The Best Belt Carry Kit for Getting Things Done: Flashlight, Multi-Tool and Pen

Introduction

Some jobs do not justify a trip to the toolbox. Assembling furniture, basic electrical work, fixing something around the house or working on the car or the bike all fall into that category of small tasks where the right tools on your belt mean fewer trips and less fuss.

That is the idea behind this belt carry kit: a flashlight, a multi-tool, and a pen, each chosen as a best-in-class option for its role, all held in a single handmade leather holder. Nothing here pretends to do everything, but every element is genuinely capable, compact, and close to hand. The full combination is a premium setup, so it is worth understanding what each piece delivers before committing.

The Flashlight: Olight Warrior Mini 2

The Olight Warrior Mini 2 is one of Olight’s best-selling lights, and it earns that position. It runs on a customized 18650 battery, which makes it a mid-sized light with a great balance between size and practical application. In turbo mode it outputs a maximum of 1,750 lumens, and it holds that output for around four minutes before stepping down, which is impressive for this class. At the other end, a dedicated moonlight mode runs at 1 lumen, with a maximum continuous runtime of up to 45 days.

Access is a real strength. Both turbo and moonlight can be reached directly, so you get instant full power when you need it and quiet low light without stepping through brighter levels. Between the two extremes there are three general levels, with the medium setting at 120 lumens running for a very respectable 19 hours continuously. There is also a strobe mode and a textured bezel if you see a flashlight as a self-defense tool.

Operation comes from both a tactical tail switch and a side switch. A half press on the tail switch recalls the previous level, a full press jumps to turbo, and the side switch handles the rest: double press for turbo, triple press for strobe, press and hold for moonlight or stepping through levels. Press and hold also locks the light out so it cannot accidentally activate in a pocket or case, and the side switch has a built-in indicator for battery life.

The Multi-Tool: Leatherman Skeletool CX

For a belt carry kit, heavy files and saws stay in the toolbox. What is needed here is core functionality in a compact, lightweight, tough package, and the Leatherman Skeletool CX fits that brief almost perfectly.

The CX is a slightly upgraded version of the standard Skeletool, with a 154CM blade steel that offers improved edge retention. It also carries a very decent pair of needle nose pliers with built-in wire cutters, nothing exotic but genuinely capable. The screwdriver uses Leatherman flat bits, and two double-ended bits are built into the body, effectively giving four screwdrivers without hunting for anything else. A carabiner doubles as a bottle opener, and there is a belt clip as well.

Pricing differs noticeably by region. In the UK, Skeletools start at around 90 pounds, with the CX at 120. In the US they start at 75 dollars, with the CX at 90 dollars plus tax, and the fact that they are made in the USA helps explain that gap. One note for UK readers: the blade is locking, which means it cannot legally be carried outside the home without good reason. If that is a concern, the Leatherman Bond has a non-locking blade, is slightly bulkier and heavier, and still fits the holder featured here.

The Pen: Big Idea Design Dual Side Clip Mini

The pen choice is shaped by the belt holder, which has an open-bottom pen slot requiring a clipped pen. The pick here is the Big Idea Design Dual Side Clip Mini, a titanium pen that is lightweight, well made, and a genuine pleasure to use.

It takes the D1 refill, which is easy to find and available in many options, so you can run your favorite refill without compromise. It is not a cheap pen at 75 dollars, but it is a keeper, and it slots into the holder perfectly. A full-size bolt action pen from the same brand also fits, though it can look a little long, and the maximum pen diameter for the slot is around 0.45 of an inch.

The Belt Holder: Tale of Knives Jax Tux Clip

Tale of Knives makes some of the highest quality belt carry gear available, with each piece handmade on the west coast of the United States. The company specializes in everyday carry leather goods for when pockets are not enough.

The Jax tux clip shows that pedigree immediately. The stitching is substantial, the belt clip on the back is robust, and the leather edges are burnished and sealed. The Skeletool fits perfectly, and the Warrior Mini 2 starts tight but stretches into a very snug fit over time, just be careful that nothing presses on the side switch. From above, the flashlight looks like it might interfere with the belt, but in practice it works fine.

The holder has a front pen slot open at the bottom, so a clipped pen is required, and it accepts a full-size pen including a Sharpie, though the Sharpie is a bit tight. It is available in various color options and costs 118 dollars.

Buying Advice

This complete kit comes to 373 dollars plus tax in total, or potentially around 420 pounds in the UK. That is a serious outlay, but every component is a premium item in its own right, and each can be swapped for a preferred alternative: the Baton 3 Pro actually fits the holder slightly better thanks to its shallower head, and the Leatherman Bond works if the locking blade is an issue.

The smarter approach may be to treat this as a template. Pick the holder, then match the flashlight, multi-tool, and pen to your own priorities and local carry laws.

Conclusion

A well-chosen belt kit earns its place by keeping core tools within reach for the small jobs that would otherwise mean a trip to the toolbox. The Warrior Mini 2, Skeletool CX, Dual Side Clip Mini, and Jax tux clip each excel in their role, and together they make a belt carry solution that is genuinely useful day to day, as long as the premium pricing fits your budget.