Snowboarding

Clew Step-On Snowboard Bindings: Why the Top Release Changes Everything

A closer look at Clew's step-on bindings, from the top-mounted release to strap compatibility and boot flexibility, plus the trade-offs worth knowing before buying.

Pair of step-on snowboard bindings on a neutral grey surface

Introduction

Traditional strap-in snowboard bindings have some long-standing annoyances: unstrapping every time you reach the chair, kicking the highback down, and sitting in the snow to strap in after every ride down. Step-on systems aim to fix all of that, and the Clew step-on bindings take a slightly different approach that makes them worth a serious look.

The Chairlift Problem Solved

The biggest day-to-day benefit of a step-on system shows up at the chairlift. With the Clew bindings, the release sits at the top of the binding, so you can pop out easily and skate to the chair. In systems where the release sits at the base, getting out can actually be harder. Having the release up top makes it genuinely easy.

Because the highback is on your boot rather than on the binding, there is nothing to kick down when you sit on the chair. Your board also ends up noticeably lighter on your leg while riding the lift, since the highback weight rides on your boot instead of hanging off one leg with the board.

Snowboarder riding away from a chairlift without stopping to strap in

Getting off the chair is where most snowboarders lose the most time. With a step-on system you come off the lift and step straight into the board, then ride away without stopping to sit down and strap up. There is also no highback to reach down and lift up before you step in: you just dig in and go, which is what a true step-on should feel like.

How to Strap In Quickly

The technique is simple. Find a mellow spot, put the board down and stop it with your toe so it stays ahead of you. Strap in your front foot first, then turn around, dig a slight ledge, and go toe-heel to lock in. Being on the ledge keeps you balanced and ready to ride.

Close-up of a snowboard boot stepping into a step-on binding baseplate

Straps as a Backup on Deep Powder Days

Like any step-on binding, snow can get into the base and make it harder to click in, so you do need to clear snow out before stepping in. The nice thing about the Clew system is that you have options. On deep powder days you can simply use the straps instead, which still tighten up even with a bit of snow under your foot and give you that locked-in feeling.

The fixed toe hook is another useful detail. The toe stays in place and you use the toe strap as leverage: put your toe in first, which gives you leverage to press your heel down, then cinch the straps. Once set in the morning, the straps stay in the same place all day, so they feel tight and consistent on your boot every time you clip in.

Boot Compatibility

A common drawback of step-on systems is that they force you into step-on specific boots. The Clew system works differently: you can use any boots. Paired with a comfortable boot like the Vans High Standard Pro, the system integrates well. You tighten the straps normally the first time in the morning, and after that the step-out feature lets you clip in and out with ordinary boots.

Getting Around the Mountain

One of the less obvious benefits is how easy it becomes to move around when there are short walks or little hikes across flat stretches. You pop out, walk, and you are back in and riding in seconds.

Snowboarder walking across flat snow between runs wearing boots and board

Things to Consider Before Buying

Step-on bindings are not flawless. Snow in the base can block a clean entry, and deep powder days may push you toward using the straps rather than the step-in mechanism. If most of your riding happens in deep snow, weigh that against the convenience. But if chairlift efficiency and easy laps matter to you, the Clew system addresses nearly every classic strap-binding complaint while keeping straps as a fallback.

Buying Advice

If you spend most of your time at a resort riding lifts, the Clew step-on bindings make a strong case. The top-mounted release, boot compatibility, and strap backup make them flexible enough for mixed conditions. Deep powder riders who rarely want to bother with the step-in mechanism should think it through, but for everyday lift-served riding the convenience is hard to beat.

Conclusion

The Clew step-on bindings take the standard step-on pitch and add smart touches: a release at the top, a highback on the boot, no highback to lift, and usable straps for deep snow. The result is a system that makes ordinary resort riding just that little bit easier, run after run.

Product link

View more details for Clew

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Clew

Further reading

Related Reviews

Snowboard gear flat-lay with board, boots, bindings and goggles on concrete

Snowboarding

2025 Snowboard Gear List: Five Picks That Earned Their Place on the Mountain

From Zeiss-lens goggles to a hybrid step-in binding, here are five pieces of 2025 snowboard gear that held up across a full season of riding.

10/15/2026
Flat-lay of snowboard gear including board, bindings, boots and purple jacket

Snowboarding

2026 Snowboard Gear List: Boards, Bindings, Boots and Outerwear Worth a Look

A season-ready snowboard setup built from the bottom up: base layers, Strafe outerwear, Ride and Union boots, Union bindings, and two new Capita boards.

10/15/2026
32 Cold World snowboard standing upright on a grey studio backdrop

Snowboarding

32 Cold World Review: A Playful Hybrid Camber Board for Park Laps

The 32 Cold World blends classic camber underfoot with flat nose and tail sections for a predictable, butter-friendly ride aimed at intermediate park riders.

10/15/2026