Skis
Faction Dancer 1 Review: A Narrow All-Mountain Ski With Freeride Energy
The Faction Dancer 1 pairs an 86 mm waist and two thin metal layers with a lightweight poplar core, delivering energy and stability for firm-snow all-mountain skiing.
Introduction
The Faction Dancer 1 is the narrowest ski in the Dancer series, built around an 86 mm waist and two thin sheets of metal. It sits in the frontside and all-mountain part of the range, and it carries a clear freeride influence in its tip and tail shape. That combination gives it a livelier, more playful feel than the shape and build might suggest.
Faction does not build a dedicated frontside carving ski and has no race department to draw geometry from, so the Dancer 1 takes what the brand does well in its wider freeride models and scales it down into a narrower profile. The result functions as a frontside and all-mountain ski rather than a pure groomer carver.

For skiers who split their time between groomed runs and firmer variable snow, that positioning is the main appeal. The ski stays quick and agile at 86 mm underfoot while keeping the energy and stability that the wider Dancer models are known for.
Who This Ski Is For
The Dancer 1 makes the most sense for skiers who spend a lot of time on firmer snow. Its 86 mm waist and stiff flex reward edge grip and clean, arced turns, which suits regions where groomed and hardpack conditions dominate the season.
It is also a reasonable choice for progressing and improving skiers. The ski is maneuverable enough to build confidence on, but it carries a high performance ceiling for those who want to push harder as their technique develops.
Skiers who chase deep powder most days will likely want more width and float than this ski offers. The Dancer 1 is a firm-snow oriented all-mountain tool, not a soft-snow specialist.
Main Strengths
Energy is the headline trait. The Dancer 1 combines a lightweight poplar wood core with two layers of thin metal, a pairing that produces a strong amount of rebound without the weight penalty of a heavier metal build. Even with two metal sheets, the 170 cm length comes in at 1,682 g, which is a modest figure for a ski of this construction. Longer lengths will carry a little more weight.
That low overall mass, helped by the narrower profile, makes the ski quick, light and agile, while still feeling responsive and predictable. The Dancer series as a whole has built a strong reputation in this part of the Faction lineup, and the Dancer 1 follows the same formula in a narrower package.
Construction and Ride Character
Under the topsheet, the build starts with a lightweight poplar wood core, sandwiched between two layers of thin metal. A full sidewall runs underfoot, transitioning to a cap in the very tips and tails, and there is a barrier between the sidewall and the core that adds another layer of resistance and acts as an additional vertical laminate for performance.
The flex is notably stiff, and that stiffness is part of why the ski feels so energetic. Camber underfoot is high, and the point where the camber meets the sidewall-to-cap transition is what gives the tips and tails their extra agility and playfulness.

The freeride influence shows up in the tip and tail shaping. There is decent splay up front with width-appropriate rocker, and the shape stays round and slightly tapered, with more taper than many other 86 mm skis. The tail is round with minimal splay, just enough to keep it friendly when you need to release a turn.
At 86 mm underfoot, the 170 cm length carries a 14 m turn radius, a figure that grows as the length increases.
Things to Consider Before Buying
The stiff flex is the first thing to weigh up. It is a big part of what makes the ski feel energetic and stable, but it also means the Dancer 1 asks for a reasonably confident, active skier to get the most from it. Lighter or newer skiers may find it more demanding than a softer all-mountain ski.
Width is the second consideration. At 86 mm underfoot, this is a ski aimed at firmer snow and frontside terrain. If your typical day involves deeper snow, you will want to look at the wider Dancer models rather than this one.

Length selection also matters more than usual here. The 170 cm version tested is on the shorter side, and the shorter you go, the quicker and more maneuverable the ski becomes, at the cost of stability at speed. Longer lengths add both weight and turn radius.
Buying Advice
The Dancer 1 is a straightforward recommendation if your skiing is mostly frontside and all-mountain on firm snow, and if you want a ski that feels energetic without feeling heavy. It suits riders who value quickness and edge grip and who are comfortable driving a ski with a stiff flex.

If you already own a wider freeride ski for soft days, the Dancer 1 makes a sensible second ski for groomed and hardpack conditions. If you are looking for a single ski to cover everything including deep snow, consider whether an 86 mm waist is enough for the conditions you actually ski most often.
Conclusion
The Faction Dancer 1 takes the freeride character of the wider Dancer models and compresses it into an 86 mm all-mountain shape. A poplar core, two thin metal layers and a stiff flex give it a lively, stable ride, while the narrower waist and shorter lengths keep it quick and agile. For skiers who ride firmer snow and want a ski with real energy and a high ceiling, it is a well-judged option.
Product link
View more details for Faction Dancer 1
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Faction Dancer 1