowboarding

32 Cold World Review: A Playful Hybrid Camber Board for Park Laps

The 32 Cold World blends classic camber underfoot with flat nose and tail sections for a predictable, butter-friendly ride aimed at intermediate park riders.

10/15/2026