Best Garage Jacks and EDC Tools Worth Buying Right Now

Introduction

A good floor jack and a few well-chosen pocket tools quietly make every garage session easier. This roundup focuses on a standout sale jack from the Harbor Freight Daytona lineup, its closest rivals, and a handful of smaller tools that punch well above their price.

Daytona 3-Ton Long Reach Low Profile Jack

The Daytona 3-Ton Long Reach Low Profile Jack is currently on sale for $160, roughly $110 off its $280 list price, making it one of the cheapest prices it has seen. It is the second most expensive jack in the Daytona range, but the extra cost buys real capability: a minimum saddle height of 3 3/8 inches, a maximum lift of 24 1/4 inches, and a noticeably longer reach than the Super Duty. At a typical 4-inch lift point, it slides roughly 14 inches under the vehicle, which matters enormously on low cars where the jack points sit far inboard.

The smaller jack pad is another quiet advantage. On cars with puck-style lift inserts or delicate body seams, a compact pad is exactly what you want, and it also helps avoid crushing nearby fuel or AC lines. It comes with a foot pedal for quick positioning, a two-piece handle, and a 90-day warranty like the rest of the Harbor Freight jack range. These are 100-pound-plus shop jacks, not something to toss in the trunk for track days, but as a garage jack this is the pick of the litter.

Daytona 3-Ton Super Duty Jack

The Super Duty is the most expensive Daytona at $300 list and the only one with a 3-year warranty, which likely explains much of the price premium. Build quality and lift capacity are nearly identical to the Long Reach, with the same lift cylinder design and a 3 3/4-inch minimum height topping out at 23 1/8 inches. Its big jack pad suits trucks, large sedans, and frame lifting, and it pumps up slightly faster per stroke. For heavy-duty lifting without clearance concerns, it remains a solid choice, though for most buyers the Long Reach does more for less.

K-Tool International 2-Ton Low Profile Long Reach Jack

The K-Tool International 2-Ton Low Profile Long Reach Jack is an excellent jack and arguably the reach champion. With pads in the same position, it still measures around 3 1/2 inches at the rear of its arm, giving it even more usable reach than the Daytona, approaching 21 inches to the edge of the jack pad in real testing. It lifts to the same maximum height as the Daytona Long Reach and has a very similar lift ratio.

It is available in a 3-ton version as well, but it is significantly more expensive than the Daytona. Both are great jacks; the choice comes down to whether that extra reach is worth the premium for your vehicles.

Icon 52-Piece 1/4-Inch 2.0 Bit and Socket Set

The Icon 52-piece 1/4-inch 2.0 bit and socket set at $60 is the other item genuinely worth grabbing during the sale window. The included sockets are quite good, with metric and standard sizes going up to 14mm, and the compact case layout is well thought out. The supplied inline driver is fine for emergency use, but the real move is pairing these sockets and bits with a proper ratchet for everyday work.

KS Tools Pivot Head Ratchet

A natural companion to that socket set is the KS Tools Pivot Head Ratchet, which fits perfectly in the Icon case and adds an extension-capable pivot head. Put a socket on it and you get real leverage instead of wrestling with the inline driver. It ships from Amazon Germany even when ordered through the US site, so expect slower delivery than typical Prime, but in initial use the ratchet feels excellent, with back-drive no worse than competing designs.

Cool Tools of the Day: Wuben G5 and Oknife U1 Ultra

The Wuben G5 is a $20 micro flashlight with a swivel head, adjustable multi-position clip, USB-C charging, and a lockout mode. A single press fires it to 400 lumens in turbo, which is the mode that matters most. There is also a slide-lever brightness adjustment and an RGB color mode, but the core appeal is durability, magnetism, and clip versatility at a friendly price.

The Oknife U1 Ultra, at $55, is the newest release in the U1 utility knife family. It uses a flicker tab plus push-button release and comes with a carbon ceramic blade in a very heavy-duty proprietary aluminum body. The ceramic blade is razor sharp, flips over for a fresh edge, and replacements are inexpensive. The U1 Pro remains on sale at $28 (15% off) and the standard U1 sits at $25, though neither includes the ceramic blade, which is sold separately and widely considered a worthwhile upgrade.

View more details for Wuben G5

Buying Advice

For most home garages, the Daytona 3-Ton Long Reach Low Profile Jack at its sale price is the easy recommendation: lower, higher, and longer-reaching than the Super Duty at less money. If you mainly lift trucks and large sedans, the Super Duty’s bigger pad and warranty make sense. If maximum reach matters more than budget, look hard at the K-Tool. On the smaller side, the Icon set plus the KS Tools ratchet covers fastener work neatly, and either the Wuben G5 or an Oknife U1 earns a permanent pocket spot. Older Pittsburgh jacks at lower price points still work fine for basic DIY, but the metal, welds, and structure are noticeably lighter duty than the Daytona’s.

Conclusion

Very few of these picks require a hard decision. The Long Reach Daytona is arguably the jack for most people right now, the Icon bit and socket set is a strong sale buy, and the Wuben G5 and Oknife U1 Ultra round out a genuinely useful workshop and pocket loadout.