Skis
Faction Agent 1 Review: A Lightweight Touring Ski Built on the Dancer Formula
The Faction Agent 1 pairs an 86mm waist with a lightweight wood core and full carbon laminate. Here is who it suits, what it does well, and where it gives ground.
Introduction
The Agent series takes the footprint of the Dancer series and rebuilds it around a lighter construction. The Agent 1 is the narrowest expression of that idea: an 86mm-waisted ski aimed at skiers who want to earn their turns without giving up an energetic, composed feel on the way down.
That approach has become familiar across the ski market. Brands have been taking existing all-mountain and freeride shapes, removing weight, and making them more amenable to skinning, backcountry, and touring use. The Agent 1 follows that path closely, keeping the camber and shaping principles of the Dancer line while trimming mass for better uphill efficiency.
Who the Faction Agent 1 Is For
The 86mm waist is the detail that defines this ski. It is narrow by deep-snow backcountry standards, so it is not the tool to reach for if your tours are built around chasing powder. It fits far better with resort touring, where you skin up a trail and ski back down the same terrain, or with backcountry days where you do not expect to find a lot of deep snow.

It also makes sense for skiers who already own a wider freeride ski and want something lighter for longer approaches and more efficient climbing, without stepping all the way down to a dedicated race-bred touring shape.
Main Strengths
The headline strength is balance. Removing weight from a ski normally costs stability, power, and downhill performance, and that trade-off is real here. What the Agent 1 gains in return is versatility: the backcountry component widens what the ski can do without turning it into a one-dimensional climber.
Energy and rebound are the other standout. The carbon laminate keeps the ski from feeling like a floppy noodle, and that stiffness is genuinely useful in softer snow, where a ski with some backbone does not sink down as much. Carbon in the layup also improves the efficiency of your stride, which matters when the skin track stretches out ahead of you.
Construction and Ride Feel
The core is a lightweight wood build, lighter than the construction used in the Dancer series. In place of two sheets of metal, the Agent 1 uses a full carbon weave, so the laminate package is built around saving weight rather than around dampening metal.

Camber and shaping carry over from the Dancer line. A long section of positive camber runs through much of the ski, with rocker kept modest and appropriate rather than exaggerated. The camber is a little less dramatic than on the Dancer, but it runs the same length, so the ski still carries plenty of built-in energy. Rocker and taper are standard rather than extreme, which places this firmly in the all-mountain range instead of the heavily rockered freeride shapes in the same family.
Weight and Uphill Efficiency
At 170cm, the Agent 1 weighs 1,320g. That sits comfortably below the 1,500g mark often treated as the rough threshold for a ski being light enough to tour on, and the difference shows up on long ascents.
That weight also shapes how the ski should be built up. Pairing it with a lighter weight setup works better than reaching for a hybrid compromise. A hybrid binding in the Shift style or a Marker Kingpin would be fine and would emphasize in-and-out-of-bounds use, but to really accentuate the ski’s lightweight character and touring nature, a pin-oriented binding and boot combination is the more natural match.
Things to Consider Before Buying
The narrow waist is a limitation as much as it is a design choice. If your backcountry plans involve deep snow, 86mm underfoot will feel like a compromise, and a wider ski in the same touring spirit would serve you better.

Weight savings also come with a ceiling on downhill performance. Compared with a heavier all-mountain ski, the Agent 1 gives up some stability and power, which is the expected cost of a build designed around uphill efficiency. It rewards skiers who accept that trade rather than those who want one ski to do everything at full strength.
Setup and Binding Pairing
Think about the whole system before committing. The ski’s low weight is easiest to appreciate when the rest of the setup is not fighting it, which points toward lightweight boots and touring-oriented bindings.
A hybrid binding can still work here, and it keeps the door open to lift-served days. The trade-off is that a heavier binding erases some of the advantage the ski was built to deliver, so the decision comes down to how much of your time is spent in bounds versus on the skin track.
Buying Advice
Match the ski to the terrain you actually ski. If most of your days involve skinning up a resort trail or touring terrain that rarely holds deep snow, the Agent 1’s 86mm waist and low weight line up well with that use.

If powder is the whole point of your tours, look at a wider option instead. And if you are building a setup around this ski, plan for pin-oriented bindings and boots so the lightweight build can do what it was designed to do.
Conclusion
The Faction Agent 1 is a focused answer to a specific question: how light can a familiar all-mountain shape become before it stops feeling like itself. The answer here is a ski that climbs efficiently, holds energy through its long camber, and stays composed in softer snow, as long as you are not asking it to float through deep powder. For resort touring and drier backcountry terrain, that combination is a genuinely practical one.
Product link
View more details for Faction Agent 1
This product is mentioned in the review. Check the specifications, options, and compatibility before buying.
View more details for Faction Agent 1