Best Online Tool Deals Right Now: Metabo HPT, Makita, and DeWalt Picks

Introduction

In-store tool deals have been unusually quiet lately, but Amazon has quietly become the better hunting ground. Right now there is a solid spread of discounts across Metabo HPT, Makita, and DeWalt, covering everything from a drill and impact driver kit to a jobsite blower, a multi-tool, a heat gun, a radio, a rear-handle circular saw, bit sets, a cordless compressor, and an impact driver. Here is what actually stands out and who each pick suits.

Top Pick: Metabo HPT Drill and Impact Driver Kit

This Metabo HPT kit has crept down in price from around $98 to $97 to $96, and it currently sits at $96.87, which is a genuinely strong price. You get the two new compact 2.0Ah batteries with a fuel gauge, plus the charger and the brand’s lifetime tool warranty.

For context, the two batteries alone sell for roughly $70 with a charger, so even if you already own decent tools, this kit is arguably worth it for the batteries. If you just need a drill and impact driver without paying for something overbuilt, but you also do not want bottom-tier tools, this is probably the best-value deal available right now.

Metabo HPT Jobsite Blower

Most brands sell a very similar compact jobsite blower, often from the same manufacturer, and this is one of the cheapest versions seen yet. It usually sits around $80 to $90 and is currently down to $60 on Amazon.

These small blowers are not powerful enough for clearing leaves or sidewalks, but they are genuinely handy for blowing out a truck bed, cleaning off a tool chest, and quick cleanup tasks. For occasional use around a truck or bench, one of these is easy to justify at this price.

A Genuine Improvement: Metabo HPT Cordless Multi-Tool

Oscillating multi-tools are usually tools to tolerate rather than enjoy, but Metabo HPT has clearly raised its game here. It runs very smooth with low vibration, and it cuts noticeably better than the older generation the brand offered.

It has been listed as a limited-time deal for at least a month, so it is worth checking a price-tracking tool to confirm you are seeing a real discount rather than a slightly inflated baseline. Still, between the smoother running, better cutting performance, and a lower price than the previous model, this is one of the better multi-tools tested recently.

Metabo HPT Cordless Heat Gun

Cordless heat guns have become a category trend, with Milwaukee, DeWalt, and Maki all selling versions, some of them quite expensive. Metabo HPT’s entry costs $84, making it one of the cheapest cordless heat guns out there, and it carries the brand’s lifetime tool warranty.

If a heat gun is on your want list and you would rather not spend premium money, this is an easy recommendation at this price point.

A Solid Value: Metabo HPT Bluetooth Radio

Recently picked up at $67, this Bluetooth radio works well and delivers good battery life. The one consistent weakness, echoed in plenty of user reviews, is volume: even with your phone at max and the radio turned up, it does not get especially loud compared with many standalone speakers.

Where it earns its money is build quality. It feels solid enough to survive being dropped on site, and the lifetime warranty is there if it does not. It is a single-speaker unit rather than stereo, so keep expectations realistic, but for around $60 it is hard to complain.

Makita Rear Handle Circular Saw

Not exactly a deal, more a going price, but the Makita tool-only rear-handle circular saw sits at $121. Makita originally launched these saws at $189 before the price climbed to $250 and then $300, so the tool-only price is reasonable if you already own Makita batteries and just want another saw.

For comparison, the Metabo HPT rear-handle saw runs around $200 and Milwaukee versions are roughly $230 to $250, which makes Makita one of the cheapest rear-handle saws available. It is also simply a good saw, with a strong track record of reliable performance.

Makita XPS 60-Piece Bit Set

Makita has finally refreshed its XPS bit sets with a clear case, and it is a welcome change: you can see exactly what is inside at a glance. The bits themselves are essentially the same as the earlier 45-piece sets, but for slightly more money the 60-piece version gives you more coverage.

At typical deal pricing, spending around $40 to $50 here leaves you stocked with bits for the next year. If you go through impact bits regularly, it is a sensible grab.

Makita 31-Piece Impact Set

This is a novelty with substance: a 31-piece impact bit set packaged in a box shaped like a Makita battery, complete with the familiar lettering. It is an Amazon exclusive, so it can only be found there.

One caveat worth flagging: reviewers have confirmed the battery-shaped case does not slide into Makita tools, so do not buy it expecting that. At $30 for 31 pieces it is not a bargain, but it makes a genuinely fun gift for a Makita fan.

DeWalt Cordless Air Compressor

This would rank second among cordless air compressors, but it is arguably more useful than the Milwaukee competitor, which does pure high-pressure inflation better. The DeWalt adds a low-pressure, high-volume mode plus a built-in light, which makes it more versatile overall.

It sat at $99 for a long while and is now around $121, roughly its average street price. If you have moved to cordless nailers and mostly need air for topping up car tires, the occasional ball, or a float, this is a very practical way to ditch the full compressor.

DeWalt DCF845B Impact Driver

Coming in under $100, the DCF845B is DeWalt’s strong upper mid-range impact driver. It gets consistently good reviews, offers selectable modes, and a newer 860 model is expected to arrive soon, which may push this one down further.

If you are invested in DeWalt batteries and want a dependable, heavy-duty daily-use impact driver without flagship pricing, this is an easy pickup.

Buying Advice

The Metabo HPT drill and impact kit is the standout of the bunch thanks to its battery value and lifetime warranty. Blower, heat gun, and radio buyers should strike while the prices are low, since these compact accessories rarely drop far. Makita owners will find the rear-handle saw and bit sets the most practical, while DeWalt users should weigh the versatile compressor against the DCF845B depending on whether air or driving is the bigger job. It is also worth keeping a small contour gauge set (a two-pack can be had for about $10) and a bulk pack of 4-1/2 inch cut-off wheels around, since cheap consumables like those tend to pay for themselves the first time they save a project.

Conclusion

Deals have been slow overall, but this batch covers real gaps: a kit with free-battery economics, several sub-$100 Metabo HPT accessories, honest Makita consumables and a cheap rear-handle saw, and two practical DeWalt buys. Match the purchase to your battery platform and the deal becomes easy to justify.