Skis
Fischer RC 182 GT Review: A Frontside Carver for Intermediate and Advanced Skiers
A practical look at the Fischer RC 182 GT, a frontside carving ski with a wood core, two metal sheets, and a construction designed to stay accessible without giving up edge grip.
Introduction
The Fischer RC 182 GT is a frontside carver for skiers who want a little more width underfoot and a wider balance point without giving up edge grip on hardpack. It pairs a wood core with two sheets of metal and is aimed at intermediate and advanced skiers who spend most of their time on groomed trails. That describes a very large part of the skiing population, and the ski is built with enough range to serve a wide span of ability within that group.

It is not a specialist tool. The RC 182 GT is designed to feel capable and predictable across the whole of a normal resort day, from first lift to last, which is exactly why it makes sense for so many skiers.
Who This Ski Is For
The RC 182 GT suits intermediate and advanced skiers who stay on trail. If your days are built around groomed runs and you want a ski that holds an edge confidently and stays composed at speed, that is the rider Fischer is building for here.
It also makes sense for the skier who wants a slightly wider waist for stability, or for a bit more adventurous skiing, but does not want to step up to a stronger and burlier build. The 86 GT uses a thicker 0.8 mm metal layer, while the RC 182 GT uses 0.5 mm sheets. If weight and accessibility matter to you and you prefer a narrower platform, the 0.5 mm construction is likely the friendlier of the two.
Design and Construction
The RC 182 GT is built around a wood core with two sheets of metal. Fischer keeps the ski more user-friendly by ending the top sheet of metal before the tip and tail, tapering it into a central spine along the edges, and filling that space with Bafatex material instead.

Bafatex fibers are stiff, and Fischer weaves them into both the tips and the tails. The result is responsiveness and easier turn initiation without the weight or bulk that full-length metal would add in those zones. The same approach carries into the tail, where the metal runs into a central spine along the edges and hands off to Bafatex. Even so, this remains a stiff ski from tip to tail, so the response a frontside carver needs is still there.
Main Strengths on Groomed Terrain
Edge grip is the headline. The RC 182 GT holds on tight from tip to tail regardless of how icy the snow gets, helped by a long effective edge and minimal to zero taper and rocker.
The tail is squared off with a flat, blocky metal back, which gives you a lot of energy out of the turn. There is a small amount of rocker in the tip and tail. It is not enough to change how the ski behaves in powder or soft snow, but it does ease you into the turn. Camber sits underfoot, and the rocker begins roughly where the metal ends along the edges, a deliberate build choice that shapes the ski’s more forgiving personality.
Turn radius comes in at 15 to 16 meters in the 173 cm length, and the geometry feels stable and predictable. Weighing the ski together with the RSW 11 binding puts it at about 3,160 grams, which is on the heavier side of the spectrum. That weight is what you trade for stability and dampness on the downhill.
Things to Consider Before Buying
Weight is worth thinking through. At roughly 3,160 grams with the RSW 11 binding, the RC 182 GT is not a light ski. The payoff is dampness and stability, so if you value a planted feel at speed, that is a fair trade rather than a flaw.

The tip and tail rocker is minimal, so this is not a ski for soft snow or powder days. It is a frontside tool and it is at its best on groomed terrain. If you want a wider, more powder-oriented platform, look elsewhere in the range.
The 0.5 mm metal build is also less burly than the 0.8 mm sheets in the 86 GT. Stronger or heavier skiers chasing maximum power transmission may prefer the stiffer option, while lighter or less aggressive skiers will likely find the RC 182 GT more accessible.
How the RC 182 GT Compares Within the Range
Within Fischer’s lineup, the RC 182 GT sits as the narrower and more accessible option next to the 86 GT. The clearest difference is the metal: 0.5 mm sheets here against 0.8 mm there. The 86 GT is the stronger, burlier ski, while the RC 182 GT is the one to choose if you want something narrower, lighter in feel, and easier to manage while still getting metal-backed edge grip and a stiff tip-to-tail flex.
Buying Advice
Buy the Fischer RC 182 GT if you are an intermediate or advanced skier who spends most of your time on groomed trails and wants a frontside carver with a slightly wider waist, dependable edge grip on hard snow, and a damp, stable ride at speed. The 173 cm length with its 15 to 16 meter turn radius is a sensible middle ground for that kind of skiing.

If weight is a concern, or if you want a more accessible and narrower ski, this is the more logical pick than the 86 GT. If you want maximum strength and power and do not mind a burlier build, the 86 GT is the better match. Either way, the decision comes down to how much metal you want underfoot and how much weight you are willing to carry in exchange for stability.
Conclusion
The RC 182 GT does one job well: it gives intermediate and advanced frontside skiers a wider, more forgiving carving platform that still holds an edge from tip to tail. The Bafatex tip and tail construction keeps it responsive without the bulk of full-length metal, while the metal it does carry delivers the stability and dampness that confident groomed-terrain skiing depends on. If that matches how you ski, this is a straightforward ski to feel good about.
Product link
View more details for Fischer RC 182 GT
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Fischer RC 182 GT