Skis

Atomic Bent 90 Review: A Light, Playful 90 mm All-Mountain Ski

The Atomic Bent 90 narrows the Bent 100 formula to a 90 mm waist, and the result is a quick, forgiving ski for moguls, trees and park laps at a $499 price point.

Atomic Bent 90 twin tip skis with bindings laid on a concrete surface

Introduction

The Atomic Bent 90 takes the shape and construction that made the Bent 100 a reference point for playful all-mountain skis and narrows the waist to 90 mm. What comes out is a lighter, quicker ski that keeps the forgiving flex, the camber underfoot and the twin tip tail, while trimming enough surface area to make short turns feel immediate.

It is listed at $499, which is approachable for a ski with this much range. It is not a firm-snow carving specialist, and it is not a powder floater. The terrain it handles comfortably, though, is unusually broad: bumps, glades, park laps and softer groomers.

Who the Atomic Bent 90 Is For

This ski suits riders who split their day between moguls, trees and the park, and who would rather have a light, maneuverable platform than a stiff, directional charger. If your typical run involves quick short-to-medium radius turns, tight lines through hardwoods, or lapping a terrain park, the Bent 90 is built for that rhythm.

It also works for skiers who want a single playful ski that stays fun when conditions are not perfect. The camber underfoot gives it energy on softer groomers, and the rockered tip and tail keep it loose when the snow gets variable.

It is less suited to riders whose priority is standing on the ski at speed on hardpack, and to anyone shopping for a dedicated deep-snow ski. A 90 mm waist is a versatile width, but it is not a powder width.

View over a snowy mountain with moguls, glades and groomed runs below

Riders who prefer narrower skis for quicker turn shapes tend to get along with it well. The same goes for lighter and intermediate skiers who want a ski that responds without demanding a lot of input, and for anyone who wants a park-capable ski that still holds up outside the park.

Main Strengths

The build is straightforward and proven rather than exotic. There is a poplar wood core running tip to tail, with a window in the topsheet that shows the wood. DuraCap construction blends a partial vertical sidewall underfoot with cap construction wrapping the rest of the ski, which helps it shrug off abuse. Horizon Tech appears in both the tip and the tail, and there is a healthy amount of camber underfoot. Rocker is listed at 20 mm in the tip and 10 mm in the tail, with the tail reading more like a modest twin tip.

Light and Quick Edge to Edge

The first thing most riders notice is the weight. The Bent 90 is light in the hand and light underfoot, which makes it easy to move around and quick from edge to edge. That lightness does not translate into fragility: the DuraCap construction and the core give it a burly enough feel that it can be skied hard without feeling like it will fold.

A 184 cm length carries a 21 metre turn radius, which is longer than many skis in this class. In practice the camber and the snappy flex pattern make it feel considerably more nimble than that number suggests, especially when you shorten the turn shape yourself.

Moguls and Bumps

This is where the ski makes its strongest case. At 90 mm underfoot it is fast and agile in a bump line, and the flex is the reason. The very front of the ski, where the vertical sidewall ends and the cap construction begins, is softer than the rest. Underfoot and through the tail, there is enough support to drive the tips into the front of a bump and push the tails down the backside without the ski pushing back.

That combination lets you keep the ski on the snow and follow the line of the mogul rather than fighting it. It holds up under a heavier rider as well, so a larger skier can stay confident driving it in tight, uneven bumps without feeling like the ski is collapsing.

Mogul field on a ski slope with fresh tracks in soft dusk light

Softer bumps, hard bumps, tight lines and wide lines all work. The ski stays centered and balanced through the whole turn, which is exactly what you want when the terrain is forcing you to make fast decisions.

Trees and Soft Snow

In the trees, the narrow waist and the Horizon Tech tip pay off. The ski gets around quickly, which matters when you are threading through narrow gaps and following faster company through tight hardwoods. It floats better than its width suggests in softer snow, and it stays composed when you open up the turns on wider-spaced glades lower down.

It is not a deep-day ski, and it is not trying to be. What it does well is stay predictable across mixed conditions, from fresh pockets to tracked-out chop, without demanding a change in technique.

Park and Freestyle

The Bent 90 was not designed specifically as a park ski, yet it works remarkably well in one. The light swing weight makes spins and switch takeoffs easier to control, and the Horizon Tech tip adds a twisting forgiveness at the very front of the ski that helps when a takeoff or landing is not perfectly square. Instead of catching an edge and throwing you off balance, the ski tends to wash around and keep you moving.

The same forgiving character shows up in the tail. Even with more ski behind you, the straighter tail cut and the Horizon Tech construction keep it from feeling catchy on landings or in switch. It is also a shape that has shown up in big air and slopestyle competition, which says something about how much range the platform has.

Ski terrain park with rails and jumps under soft morning light

For riders who are newer to the park, the forgiving flex makes it a friendly place to start. For experienced park skiers, the light weight and quick response keep it interesting. That spread is unusual in a single ski.

Things to Consider Before Buying

Mount point changes this ski more than most. There is a 10 cm range of mounting positions. The factory recommended line sits at minus 4, and the forward limit is plus 6, which lands roughly 1.5 cm back from true center. Mounting forward shifts the ski toward park duty: it improves switch performance and quickness but puts less ski in front of you, which reduces how hard you can pressure the tip in a carved turn. Mounting back adds float and stability but puts more ski behind you, which can make moguls and trees more demanding.

Firm groomers are the clear weak spot. On hard, fast snow, a heavier rider can push past the tip and lose some of the ski’s composure, and it will not deliver race-style long-radius carves the way a stiffer directional ski will. Riders who spend most of their time on hardpack are better served by a dedicated frontside or all-mountain carving ski.

The 90 mm waist is a deliberate compromise. It is a genuinely good width for mixed terrain and softer snow, but it will not float like a wider freeride ski on a deep day.

Length is worth a thought too. A 184 cm was comfortable even for a larger rider at around 6’2” and 225 pounds, so sizing up slightly is reasonable if you are between lengths. Very tall or very heavy skiers may still want more ski than the longest available option.

Buying Advice

At $499, the Bent 90 sits in a price band where a lot of skis are either beginner-friendly but limited, or capable but stiff and unforgiving. This one is neither. It is a light, playful, durable all-mountain ski that covers bumps, trees, park and softer groomers with the same tool.

Pair of skis on a wooden workbench with bindings and tuning tools

Bindings matter here. A lower stand height and a shallower ramp angle suit the ski’s quick-turn character, and a solid, confidence-inspiring click-in is worth prioritizing. If you want to use the ski for uphill travel in the trees, a touring-capable binding can work on this platform.

Choose your mount point based on how you actually ski. If you want strong carving performance, stay near the factory line. If park and switch skiing matter most, mounting forward is the right call. Anything further back than the recommended line is hard to justify given how little ski ends up behind the heel piece.

Conclusion

The Atomic Bent 90 is a narrow, playful all-mountain ski with a forgiving flex, a light feel and a wide range of applications. It is at its best in moguls, trees and the park, and it stays fun on softer groomers. If that describes your season, it is an easy ski to feel confident about, and at $499 it is a sensible way to cover a lot of terrain with one pair.

Product link

View more details for Atomic Bent 90

This product is mentioned in the review. Check the specifications, options, and compatibility before buying.

View more details for Atomic Bent 90

Further reading

Related Reviews

Armada Anti Matter 82 W ski standing on a neutral studio surface

Skis

Armada Anti Matter 82 W Review: A Light, Approachable All-Mountain Carver

Armada's Anti Matter 82 W pairs a lightweight Karuba and carbon build with an easygoing all-mountain shape, aimed at intermediates through lighter-footed advanced skiers.

10/15/2026
Pair of all-mountain skis standing upright on a concrete surface

Skis

Armada Anti Matter 88W Review: A Light, Playful 88mm All-Mountain Ski Plus Two Alternatives

The Armada Anti Matter 88W returns unchanged in spirit from its Reliance 88C days, and it remains one of the most versatile 88mm skis around. We also look at the Nordica Santa Ana 87 and Anti Matter 92 W as alternatives.

10/15/2026
Armada ARV 100 and Atomic Bent 100 skis side by side on concrete floor

Skis

Armada ARV 100 vs Atomic Bent 100: Which 100mm Freestyle Ski Should You Buy?

Two of the best all-mountain freestyle skis of the season compared: one leans playful and park-ready, the other holds up better everywhere else.

10/15/2026